Supercharged — 240:  · 2ZZ - GE Supercharged engine, developed by Lotus Engineering  · Capacity: 1,796 cm3  · Max Power 243 hp (181 kW) @ 8000 rpm (DIN 70020)  · Max Torque: 174 lb ft (236 Nm) @ 7000 rpm (DIN 70020) Option — 190:  · 2ZZ - GE, 4 cylinder, dohc 4 valves per cylinder with variable valve timing and lift  · Capacity: 1,796 cm3  · Max power: 190 hp (141 kW) @ 7800 rpm (DIN 70020) Integral ducts to provide
engine air feed and cooling  · Max Torque: 138 lb ft (181 Nm) @ 6800 rpm (DIN 70020)
Bodywork  · Lightweight composite body shell  · Bolt on exterior body panels for ease of service and repair  · Integral ducts to provide
engine air feed and cooling
Not exact matches
Inside a gas turbine
engine, a combustor is
fed high pressure
air that is heated by constant pressure.
Advanced aerodynamic testing from Multimatic and Lola helped the team shape the body to
feed the intakes with as much fresh
air as possible, but it's just as important to extract the
engine's hot
air to prevent overheating.
Engine and gearbox > Mazda's decision to
feed its
engines air of atmospheric pressure make them revvy, but mid-range grunt is lacking.
Air is fed into the engine by a combined mechanical and electrically - driven turbocharging system with the exhaust turbine located near the exhaust and the compressor near the roof - mounted air inta
Air is
fed into the
engine by a combined mechanical and electrically - driven turbocharging system with the exhaust turbine located near the exhaust and the compressor near the roof - mounted
air inta
air intake.
Klaus confirms that the vents
feed air to or extract it from the 10 cooling units in the car: three
engine coolers (two water and one oil); two intercoolers; one transaxle cooler; one for the clutch; one for the twin electric motors; one for the electric A / C compressor; and one for the power distribution unit.
No more subtle are the large side intakes, dilated to
feed more
air to the 3.8 - litre
engine, and the rear diffuser, which stretches nearly the full width of the rear apron and conceals a pair of centrally - mounted tailpipes.
Then, the relative calm of our location is broken with the bark of twelve 250 - cc cylinders exploding into life, sucking
air and fuel through triple Weber carburetors to
feed a hungry 3.0 - liter
engine before calming to a subdued, unexpectedly quiet idle.
Unfortunately, the
air ducts that
feed the
engine just behind the coupe's passenger compartment couldn't be adapted to the Spider.
Edit: Coolant in some cars passes through a type of fast idle valve that raises and lowers a plunger (connected to some type of heat reactive wax that closes the airway fully when the coolant is at OT) through a tube that
feeds more or less
air through the
engine raising or lowering its speed.
Their primary role is to provide feedback to the fuel management to determine if the
air - fuel mixture being
fed into the
engine is being mixed in the right ratio.
There also appear to be functional
air intakes behind each door, which should help
feed cool
air to the
engine.
The rear windows have also been angled in towards the centre of the car to create a vent to supply
air to the
engine, while Ruf's signature
air intakes over the rear wheels
feed air to the intercooler.
Outside, the signature «kidney» style front grille — a BMW trademark — no longer
feeds air to an
engine, but instead houses various sensors that help to make autonomous driving possible.
At the wedge - shaped, near E26 M1 nose, a revised front fascia allowed for better channeling of
air into the massive intakes to
feed the
engine.
The previous Speed 3 used ducting in the hood to
feed the intercooler, which left no room for cold -
air plumbing for the
engine.
Intake
air is compressed and then
fed to the
engine via the respective charge -
air cooler.
With two conventional turbochargers positioned in the
engine's vee, a third is positioned to
feed air into the
engine at lower
engine speeds, and rather than be driven by exhaust gases as per the other two turbos, it is driven by a 7kw electric motor.
The new configuration not only provides for better airflow to the intercooler but
feeds the
engine with chillier intake
air as well.
Cues include a deep front spoiler carrying a trio of large ducts to
feed air into the
engine bay, a distinctive hood power dome, signature chrome gills behind the front wheel arches, widened fenders, an extended rear valance, four chromed tailpipes and 18 - inch forged alloy wheels.
Forming the upper part of the
engine lid, the wing is wider, has three instead of the previous five
air ducts to
feed cooling
air into the
engine bay and now extends variably for smoother introduction of additional downforce at the rear.
A new, forward - facing
air intake mounted behind the grille of the 2019 Ram 1500
feeds cooler
air to the intake of the system of the Pentastar V - 6 and HEMI V - 8
engines for improved performance.
You'll be able to tell apart the ICE Kona from the Kona Electric courtesy of a closed grille - no
air flux needed to
feed the
engine anymore, LED DRLs positioned above the LED headlights and a two - tone roof.
In order to help liberate the additional 40PS and 55Nm of torque over the standard XFR, larger front
air intakes in the lower bumper of the XFR - S allow greater volumes of
air to be
fed into the
engine.
* Form follows function: distinctive centre
air intake and vertical grilles
feed larger volume of
air (+ 10 %) to turbocharger intercoolers while bonnet vents extract hot
air from
engine bay * Subtly curved rear wheel arches with newly tooled side panels accommodate increased rear track of the uprated chassis and provide muscular stance * Distinctive «smoked steel finish» to all exterior «brightware», including the first automotive application of «Physical Vapour Deposition'to stainless steel * Larger, twin elliptical exhaust tailpipes and rear valance with discreet vertical divider * 2 new pearlescent and 2 new matt finish colours * Unique driver - focused, two - seater cabin with lightweight sports seats, giving a 45 kg (99 lb) weight saving * Rear seats replaced by stowage deck with carbon fibre luggage retaining beam * AlcantaraTM, carbon fibre and «Soft Touch» leather provide a very different interpretation of Bentley craftsmanship with choice of Single Tone and Duo Tone combinations
The front cooling
air intakes that
feed air into the
engine now feature active
air flaps that will help the driver better control the vehicle and improve its overall efficiency.
A layered - carbon trim panel covers the area around the five - cylinder
engine that sports a red valve cover, and two laterally arranged ventilation screens
feed air to the
engine.
As well as the LED headlights, Audi anoraks can spot the difference between the V10 and V8 models by pointing out the wider sideblades which
feed more
air into the
engine, oval shaped exhaust tips and a chrome trimmed grille.
It is very functional,
feeding cool
air to the 550 - horsepower LS supercharged crate
engine from GM Performance Parts.
Turbocharged
engines utilize a turbocharger that
feeds cooled
air into the
engine, which allows it to produce more power while still being able to run efficiently.
Most often we equate a large rev range with four or six - cylinder
engines but the massive kidney grilles in the front keep
feeding this 4.0 L 32 - valve monster with
air well past the 8,000 RPM mark.
A pair of Turbonetics T - 3 turbochargers blows through a custom
air - to -
air intercooler, force -
feeding the
engine about seven pounds of boost and lifting its horsepower level to about 425.
At the front the Viziv Performance concept features an aggressive face with a wide grille that
feeds air to the boxer
engine.
And then I notice something really special... Mansory doesn't even mention this in their press release, but the Carbonado Apertos shows two additional
air intakes mounted on the
engine cover, just behind the seats there are two triangular intakes
feeding air into the
engine compartment... is this a forced induction system or just a way of cooling the
engine even more?
Cool
air is key for performance, especially for the
engine and to provide a dense intake charge to
feed hungry turbochargers.
The shapes of these enlarged ducts, which
feed air to the intercooler and through the
engine bay, were wind tunnel tested to have the minimum possible impact on drag
A trifecta of radiators, one in the traditional location and two outboard
feeding air in from the lower grille opening, split the job of high - performance
engine cooling.
[13][30] The turbocharged
engine required larger
air intakes to
feed the two intercoolers.
In an era where the biggest craze is to reduce
engine capacity and force -
feed air in via a turbocharger, we're frequently bombarded with terms such as turbo - lag.
There's more than meets the eye in this apparent pair of NACA ducts that
feed air to the mid-mounted
engine; the black is actually one large duct and the body - colour «tendon» that arcs across is actually floating.
Viewed from the front, the Vantage S is distinguished by a new lower front bumper, which is finished in carbon fiber and houses a larger
air intake that
feeds the
engine and new 6 - piston front brakes.
The seamless aluminum hood is made up of two panels with integrated
air passages to
feed the
engine — typical Porsche detail touches.
The
engine is force -
fed fuel and
air via direct injection and a pair of twin - scroll turbochargers mounted in a «hot inside V» configuration.
A small, quick - responding turbo
feeds air to the combustion chambers at low
engine speeds to provide low - speed torque and eliminate turbo lag.
Jeep Performance Parts featured on the Nacho concept include a brawny hood that is accented with the standard black hood graphic featuring the all - new JPP badge, which is engineered to accommodate a cold -
air intake that
feeds the 2.0 - liter turbocharged I - 4
engine.
It will be replaced by a specially designed
engine intake manifold and
fed by twin - ball - bearing turbochargers with stainless - steel inlet piping, dual wastegates, electronic boost controller, an
air - to -
air intercooler, and dual K&N
air filters.
Included is a more prominent grille with a matte - aluminum frame and high - gloss black honeycomb insert, unique LED imbued headlamps, a deeper front bumper with large
air ducts to
feed cooling
air to the
engine and an integral splitter element for improved airflow along the underside of the car.
The car has also been equipped with a honeycomb grille and new
air ducts that
feed the
engine and the brakes.
Voluminous
air - cleaner box containing an oval filter with substantial surface area
feeds the
engine plenty of clean
air while reducing intake noise.