Apply one layer of a nail
base coat (such
as OPI Start - to -
Finish, $ 9.95), then brush on two
coats of a soft or sheer pink polish.
I used Sally Hansen's Blazing Blue
as the
base, Digital Nails «s Winter is Coming for the glitter accents, and one
coat of Seche Vite to
finish it off.
If one of Zircotec's colours has been chosen
as the
finish, rather than simply white, it's then applied after the
base ceramic
coating.
1
As work progresses on the foundations, a plate compactor is used to ensure a solid, stable base for the concrete slab; 2 pouring the concrete slab; 3 a cross-section of the wall build - up showing wet dash finish followed inside by external insulation, 215 mm solid block walls, sand - cement plaster and insulated plasterboard internally; 4 airtightness detailing around joist ends; 5 pro clima Intello airtightness system under counter battens to create a service void while minimising airtight layer damage by service penetrations; 6 a parge coat serves as the airtight layer on the inner face of the single leaf block wall
As work progresses on the foundations, a plate compactor is used to ensure a solid, stable
base for the concrete slab; 2 pouring the concrete slab; 3 a cross-section of the wall build - up showing wet dash
finish followed inside by external insulation, 215 mm solid block walls, sand - cement plaster and insulated plasterboard internally; 4 airtightness detailing around joist ends; 5 pro clima Intello airtightness system under counter battens to create a service void while minimising airtight layer damage by service penetrations; 6 a parge
coat serves
as the airtight layer on the inner face of the single leaf block wall
as the airtight layer on the inner face of the single leaf block walls.