«Drawers work well under a basin as you can see at a glance what's inside.The washstand comes ready assembled and the worktop has pre
drilled tap holes so you can choose your own taps to match other fittings.»
I have plenty of access but it is a grade 8 bolt so just
drilling a tap hole is a chore.
Not exact matches
A
hole is
drilled into the tree and a
tap inserted to allow the sap to flow.
A
hole is
drilled into the tree and a
tap inserted to allow the sap to flow into a bucket.
The
tapping we hear, as it turns out, is
drilling holes in our hearts.
If there is sufficient metal surrounding the bolt so fitting a larger bolt will not impact structural integrity centre punch it (so your
drill bit won't slip)-
drill it out and
tap a new thread in 3 stages to accept a larger bolt.Use a pilot
hole then ever larger
drill bits.Not applicable in all cases; but one option that has stood the test of time
If all else fails and the bolts break off in the
hole, you are more than likely bound to be taking off the part with the broken bolt in it and
drilling and
tapping the bolt out.
It requires
drilling and
tapping an extra
hole in the front crossmember, but the little bit of labor this took was well worth the added protection.
This freestanding bath is sold without
tap holes, however, they can be
drilled by a plumber on site, or by Royce Morgan on request.
4
Drill a 1» - deep
hole at either end of the dowel, ensuring the width of the
holes remains slightly smaller than the size of your locknuts;
tap in the locknuts using a mallet.
This bath does not come with
tap holes (though they can be
drilled when needed).
You can even have the option of left or right hand styles to suit your floor plan and some can have the
tap holes left, so you can decide where to
drill them to suit your own bathroom.