(You can set the soap on the
top edge of the mold where the shark is to help keep the shark soap in place.)
Once you've achieved your desired look, carefully place one shark soap into each of the four cavities of your mold so that the shark toys are positioned at the
top edge of the mold and the red soap bottom is positioned toward the middle of each cavity.
Run a sharp knife around
the edges of the mold.
Once the gelatin easily separates from
the edge of the mold, place your serving plate, upside down, over the top of the mold's base.
You should see it easily separate from
the edge of the mold.
The cold causes the soap to pull away from
the edge of the mold, if only enough for a final big nudge to do the trick!
Fill your chocolate molds with tempered chocolate, scrape off the excess from the edges, tap and shake for 15 seconds to release any air bubbles and ensure all
the edges of the mold are coated in chocolate.
Step 8: Then carefully pour the green soap around
the edge of the mold until it is the same height as the pink soap.