That will work fine to move the flywheel / flexplate to get it started, but it's easier to turn it at the flywheel /
flexplate with screwdriver / pry bar when you are removing the bolts.
Not exact matches
Low battery voltage under load (cranking) will produce enough amperage to energise the starter solenoid and pull in the pinion to mesh
with the flywheel (or
flexplate ring gear).
• Comes
with an externally balanced 14» automatic transmission
flexplate.
• Use neutral balance harmonic damper P / N 12551537 • Use internally balanced
flexplate P / N 471529 for automatic transmission or flywheel P / N 14085720 for manual transmission (not included) • Power ratings based on tests
with Holley 670 - cfm carburetor P / N 19170092 (not included) • Does not accept Chevrolet Performance roller lifter assemblies • Designed for pre-1976 street vehicles or any off - road vehicle • Not intended for marine applications • See the Valve Covers section on page 186 for selection of chrome, polished and aluminum valve covers • Pre-1986-style 2 - pc rear main seal block • Recommended for use in vehicles
with 6,000 GVW or less Chevrolet Performance recommends Holley 670 - cfm carbureto P / N 19170092 for use
with the 350/290 HP Deluxe.
It also includes the EFI intake manifold assembly
with injectors and throttle body, exhaust manifolds, water pump, balancer, 58X reluctor wheel and 14 - inch automatic - transmission
flexplate.