Sentences with phrase «exhaust rocker shafts»

The intake and exhaust rocker shafts contain primary and secondary intake and exhaust rocker arms, respectively.

Not exact matches

Engine block and cylinder heads and all internally lubricated parts including pistons, piston rings, pins and cylinder sleeves; crankshaft, pulley, main bearings, caps and bolts; connecting rods, rod bearings, caps and bolts; camshaft (s), camshaft bearings, buttons and plugs; timing gears and timing chain or belt; rocker arms, rocker arm pivots, shafts and bushings; intake and exhaust valves, springs, guides, adjusters, retainers and seats; pushrods and lifters; intake manifold; exhaust manifolds; balance shaft; water pump; fuel pump; thermostat; oil pump, cover, gears, pressure relief valve and screen; rotor housing, rotors, shims and silent shaft; all internal fasteners, nuts and bolts; turbocharger / supercharger assembly including boost valve and wastegate; seals and gaskets.

It uses a common rocker shaft for both the intake and exhaust rocker arms.

Part Number: 19260835 Engine Type: LS - Series Small - Block V - 8 Displacement (cu in): 454 cu in (7.4 L) Bore x Stroke (in): 4.185 x 4.125 (106.3 x 104.8 mm) Block (P / N 19244057): LSX cast iron with 6 - bolt cylinder head attachment Crankshaft (P / N 19244018): 4340 forged steel Connecting Rods (P / N 19166964): 4340 forged steel Pistons: (P / N 19166958): 4032 forged aluminum Camshaft Type (P / N 19166975): Mechanical roller Camshaft Lift (in):.738 intake /.738 exhaust Camshaft Duration (@.050 in): 250 ° intake / 270 ° exhaust Cylinder Heads (P / N 19166979): Drag race cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: Internal

All Internally Lubricated Parts contained within the Cylinder Block, Head (s), Rotor Housings, Rotor Chamber, including: Eccentric Shaft and Bearings, Pistons, Piston Rings and Pins, Crankshaft and Main Bearings, Camshaft and Bearings, Pushrods, Rocker Arms, Timing Chain (s) / Belt (s) and Gears, Timing Tensioners, Guides, Retainers, Valves, Valve Springs, Seats and Guides, Lifters, Followers, Oil Pump, Mechanical and Electrical Fuel Pumps, Intake and Exhaust Manifolds, Flywheel / Flex Plate, Ring Gear, Harmonic Balancer, Valve Covers, Timing Cover, Oil Pan, Dipstick and Tube, Vacuum Pump, Water Pump, Engine Mounts, Turbocharger / Supercharger Assembly, Waste Gate.

For any engine problems that might occur in your certified pre-owned vehicle, we cover issues such as engine block and cylinder heads and all internally lubricated parts including pistons, piston rings, pins and cylinder sleeves; crankshaft, pulley, main bearings, cap and bolts; connecting rods, rod bearings, caps and bolts; camshaft (s), camshaft bearings, buttons and plugs; timing gears, chain or belt, and tensioner; rocker arms, rocker arm pivots, shafts and bushings; intake and exhaust valves, springs, guides adjusters, retainers and seats; pushrods and lifters; intake manifold; exhaust manifolds; balance shaft; water pump; fuel pump; thermostat; oil pump, cover, gears, pressure relief valve and screen; rotor housing, rotors, shims and silent shaft; all internal fasteners, nuts and bolts; turbocharge / supercharger assembly including boost valve, boost pressure control, wastegate, recirculation and blow off valve; seals and gaskets.

All internal engine parts including pistons, piston rings, piston pins, crankshaft and main bearings, connecting rods and bearings, camshaft and bearings, timing chain / belt, timing gears, intake and exhaust valves, valve springs, valve guides, oil pump, push rods, rocker arms, rocker arm shafts, hydraulic and solid lifters, intake manifold, distributor shaft and housing, harmonic balancer, timing gear cover, and vacuum pump.