The first coat of paint was mixed with water and then applied with a brush.
After
the first coat of paint is dry you can continue to apply coats of paint with a small roller until it is completely covered.
The image below is after
the first coat of paint.
The first coat of paint was a light layer, and I allowed it to dry before working on the second coat.
Once all the damage was sanded I applied
the first coat of paint....
Just apply your primer right over
the first coat of paint.
I typically only sand if the surface is rough and scratched up - and after
the first coat of paint I'll lightly sand to smooth out any bumps since I can be a sloppy painter.
Before applying the next coat, lightly sand
the first coat of paint using a sanding block.
After
the first coat of paint dried, I used a pencil to trace the outline of the state onto the canvas.
was feeling lazy), I used Fusion for
the first coat of paint instead.
Bathroom «vanity» is currently undergoing
its first coat of paint now:)
The first coat of paint, you need to spray it lightly.
The first coat of paint had a large effect, but each successive coat has a smaller and smaller effect.
The current level of CO2 is similar to
the first coat of paint.
The first coat of paint blocks out a lot of light, but the window is still translucent.
In my market, you can't charge for
the first coat of paint if they've been there more than 18 months.
With some brushstrokes of paint here and some rolling there, you finish your room's
first coat of paint.
Finally, we almost have
the first coat of paint on the built - ins, too.
That day finally came last week when we got
the first coat of paint up!
Hi, did you sand your tables first before applying
the first coat of paint itself?
The first coat of paint always leaves a piece in the ugly duckling stage.
Once primed I actually took another precaution by painting
my first coat of paint in very light gray, using Tahoe by Kristi Kuehl Pure Home Paint.
I like
the first coat of paint.
I don't think my husband will ever agree to paint rooms with me again after I fizzled out halfway through
the first coat of painting our bedroom a deep cocoa.
I'll even go so far as to say that I love applying
the first coat of paint.
While applying
the first coat of paint, the paint wouldn't stick at all in many places and you couldn't tell I had degreased or painted the metal.
When I put on
the first coat of paint, the color felt a little purple in the undertones, but once it dried, I loved it.
Tomorrow, all of the wainscoting will get it's
first coat of paint.
This is after
the first coat of paint, with equal parts Extra Bond added in, normally on raw wood you don't need a bonding agent, but as a precaution I really wanted to make double sure the top and drawers were not going to chip on me, in case I had issues with that red stain and....
While
the first coat of paint dried, he painted the sides and the shelves.
Apply
the first coat of paint onto the lamp.
The first coat of paint was mixed with water and then applied with a brush.
We used Kilz 2 and did two or three coats of primer, sanding lightly with 400 grit before
the first coat of paint.
You just apply a thin layer directly on top of
your first coat of paint and let it dry for about 30 minutes.
The first coat of paint dried in under an hour and I applied a second coat.
The intent was to streak, not to cover
the first coat of paint, and was completely accomplished by manipulating the brush.
Allow science to do its thing and for
the first coat of paint to have 24 hours.
Phrases with «first coat of paint»