Obtained a defense verdict at trial on behalf of a manufacturer of
exhaust system components in a wrongful death action arising from a Grumman AA - 5 aircraft accident
That can allow it to touch hot
exhaust system components and catch fire.
The recall affects 7,028 rear - engined cars that might have an engine insulation mat that could deform, deteriorate and loosen, possibly coming in contact with
exhaust system components that could ignite the mat under extreme heat.
Most jurisdictions that have an annual vehicle inspection program do not allow removal of
exhaust system components.
The engine and
exhaust system components become very hot, and remain hot for some time even after the engine has been shut off.
Perhaps there is a hole in
an exhaust system component which is causing the unusual noise, or the...
Not exact matches
In the mid-1980s, the company teamed up with another, Lean Burn Associates, to add a second
component: a
system which recirculates some
exhaust gases into the air intake, which reduces emissions of oxides of nitrogen.
SVI lengthened the Subie's drive shafts and half shafts, modified the
exhaust system to accommodate the modified suspension
components, and extended the brake lines.
Before handling these
components, wear insulating gloves or wait until the engine and
exhaust system have cooled down.
The 1 - litre, three - cylinder engine has been upgraded with new injection hardware, a cooled
exhaust gas recirculation
system and additional low - friction
components.
Lube oils can enter into the
exhaust system by leaking through worn out piston rings, faulty valve seals, failed gaskets and / or warped engine
components.
Underneath you will find a beautifully detailed undercarriage with all new
components throughout, including suspension, brakes, stainless steel
exhaust system, stainless steel lines, fuel cell, etc, EVERYTHING is brand new!
Other 2015 Mercedes - Benz Coupe performance
components include a full air suspension, a Distronic Plus steering
system, various sensors and radar to promote driver awareness, and a twin - pipe
exhaust system that ensures the full, sporty sound of a luxury performance coupe.
Extensive tuning of
system components enables the 2019 Ram 1500 to maintain its trademark throaty roar from the dual
exhaust tips.
Add the NOVITEC
exhaust system with a perfect fit and powerful sound, either as an individual performance optimizing
components with or without flap regulation.
Powertrain
components include Magnaflow
exhaust, Odyssey batteries, an Amsoil bypass oil filtration
system and more.
Many of the M Performance Parts, including the lowered thread chassis and
exhaust with flap
system, are also available as retrofit
components for the BMW M2 Coupé.
The 4C Spider debuts a new dual - stage central
exhaust system made from titanium with carbon
components.
The
exhaust aftertreatment system to comply with 2010 EPA emissions standards represents a three - stage process; a key component is the use of Diesel Exhaust Fluid (DEF) in a selective catalytic reduction (SCR)
exhaust aftertreatment
system to comply with 2010 EPA emissions standards represents a three - stage process; a key
component is the use of Diesel
Exhaust Fluid (DEF) in a selective catalytic reduction (SCR)
Exhaust Fluid (DEF) in a selective catalytic reduction (SCR)
system.
This version is lighter, as well, due to a seven - speed paddle - shift transmission, lighter
components, and a more compact
exhaust system.
Additional
components that help make the Prius more efficient include an active grille shutter, an
exhaust heat recirculation
system, and a replacement of the previous planetary gear arrangement with parallel gears to help prevent mechanical losses.
-
Exhaust Systems - Brake
Systems - Suspension
Components - Induction
Components - Forced Induction
Systems - Wheel alignment and corner balance
contents: Air Conditioning, Audio / Video, Body, Brakes, Bumpers, Chime / Buzzer,
Component and
System, Cooling, Differential, Driveline, Electronic Control Modules, Emission Control, Engine, Engine
Systems,
Exhaust System, Frame, Fuel
System, Heated
Systems, Heating, Horn, Ignition Control Instrument Cluster, Lamps, Message
Systems, Navigation / Telecommunication, Power
Systems, Quick Reference, Restraints, Security, Speed Control, Steering, Tires / Wheels, Transmission and Transfer Case, TurboCharger, Vehicle, Vehicle Theft, Wipers / Washers, Wiring
Other features include low friction internal
components, improved air intake and
exhaust systems, lighter and smaller parts to reduce weight and improve aerodynamics, and updated software that means the electric drivetrain is used up to 60 per cent more than the
system found in the third generation Prius.
Original MSRP of $ 198,950 Over $ 20,500 in Factory Options Factory Options Include: - Bowers & Wilkins Audio
System - Carbon Fiber Side Intake - Carbon Fiber Interior
Components - Exterior Elite Paint - Vermillion Red - Sports
Exhaust - Stealth
Exhaust Finisher - GT Design 15 Spoke Cast Wheels - Stealth Finish - Carbon Black Leather Steering Wheel - Exterior Door Insert - Exterior Color - Electric Steering Column - Power Adjust Heated Memory Sports Seats - McLaren Braded Floor Mat Set - Extended Leather Interior - Nose Lift - Front and Rear Parking Sensors - Rear View Camera - Soft Close Latches - Cast Iron - Black Calipers - Stealth Badge Set - Tire Pressure Monitoring
System -
Along with the great Lift / Wheel / Tire selections, this Custom Rubicon is loaded with many other quality aftermarket
components such as: *** EXTERIOR *** - Signature Commando Green Exterior Finish - MetalCloak Aluminum Fenders w / outer edge finished in Black - Lifted Off - oad Hood w / Rugged Ridge Hood catches - Lifted Off - road Grille - Fab Fours Front Bumper with Stinger - SmittyBilt X20 10K winch with FairLead - SmittyBilt Recovery Hook - SmittyBilt 3/4 D - Rings w / Daystar Isolators - DV8 Inner Fender Liners - AMP Research Power Side Steps - SmittyBilt Rear Tire Carrier *** LIGHTING *** - ProComp Headlights - Rugged Ridge Smoked Tail Lights - Rigid Industries 2x2 LED Dually Light cubes mounted to the A - Pillar * LIFT and SUSPENSION - TeraFlex 4 Lift Kit - TeraFlex Front Steering Stabilizer -
Exhaust Spacer Kit WHEELS and TIRES - 20 Fuel Beast Wheels - 37/12.5 r20 Nitto Trail Grappler Tires ** INTERIOR *** - Custom Premium Eleganza Heated Leather Seating in Black w / Green contrast stitching - RED LED Rocker Switch - Alpine
System A Alpine 7 ILX - 107 / 207 or INE - W960HDMI Touchscreen Reverse / BackUp camera w / mount IdataLink (3x Lock to start) remote start integration - Starwood Motors All Weather Floor Liners - Starwood Custom Billet Badge - AEV ProCal Module * For all inquiries please contact Starwood motors at 888-464-7174 *
Consequence: If the fuel tank is overfilled and fuel is allowed to enter the fuel tank vent
system, various evaporative emission control
components and / or sensors could be damaged, resulting in poor fuel economy, increased engine
exhaust emissions levels, increased risk of vehicle fire, and the illumination of a service engine soon light.
In a first step, NOVITEC TORADO offers aerodynamic - enhancement
components optimized in the wind tunnel, high - tech forged wheels with matching suspension modifications, high - performance
exhaust systems and exclusive options for the interior.
We are also an importer / exporter of quality aluminum wheels, stainless - steel
exhaust systems, Wheel Mate wheel accessories, Rays wheels, Yokohama wheels, Project Kics wheel accessories and Project Mu Brake
components.
To save weight, the engine uses carbon fiber reinforced polymer (CFRP) for
components like the oil tank and air intake
system, titanium for its connecting rods, a high - strength, lightweight steel for the crankshaft, and a thin - walled alloy steel / nickel
exhaust system.
Some of the vehicle
components that we do testing on include suspension for a comfortable ride,
exhaust system so that you don't have costly repairs, and brake
systems so that you know that the vehicle that you're driving is safe.
All B&B Performance
Exhaust Systems are precision built, completely TIG welded and are a direct replacement for stock exhaust components including all mounting ha
Exhaust Systems are precision built, completely TIG welded and are a direct replacement for stock
exhaust components including all mounting ha
exhaust components including all mounting hardware.
Exhibiting Company: Vortech Engineering Phone: 805-247-0226 Fax: 805-247-0669 E-mail:
[email protected] Website: www.vortechsuperchargers.com Exhibitor Booth Number: 23063 Vehicle Builder: Vortech Engineering Research & Development Powertrain / Drivetrain Type and Modifications: Vortech V - 3 Si supercharging
system, Maxflow air - to - water charge cooler, eight - rib supercharger drive upgrade, competition air inlet and Maxflow FPB fuel pump voltage booster; Borla S - Type
exhaust Chassis Type and Modifications: Forgestar super deep concave F14 wheels; Toyo Proxes T1R tires; KW coil - over suspension; Whiteline A / R bars and braces; Baer six - piston brakes Exterior Modifications: Street Scene body - styling
components Interior Modifications: Scosche dash unit
It installs performance braking, suspension, and steering
components, a unique tuned
exhaust system, and benefits from structural bracing that sharpens handling.
Manufacturer of Autoflex couplings, professional fabrication
components for
exhaust and induction, performance
exhaust systems and other related automotive performance products.
Despite this fundamental difference, the reworked N55 engine adopts the same pistons, crankshaft bearing shells,
exhaust system elements and other as yet unspecified
components as the S55 powerplant.
Manufacturer of high - performance gas and diesel Power
System chips,
exhausts, engine
components and related accessories for late - model GM, Ford and Chrysler vehicles, and EFI tuning products for late - model GM and Harley - Davidson motorcycles.
Pypes Performance
Exhaust — BRONZE Hatfield, PA www.pypesexhaust.com Manufacturer of performance dual exhaust and X-pipe systems, catalytic converters, mufflers, tips, down pipes, headers and exhaust comp
Exhaust — BRONZE Hatfield, PA www.pypesexhaust.com Manufacturer of performance dual
exhaust and X-pipe systems, catalytic converters, mufflers, tips, down pipes, headers and exhaust comp
exhaust and X-pipe
systems, catalytic converters, mufflers, tips, down pipes, headers and
exhaust comp
exhaust components.
The lightweight carbon - fibre aerodynamic
components, optimized wheel / tire combinations, sports
exhaust system and exclusive interior treatment, are underpinned by the performance enhancements.
Aerodynamically, the fortwo Race Edition comes chock - full with new
components, including a modified body kit, a new set of LED daytime running lights, a sports
exhaust system, an in - house sports suspension that drops the car's height by 15 mm (0.59 inches) on the front and 30 mm (1.18 inches) on the rear.
A custom mandrel - bent
exhaust system featuring Corsa
components increases performance.
Performance * Pedders sport springs and suspension
components * Brembo brake kit * Borla high - flow
exhaust system * K&N cold - air intake
system
The car also has a trunk - mounted spoiler, a rear diffuser and a four - tailpipe
exhaust system, torque vectoring
system as well as a number of aluminum
components.
• 1932 Brookville Steel RPU body and custom fabricated box • Custom removable top for weather protection • From Ford Racing, the all - new 5.0 - liter Ti - VCT «Coyote» V - 8 engine from the upcoming 2011 Ford Mustang — deconstructed and re-dressed with vintage accessories to resemble the iconic 1963 Ford 427ci SOHC race motor • Custom vintage - style stack fuel injection setup from Hilborn — operated by a modern engine management
system for modern reliability • Tremec 5 - speed manual gearbox • Aluminum quick - change rear axle • Complete Raybestos Brakes package • Bias ply Firestone Indy roadster period correct tires at all four corners from Coker Tire • Custom gauge cluster by Redline Gauge Works • Custom shifter, linkage, pedals and assembly by Gennie Manufacturing • «Lakes» style headers will be handmade by Hollywood Hot Rods with oval cones fabricated from polished stainless steel
components provided by Megs
Exhaust Builders Warehouse • WIX oil and fuel filters • Traditional style tuck and roll interior • Powder coating, metal coating, and media blasting work by Pacific Coast Powder Coating
A number of changes have been made to help reduce emissions, such as: use of a complex
exhaust gas recirculation
system (with high pressure EGR and a cooled low - pressure EGR); integration of the water - cooled intercooler and the EGR valve with the intake manifold, which also improves throttle response; and packaging the
exhaust after - treatment
components close to the engine by combining the DPF with the SCR Catalyst.
Components such as the
exhaust system and engine undergo complete and accurate testing.
The boost in power comes from a new direct and port fuel injection
system, lighter crank assembly
components, a redesigned twin - turbocharger
system with an electronic wastegate and an increased boost calibration, stainless steel manifolds, a full dual
exhaust system, oil - cooled pistons, a reworked valvetrain
system, and a more aggressive ECU tune.
Many of the M Performance Parts — including the lower - lying coilover suspension and the
exhaust system with flaps — are available as retro - fit
components for the BMW M5 Sedan.
The aero
components are available for the sedan and wagon variants of the recently facelifted A4, consisting of a new front and rear spoiler, side and rear skirts, fender inserts, and a quad
exhaust system.
With the addition of an electric gas recirculation valve with a cooling bypass and the application of the EOBD (European On Board Diagnosis)
system, which controls the
components involved in
exhaust emissions, this is one of the cleanest, most economical diesel engines around.