The more interesting measure is the mass of aluminium (as the membrane material between the two directions of flow in the heat exchanger) needed to build a plant with a 95 %
efficient heat exchanger able to remove ten tonnes of carbon per year from the atmosphere, bearing in mind that scrap aluminium currently costs $ 1500 / ton.
So as to optimise the quantity of exhaust gas recirculated and thereby achieve high recirculation rates, the exhaust gases are cooled down as required in a highly
efficient heat exchanger with a large cross-sectional area.
Looking for a larger more
efficient heat exchanger with a square core with more front surface area to flow through more easily at lower speeds.
The same plastic as in garbage bags makes
an efficient heat exchanger in power plants by creating microchannels.
Learn how our highly
efficient heat exchangers can help boost plant profitability in f
ENERGY STAR certified commercial water heaters include gas storage and instantaneous (tankless) units that use 25 percent less energy than a conventional commercial unit by employing more
efficient heat exchangers.
Not exact matches
Standing 105 inches tall and 72 inches wide, the OVEN - 2020 manages to be more energy
efficient by operating without a
heat exchanger.
Tetra Pak ® Plate
Heat Exchanger is a range of reliable and energy efficient plate heat exchang
Heat Exchanger is a range of reliable and energy
efficient plate
heat exchang
heat exchangers.
Compared to a plate
heat exchanger, a higher flow velocity is needed to create
efficient heat transfer in a tubular
heat exchanger.
For District
Heating and Cooling networks, HVAC and Industrial projects, that need an
efficient compact brazed plate
heat exchanger with close tempera...
Apart from the investment costs, an earth - air
heat exchanger is the most
efficient system.
«Our calculations showed that an earth - air
heat exchanger is the most
efficient system for confined livestock buildings.
The more
efficient fin - type
heat exchanger provides improved cold - weather performance and reduces time for coolant to reach operating temperature.
Not only does the ZR1 have a more -
efficient intercooler system with a
heat extractor hole in its hood, but it also packs four new radiators, bringing the number of
heat -
exchangers to 13.
To provide
efficient cooling, airflow is managed through 10 different
heat exchangers.
Efficient cooling openings at the front of the vehicle to maximize cooling airflow across the key
heat exchangers located within the front section (front engine radiators, twin motor unit cooler, condenser, the transmission gear cooler, hybrid Power Distribution Unit).
No less innovative is the charge - air cooling system used by AMG, which features a very
efficient air - water -
heat exchanger system.
A unique
heat exchanger that is inexpensive and very
efficient is used.
a direct water to air
heat exchanger is more
efficient in the WATER - > AIR direction partially due to evaporation but mainly due to the air being more mobile.
If I hadn't just paid $ 1500.00 to replace the
heat exchanger in my super doper energy
efficient furnace (somehow a hole developed on the back plate of the
heat exchanger......... acidic water from combustion or some X in my propane are the likely causes.........).
Even today, a few models still dry using large volumes of cold water to chill the
heat exchanger, as opposed to the
heat - pump technology employed by the most
efficient tumble dryers.