Sentences with phrase «formed sheet steel»

The crankcase, for example, is made of aluminium, with magnesium used for the intake manifold while the exhaust manifold is made of laser - welded, high - pressure formed sheet steel.

Not exact matches

When it's finished, an engineer will be able to walk right over to the manufacturing floor and see a rocket engine milled from a piece of stainless steel or a fuel tank formed from giant sheets of aluminum.

Formed from a single sheet of stainless steel, these belly combs are durable enough for the most demanding use.

Cold - formed steel pieces, commonly used to frame low - and mid-rise buildings, are made by bending sheet metal, roughly one - millimeter - thick, into structural shapes without using heat.

Nanocomp says it can produce nanotubes that are tens to hundreds of times as long, forming carbon yarns and sheets (yarns up to one kilometer in length, with a tensile strength better than steel, and sheets made in 18 - square - foot sections).

This is sheet steel hand - formed on big metal - bending machines and pounded into shape with hand - held hammers.

The roof and the exterior door panels are formed in sheet steel, while the remainder of the outer skin is made from carbon composite material.

This technology is used to join the aluminum side wall frame to the hot - formed steel sheets at the B - pillar, roof line and sills.

All needed supplies, including but not limited to price sheets, Authorization Forms, cadaver bags, steel ID tags and zip - ties

The canopy itself is composed of layered, multicolored sheets of grated steel, the amorphous forms of leaved branches punctuated by geometric lines and grids.

Alongside those works, Serra designed a series of forged pieces including: «Two Forged Rounds for Buster Keaton», «Snake Eyes and Boxcars» and «Ali - Frazier» and «Charlie Brown» One of his biggest installation is «The Matter of Time» commissioned by the Museo Guggenheim Bilbao, it incorporates a series of seven sculptures made of spot - welded sheets of steel that form 4,3 m high curling walls positioned around the existing sculpture, «Snake», that had been commissioned for the museum's opening in 1997.

Deacon describes himself as a «fabricator», emphasising the construction behind the finished object — although many of the works are indeed cast, modelled or carved by hand — and accordingly the logic of the fabrication is often exposed: sinuous curved forms might be bound by glue oozing between layers of wood or have screws and rivets protruding from sheets of steel, wearing their hearts on their sleeves.

For the 1964 World's fair, he welded the colossal Forms in Transit — a rocket - shaped, forty - three - foot sculpture comprised of aluminum, steel, and sheet metal — and in 1968, his twenty - five - foot bronze Sentinel was installed at the Public Health Laboratories on East 27th Street, New York.

For the 1964 World's fair, Roszak welded his colossal Forms in Transit — a rocket - shaped, forty - three - foot sculpture comprised of aluminum, steel, and sheet metal — and in 1968, his twenty - five - foot bronze Sentinel was installed at the Public Health Laboratories on East 27th Street, New York.

Scottish Mansion Time, 2015, printed image, plywood, wood, metal sheeting, victorian painting, lampshade, industrial lamp, deck chair, boxes, hammock, netting, hook, velvet, check fabric, wooden technical parts, mirrored card, mini whiskey bottles various whiskeys, paper, wooden forms, Magic Latern, chair, wooden elephant, metal rod, wood dye, varnish, large table with steel legs, 240V light fixtures and bulbs, LED strip warm white, fixings, 243 x 275 x 275 cm, 95 5/8 x 108 1/4 x 108 1/4 ins

Unlike the expansively curved sheets of steel that Serra has used for various immersive site - specific installations, the simple forms of his forged sculptures can be comfortably circumambulated or visually understood at a glance.

Titled «Model», at White Cube Bermondsey consists of an ambitious construction containing 100 tons of sheet steel forming an architectural installation which challenges the physical possibilities of the gallery space and investigates our experience of architecture through the body and of the body through.

The two locations are showcasing thematically different works, North Orange Grove gallery consisting of hand - painted bronze sculptures depicting the human form, while the works at Santa Monica Boulevard are far more abstract and are composed of sheets of solid steel that Warren systematically welded together.

One of 12 steel sheets that form «Sequence,» off loaded from a truck and ready to be moved into place at SFMOMA.

But the steel with which Cut / Drawn begins is already given a particular form: an industrially rolled sheet.

It begins with a light - gauge steel frame, which can even be site - fabricated using a roll - forming machine that produces structural forms from a continuous roll of thin sheet steel.

The architecturally inspired form is made from folded sheet steel that will support a bike securely by its top tube and can be mounted easily to any solid wall.

Extensively trained in safe manufacturing practices, along with extensive knowledge with forming sheet metal, running lathes and mills both CNC and conventional as well as TIG welding stainless steel, aluminum and carbon steel.