Sentences with phrase «finish cylinder bores»

Rated at 188 horsepower at 5,600 RPM and 177 lb - ft of torque at 1,600 - 5,200 RPM, the 16 - valve DOHC aluminum - alloy inline 4 - cylinder engine includes a 10.5:1 compression ratio, Continuously Variable Valve Timing Control System (CVTCS), spray - coated and mirror - finish cylinder bores, a variable pressure oil pump and a low - pressure EGR system, which helps lower exhaust gas temperature and improve knock sensitivity.

The Continuously Variable Valve Timing Control System (CVTCS) includes an intermediate lock function on the intake side, while the use of spray - coated and mirror - finish cylinder bores (versus the iron liners) provides an estimated 12 percent reduction in internal friction, which also improves anti-knock performance and reduces engine weight.

There's also 12 % less internal friction thanks to spray - coated and mirror - finish cylinder bores, limiting knock and engine weight vs. the previous iron liners, Nissan says.

Not exact matches

• CNC - machined cast - iron competition block • + / -0.001» machining tolerances • 4 - bolt nodular mains, splayed caps on center 3 mains • 3.980» finished bore • 4.155» max bore (siamese cylinder bores) • Extra smooth gasket surfaces for better seal • Tall lifter bores • Comes with rear seal adapter

For example, cast iron cylinder liners are inserted in the aluminum block and are finish - bored and honed with a deck plate installed.

Cast iron cylinder liners — measuring 4.06 inches (103.25 mm) in bore diameter — are inserted in the aluminum block and they are finish - bored and honed with a deck plate installed.

Stainless Steel Brakes offers its forged aluminum master cylinders in 144 different varieties of tops, finish, and bore diameters (1» and 1 1/8»).