Sentences with phrase «feet sheets of plywood»

Like the rest of the trucks in this class, you can't fit a 4 × 8 sheet of plywood between the wheel wells, but with a few 2x6s cut to length and stuck in the pockets in the inner bed, you can fit a four - foot sheet of plywood over the wheel wells, as long as you don't mind it hanging out of the open tailgate.

Fold the second - and third - row seats down, and you can carry 4x8 - foot sheets of plywood.

That means there's room for up to eight passengers and that, like all Chrysler minivans since the»80s, the Pacifica will be able to carry an 8 × 4 - foot sheet of plywood out back.

The rustic mirror looks great against the planked wall, which can be made inexpensively by cutting 4 - x 8 - foot sheets of plywood into 6 - inch - wide strips.

Not exact matches

There are 120 4 - foot - by -8-foot dasher boards and wind walls made with 240 sheets of plywood and 600 2 - by -6-by-8 pieces of wood.

Chevrolet Accessories will also offer storage boxes that mount in this additional space over the wheel wells, similar to Nissan's Titan Boxes, which will provide nearly seven cubic feet of storage while still allowing a full sheet of plywood to fit in the bed.

Because of the Pilot's wide stance, there's sufficient clearance between the wheelwells to place 4 - foot - wide items, such as sheets of plywood, flat on the floor.

And, big - item storage is great too — fold down the second - and third - row seats, and the Pacifica boasts 140.5 cubic feet of cargo volume and enough open floor space to haul a 4 × 8 sheet of plywood.

The cargo bed is five feet four inches long and five feet wide; a four - foot - wide sheet of plywood will fit between the wheel arches.

When the Midgate is open and the rear seat is folded flat, Avalanche can carry 4 - foot by 8 - foot (1.2 m by 2.4 m) sheets of plywood with the tailgate closed.

With the seats folded down, it can haul 4 - foot - by -8-foot sheets of plywood.

Preparing his signature surface involves bolting a standard four - foot - square sheet of plywood to wooden stretchers, onto which he glues 12 - inch - square vinyl floor tiles and applies butyl rubber (commonly used in roofing) to the surface.

Once the mix is soft enough, it's placed in a hydraulic press where it is flattened into panels approximately 8 feet long, 4 feet wide and 1 inch thick — about the size of a standard sheet of plywood.