When you power the headphones on for the first time, they automatically
enter pairing mode, as indicated by the flashing blue and red light.
Once powered on and set to BT from the remote, the speakers
enter pairing mode.
Setting up the Sport Coach was simple; I just had to press and hold the multifunction button with the earbuds off to
enter pairing mode.
You'll long - press the power button to turn it on or off, and to
enter pairing mode, long - press the power button past the turning on and until the voice says «looking for music device».
It will automatically
enter pairing mode, which is a nice feature as well.
The earphones easily pop out of the frame, and can be wirelessly paired to your playback devices quickly; simply hold down the raised power button located on the left side of the neckband to turn them on, and continue holding the button until the earphones
enter pairing mode.
After you've successfully installed the Smart Lock, remove the magnetic faceplate and throw away the plastic battery separator tab so it can
enter pairing mode.
Inconsistent power on, never connecting, wouldn't
enter pairing mode.
To
enter pairing mode, push the power button up for two seconds.
As soon as you open the case for the first time the headphones
enter pairing mode, and every time after that all you have to do to connect is open the case.
You can turn on the headphones,
enter pairing mode, skip tracks, and control volume.
Holding the power button
enters pairing mode and as the MW60 support Bluetooth V4.1, it can pair with two devices simultaneously.
Holding the front - facing button powers on the device with a longer hold
entering pairing mode.
Not exact matches
An M -
mode also allows you to save preferred combinations, and they can then be easily accessed each time you
enter the car via a
pair of steering - wheel buttons.
This will
enter the controller into
pairing mode.
You first have to hold a button inside the case to put the Pixel buds in
pairing mode and from there,
enter the Bluetooth settings on your smartphone and connect them the old fashion way.
To
enter Bluetooth -
pairing mode, press the Xbox button to turn the controller on, and then hold the sync button on the top of the controller for three seconds.4 We had no problems playing over Bluetooth during our testing, but there are some caveats: Your PC needs to be running the Windows 10 Anniversary Update or newer, Microsoft says only one Xbox One controller can be connected via Bluetooth at a time, and the controller's headset jack doesn't work.
Taking the VerveOnes out of the case automatically
enters them into
pairing mode, which I kind of like.
The bottom of the case has a single Lightning port for charging and on the back there's a button to
enter Bluetooth
pairing mode on non-Apple devices.
Once the device
enters into
pairing mode, it will appear under «Other devices», as seen below.
Pressing the two front buttons down for a couple seconds will make a little light on the pen flash and it will
enter Bluetooth
pairing mode.
Once they selected this option they can
enter the Home into
pairing mode and then head over to their phone's Bluetooth settings to add it, just like they would any other speaker.
On pressing the power button (hold for few seconds) the device switches on, you get a voice prompt and the speaker will either connect to already
paired device (smartphone, tablet, etc) or it will
enter into paring
mode.
The Home tab allows you to
pair the watch, set the vibration intensity or
enter Do Not Disturb
mode.
For the first time you will need to tap and hold the smart button to
enter the Bluetooth
pairing mode then start the YU Fit app and follow the steps.