You don't need to sacrifice fashion for function; transform a patterned letter sorter into a desktop charging station by turning it on its side and
drilling holes in the back for wires to poke through.
The TV stand we purchased is actually a sideboard, so
we drilled holes in the back for our cords and moved the shelves to allow the far left compartment to fit a bin of Benji's toys.
I love how
you drilled the hole in the back allowing the phone to charge all nice and tucked away, you're genius!
I bought them at my local dollar store, spray painted them metallic,
drilled a hole in the back, inserted the screw in the back and voila!
Hide it in a deep filing cabinet next to the desk,
drilling a hole in the back for the cable to run out.
Drill a hole in the back of the box to make way for a power strip.
You can
drill a hole in the back for wires.
Not exact matches
In order for this system to be installed a
hole was
drilled into the
back of our house.
To bleach a tooth
in this manner, the dentist will
drill a
hole and put the Tooth White bleaching product into it (if it's's a front tooth, the
hole will be on the
back so you can't see it).
With the high SV look rear wing you actually get two options from DMC, you know there is an adjustable rear wing sitting flush with the body on the original Aventador, this item can be replaced with a DMC unit finished
in clear carbon fiber... but if the owner also orders the SV rear wing DMC will deliver this lower unit with pre-
drilled holes which make installing the SV wing very easy, and has the additional advantage you can fit the original wing
back in place as you didn't have to get
holes drilled into it.
Set the screws and wall anchors
in the wall at the points you marked, with the screws extending out 3/8» (1 cm), and hang the crate from the
holes drilled in the
back of the crate.
Around the
back is where you'll find the new 5 - megapixel camera sensor, which sits
in close proximity to one of the two redesigned speakers that now have a nicer - looking
drilled holed design that definitely adds to the Hudl 2's already pleasing aesthetic.
Amongst the many other brilliant works on show, Thomas Hirschhorn's is a standout, comprising a line - up of mannequins
in a grubby display case along the
back wall, lumps missing from their torsos, breasts, and necks, creating gaping
holes that
drill right through their bodies.
I got to
drill the
holes for hooks
in the
back of the wooden supports of Kiefer paintings.
Drill a small
hole in the plastic to allow the two wires to exit the
back of the radios panel when reassembled.
Connecting and disconnecting of
drill string using hydraulic powered tongs,
drill bits,
drill collars racking
back drill pipe into slots located on the board
in the derrick and setting test pumps down
hole in a timely manner safely and efficiently for contractors and customers.
I just
drilled a
hole in the top of the barrel and pulled the wires up through the convenient existing
hole in the
back.
Use the Kreg Jig to
drill pocket
holes on the
back of the first 4 boards — approximately 2 inches
in on each side.
The organizers came with
holes in the
back, so I just had to
drill some screws
in the wall (I also used wall anchors) and hang them.
Then we went
back and finished
drilling the
holes in the ceiling and added a drywall anchor.
Assemble the legs by
drilling a pilot
hole on top edge of
back legs, screw
back legs to front legs as shown
in diagram with 2-1/2» trim screws and glue.
We
drilled a small
hole in the
back for phone chargers and added this phone organizer we already were using and a spot for pencils, and change.
Also, once you
drill a
hole in the door or drawer face, you can't really go
back.