Plastic Logic may make fully
flexible devices in the future, says Sirringhaus.
Not exact matches
Best of all, it comes with built -
in Bluetooth and Wi - Fi to make it a truly
flexible wireless
device.
The cable type that's long powered Android phones (among many other
devices) has slowly but surely given way to the newer, more
flexible USB - C standard
in recent months.
Dr Eric Topol talks with pioneering researcher John Rogers about how his
flexible electronic
devices are being used
in medicine and what further developments lie ahead.
Printpack is a major converter of
flexible and specialty rigid packaging for the world's biggest brand owners
in the food and beverage industry as well as the household, lawn and garden, personal care, pet foods, tobacco, towel and tissue, and medical
device markets.
This will include Dr James Stern from Albis discussing plastics
in healthcare applications, Professor Alexander Seifalian of The London BioScience Innovation Centre covering the development of medical
devices using graphene nanomaterials and Lorna O'Gara from Ultrapolymers explaining polymer innovation
in healthcare and inter-material replacement for
flexible applications.
European leader
in the design and production of
flexible bags and medical
devices, Technoflex assists the largest pharmaceutical companies for over 40 years.
Formed
in 1994 as a council of the
Flexible Packaging Association, the Sterilization Packaging Manufacturers Council (SPMC) specializes
in packaging for the medical
device industry and is comprised of members of the
Flexible Packaging Association.
The technique could also be used to clean surfaces without harsh solvents, and could be adapted to peel films used
in ultrathin electronic
devices, such as solar panels,
flexible screens or wearable sensors.
In a four - hour operation at the University of Florida Veterinary Medical Teaching Hospital, the surgeons replaced part of the ankle joint with a flexible plastic device about the size of a clothespin, normally used as an artificial joint in the big toes of human
In a four - hour operation at the University of Florida Veterinary Medical Teaching Hospital, the surgeons replaced part of the ankle joint with a
flexible plastic
device about the size of a clothespin, normally used as an artificial joint
in the big toes of human
in the big toes of humans.
In 2008, at a materials science conference in Boston, Dagdeviren approached John Rogers, whom she describes as a «king of flexible devices.&raqu
In 2008, at a materials science conference
in Boston, Dagdeviren approached John Rogers, whom she describes as a «king of flexible devices.&raqu
in Boston, Dagdeviren approached John Rogers, whom she describes as a «king of
flexible devices.»
In addition to being light and
flexible, it can extract electrical energy from human blood and sweat, making the
device potentially usable as a power source for tiny medical
devices inside the human body.
The thin profile and minimal energy requirements of
devices could also make it useful
in flexible displays or as a security measure on credit cards.
Such soft,
flexible battery - like
devices, described online December 13
in Nature, could power soft robots or next - gen wearable and implantable tech.
This superthin, 2 - D material — incredibly strong,
flexible and light — could have diverse applications
in areas that include biomedical
devices and consumer tech.
Because the new, smaller,
devices are
flexible and can be held
in place with sutures, they also may have potential uses
in or around the bladder, stomach, intestines, heart or other organs, according to co-principal investigator John A. Rogers, PhD, professor of materials science and engineering at the University of Illinois.
Folding up a single sheet of graphene according to the principles of the Japanese art of origami could result
in tiny
devices like nano - robots and
flexible circuits
Furthermore, as the TUM researchers report
in their latest papers, such
devices can be fabricated on
flexible backing materials through large - area, low - cost processes.
It could also create a new area of soft robotics, and enable new applications
in flexible sensors and actuators, biomedical
devices and platforms or scaffolds for cells to grow, Lee said.
In addition, the
flexible piezoelectric nanogenerator could also be utilized as an electrical source for various implantable medical
devices.»
In particular, flexible magnetic memory devices have attracted a lot of attention as they are the fundamental component required for data storage and processing in wearable electronics and biomedical devices, which require various functions such as wireless communication, information storage and code processin
In particular,
flexible magnetic memory
devices have attracted a lot of attention as they are the fundamental component required for data storage and processing
in wearable electronics and biomedical devices, which require various functions such as wireless communication, information storage and code processin
in wearable electronics and biomedical
devices, which require various functions such as wireless communication, information storage and code processing.
They also put the aerogel
in a circuit with an LED and found it could potentially work as a component of a
flexible device.
Flexible tuning of bandgap is extremely desirable
in semiconductor - based
devices.»
Researchers
in the Department of Chemical Engineering at the Technion — Israel Institute of Technology
in Haifa (Israel), who were inspired by the healing properties
in human skin, have developed materials that can be integrated into
flexible devices to «heal» incidental scratches or damaging cuts that might compromise
device functionality.
«We already know how to put electronics on the skin
in a natural manner — here our challenge was dealing with fluid flow and the collection, storage and analysis of sweat
in a thin, soft and
flexible device,» said Huang, who worked on the
device's design and optimization.
The PTMA is
in a class of electrically active polymers that could bring inexpensive transparent solar cells; antistatic and antiglare coatings for cellphone displays; antistatic coverings for aircraft to protect against lightning strikes;
flexible flash drives; and thermoelectric
devices, which generate electricity from heat.
Previously developed
in Rogers» Northwestern Engineering laboratory, the soft,
flexible device sits on the skin and measures sweat to determine how the body responds to exercise.
«Because they remain
flexible and structurally consistent over their length, the fibers can also be woven into a crossing pattern into clothing for wearable
devices in smart textiles.»
«So we could use it
in the future by taking traditional speakers, which are big, bulky and use a lot of power, and replacing them with this very
flexible, thin, small
device.»
A paper - thin,
flexible device created at Michigan State University not only can generate energy from human motion, it can act as a loudspeaker and microphone as well, nanotechnology researchers report
in the May 16 edition of Nature Communications.
A
flexible silicon mount kept the
device in place, while a wire transmitted data to a computer.
«The ability to suture a thread - based diagnostic
device intimately
in a tissue or organ environment
in three dimensions adds a unique feature that is not available with other
flexible diagnostic platforms,» said Sameer Sonkusale, Ph.D., corresponding author on the paper and director of the interdisciplinary Nano Lab
in the Department of Electrical and Computer Engineering at Tufts University's School of Engineering.
The bendable base layers make
devices twist and stretch when attached to the skin, but they are limited by a lack of key components such as batteries and processors that currently do not exist
in flexible form.
Mixing and matching materials this way may pave the way to brighter displays for cell phones and handheld games, spherical light - sensitive «eyes» that take
in a wide field of view, and
flexible communications
devices that can be folded and stuffed into a backpack, says materials scientist John Rogers of the University of Illinois at Urbana - Champaign.
Despite their benefits for wearable
devices,
flexible electronics including Kim's remain cumbersome to manufacture and are currently built by hand one by one
in university labs.
These contributions «represent a significant step forward
in structure - function relationships
in organic semiconductors, critical for the development of the next generation of
flexible electronic
devices,» the authors point out.
In our May 2014 issue, Sridhar Kota, a professor of engineering at the University of Michigan and founder and president of the company FlexSys, published an article about his long - running campaign to take complex, multipart machines and redesign them as
flexible, one - piece
devices (subscription required).
According to the authors on the paper «
Flexible Ionic Devices for Low - Frequency Mechanical Energy Harvesting» published online
in the journal Advanced Energy Materials, «The peak power density of our
device is
in general larger than or comparable to those of piezoelectric generators operated at their most efficient frequencies.»
The TFT, which has been presented today, 13 February,
in IOP Publishing's journal Nanotechnology, is the latest
device to be fabricated on paper, making the electronics more
flexible, cheaper to produce and environmentally friendly.
For the millions of people every year who have or need medical
devices implanted, a new advancement
in 3D printing technology developed at the University of Florida promises significantly quicker implantation of
devices that are stronger, less expensive, more
flexible and more comfortable than anything currently available.
The
flexible devices show potential for use
in wearable and next - generation electronics.
Insights from the study could inspire advances
in robotics, defense systems, or biomedicine, the authors say, teaching engineers how to build
devices that are both
flexible and strong.
The findings, which have been reported
in Nature Communications, reveal that the h - BN layers form the strongest thin insulator available globally and the unique qualities of the material could be used to create
flexible and almost unbreakable smart
devices, as well as scratch - proof paint for cars.
«New way to move atomically thin semiconductors for use
in flexible devices.»
In work led by professor Yanliang Zhang at Boise State University, high - performance and low - cost
flexible thermoelectric films and
devices were fabricated by an innovative screen - printing process that allows for direct conversion of nanocrystals into
flexible thermoelectric
devices.
Bao and her colleagues did, however, demonstrate the
flexible potential of their microstructured elastic layer
in a simpler
device.
For example, by removing some of the oxygen from graphene oxide, the electrically insulating material can be rendered conductive, opening up prospects for use
in flexible electronics, sensors, solar cells and biomedical
devices.
Published today
in the journal 2D Materials, the study from Tsinghua University
in Beijing, employed
flexible electronics made from graphene,
in the form of a highly - sensitive resistive strain sensor, combined with a stretchable organic electrochromic
device.
«The materials are so thin and
flexible that the
device can be made transparent and can conform to curved surfaces,» said Der - Hsien Lien, a postdoctoral fellow at UC Berkeley and a co-first author along with Matin Amani and Sujay Desai, both doctoral students
in the Department of Electrical Engineering and Computer Sciences at Berkeley.
Biomechanical stretch and strain can be mimicked
in this
device by rhythmic contractions of the
flexible membrane.