Not exact matches
A similar case to EuropaCorp's «Kursk,» the true story of a Russian submarine that sank in the Barents Sea in 2000 and killed everyone
on board; though Putin had a significant role in the events, appears in the source
material of Robert Moore's best - seller «A Time to Die,» and even featured in early versions of the screenplay, he's nowhere to be found in the finished
film.
Serious
Materials has also pumped dollars into improving technology that layers glass, coated
film, and inert gas to make windows more energy efficient than almost anything else
on the market.
A representative for Bigelow told Business Insider that the
film was made independently and relied
on a variety of source
materials.
«Our success is primarily dependent
on audience acceptance of our
films, which is extremely difficult to predict and, therefore, inherently risky... Our business is currently substantially dependent upon the success of a limited number of
film releases each year and the unexpected delay or commercial failure of any one of them could have a
material adverse effect
on our financial results and cash flows.»
Until the axe came down, I'm told British action game studio Ninja Theory had been working
on material based
on December's Rogue One: A Star Wars Story, while Studio Gobo, a studio largely known for external Disney Infinity development, riffed
on the upcoming Disney animated
film Moana.
Other key trends include the growing use of sustainable packaging based
on biodegradable polymers, bio-derived
materials and recycled plastics, and down gauging
films for cost reduction.»
Over the past 50 years, Glenroy's flexible packaging
film laminations have run
on many different types of equipment, and we'll gladly work with you to ensure that your
material runs well
on your filling equipment of choice.
Highlights from MediSeal will include the White - Line packaging and logistics concept, which instead of a country specific packaging
materials and pack inserts is based
on «white» (blank or unprinted)
materials, where lidding
films, boxes and inserts are not printed with the country specific information until they are in the packaging line and inspection and camera systems provide a 100 % check, guaranteeing pharmaceutical safety.
Last October, being a market leader in packaging solutions for fresh produce, R.O.P was invited to lecture at Multilayer Packaging
films 2014 — the International conference
on advances in flexible packaging technology,
materials, and markets that was held Cologne, Germany.
From cardboard, to stretch
film, to glass, we do our best to recycle as many
materials we can
on a daily basis.
Because of its small footprint, it's easy to mount at a variety of angles when printing and coding
on paperboard
materials, plastics, bags, pouches and
films, labels or aluminum.
Based
on a novel by P. D. James, the
film is considerably more radical than the source
material.
Channel your inner director in this hands -
on, tech - based workshop series for teens at Hamilton Grange Library
on Mon., Aug. 10th at 1 p.m. Using an iPad, participants will bring clay, pipe cleaners, and other craft
materials to life, creating a stop - motion video akin to the
films Coraline or The Boxtrolls.
The focus of this investigation is a hybrid
material consisting of a thin nickel
film on a vanadium oxide substrate; this hybrid
material exhibits magnetic properties unlike any other magnetic
material.
Simply put, by employing less expensive semiconducting
material thin -
film solar cells would be cheaper to make, a fact born out by thin -
film solar manufacturer First Solar's world - beating module that costs 73 cents per watt in 2011, albeit before the expense of installing it
on the roof.
«We found that a very simple process and a tiny bit of gold can turn a transparent
film black,» said UC Irvine chemistry professor Robert Corn, whose group has created a patterned polymer
material based
on the findings, documented in recent papers.
A HEATED RESPONSE Probing 2 - D
materials with high - energy particle beams reveals how these superthin
films perform when the heat is
on.
Leaving the
material in a sealed container for a few days «nicely produced a cellulose
film on top of the printed structure,» says study coauthor Patrick Rühs, a food scientist also at ETH Zurich.
Thin
films are coated with molecule - thin layers of
materials like zinc, silicon, nitrogen, and so
on.
Making thin
films out of semiconducting
materials is analogous to how ice grows
on a windowpane: When the conditions are just right, the semiconductor grows in flat crystals that slowly fuse together, eventually forming a continuous
film.
On top of it they placed a metal electrode coated with a 10 - to 50 - nanometer - thick
film of an insulating
material.
All the single - stranded
material got separated out
on top of a filter, but only the hot Borna brain
material appears
on film.
The fact that thin
films made of low cost metal - organic perovskites can be produced
on a large scale for example by spin coating and subsequently baking (whereby the solvent evaporates and the
material crystallizes), makes this technology additionally attractive.
«V» children should be taught using pictures,
film and signs; «R» children using traditional written
materials, and so
on.
Currently, in most production processes in which there is printed ink
on plastic
films, the
material is rejected for not complying with the final specifications required or simply because they come from the initial settings for the commissioning of the machinery.
Already, the new
material, when combined with a mirrorlike silver
film, has been shown to cool whatever it sits
on by as much as 10 °C.
The process also allows the ceramics to be laid down as a thick
film on other
material.
In a study published in the inaugural issue of the journal Applied
Materials Today, a new rapid, online only publication, the team of researchers describe how they make these
films which are based
on the heavy metals lanthanum and europium.
In their study, the scientists from MIPT succeeded in growing an ultra-thin, tunnel - transparent
film of this
material on a silicon substrate, while maintaining the ferroelectric properties.
Until now, thin -
film solar cells have been made in vacuum chambers — the semiconductor
materials are placed
on the glass or metal and then air is pumped out of the chamber, creating pressure that fuses the
materials.
Previous work reducing defects in thin -
film perovskite
materials has focused
on electrical or chemical treatments, but «we find we can do the same with light,» Stranks says.
But in practice, the performance of different batches of these
materials, or even different spots
on the same
film, has been highly variable and unpredictable.
The newly - developed perovskite solar cell device was fabricated using solution processes, a process that involves the coating perovskite
materials on a flexible
film.
Using ultrafast 4 - D imaging, the new UEC technique allows researchers to «
film» the atomic mechanism behind the recording process in memories based
on phase change
materials.
They showed that the lithium ions form a thin
film on the surface of the graphene oxide and then diffuse through defect sites — essentially gaps in the layers of the
material — before settling below the bottom layer of the graphene oxide.
But though the Uhlirs» electropolishing method worked well most of the time, their samples were sometimes ruined by a thick black, red or brown
film which appeared
on the surface of the
material.
Reynolds envisions electrochromic
films on various
materials, including some other than glass or plastic.
Some have suggested that GO would make a great
material to be deposited
on additional substrates for thin conductive
films where the surface could be tuned for use in optical data storage, sensors, or even biomedical applications.
We created a thin -
film device that operates
on the same principle but with two types of solid redox
materials that produce a change in the potential difference in the cell over a heating and cooling cycle,» firstauthor Takayuki?Shibata says.
Atomic layer deposition is a layer - by - layer chemical vapor deposition - based thin -
film growth technique used extensively in the electronics industry to deposit nanometer - thick
films of dielectric
materials on devices.
However, the preparation of LIPSS either
on semicrystalline polymer
materials or in free standing polymer
films is still challenging.
Abstract: Scientists at the U.S. Naval Research Laboratory (NRL) have devised a clever combination of
materials — when used during the thin -
film growth process — to reveal that particle atomic layer deposition, or p - ALD, deposits a uniform nanometer - thick shell
on core particles regardless of core size, a discovery having significant impacts for many applications since most large scale powder production techniques form powder batches that are made up of a range of particles sizes.
A group of NUST MISIS's young scientists has presented a new therapeutic
material based
on nanofibers made of polycaprolactone modified with a thin -
film antibacterial composition and plasma components of human blood.
Researchers at Argonne National Laboratory have identified a new
material to catalyze the conversion of CO2 via hydrogenation to methanol (CH3OH): size - selected Cu4 clusters — clusters of four copper atoms each, called tetramers — supported
on Al2O3 thin
films.
He has focused
on the controlled
film growth and properties of model
materials and heterostructures throughout his career.
These
films allowed for experiments that were far too difficult to carry out
on single or tangled aggregates of nanotubes and caught the attention of Tokyo Metropolitan physicist Kazuhiro Yanagi, who studies condensed matter physics in nano
materials.
University of Tsukuba - based researchers developed a way to recover environmental heat with a new type of thin -
film thermoelectric cell, based
on two different
materials that show changes in their redox potential
on cycling of temperature.
Furthermore, it was shown that the temperature dependence of the voltage generation efficiency additionally depends strongly
on the atomic structure of the interface between magnetic
material and metal thin
film.
I spent some time in Croatia
filming videos, beauty and fashion related, and in these days I'm working
on editing all the
material.
While I was overwhelmingly negative
on the year's biggest
film to date, Transformers: Dark of the Moon, I recognized that the top - shelf effects and the 3D were perfect for the
material.