Sentences with phrase «framing load bearing»

A appraiser determines the value of a property, and has very little knowledge of compression webs, stick built rafter & ridge framing load bearing points.Is the roof meet wind standard attachment etc...

Not exact matches

And where did Noah find enough trees for 216,525 square feet of wood fort the frame, plus load - bearing walls, interior rooms, stalls, pens, and staircases.

A) Enough trees for 216,525 square feet of wood fort the frame, plus load - bearing walls, interior rooms, stalls, pens, and staircases.

Clip - on seats attach to your dining table and thanks to their strong frame and smart design can bear the load of your child's weight safely.

The nearly 4,000 cubic inches of space gives you all the room you need for a long hunting trip, and the load - bearing frame helps you to carry it all with ease.

Other successful programs have included additional elements such as: reduced course loads; providing a teacher's aide; 42 observations by former teachers and administrators; and even a crisis line that teachers can call to get a response within a certain time frame from experienced teachers.43 Overall, the goal is to provide beginning teachers with significant personalized support as they find their bearings in the classroom.

GENERAL Vehicle / model: ’17 Jeep Grand Cherokee Trailhawk 4x4 Base price: $ 43,095 Price as tested: $ 53,515 Options as tested: Customer Preferred Package 28J ($ 2,695), Jeep Active Safety Group ($ 1,495), 5.7 L Hemi V - 8 ($ 3,295), Rock Rails ($ 895), Uconnect 8.4 NAV ($ 450), Blind Spot and Cross Path Detection ($ 595), Destination Charge ($ 995) ENGINE Type: Chrysler 16 - valve V - 8 Displacement (ci / liter): 345/5.7 Bore x stroke (in): 3.92 x3.58 Compression ratio -LRB-: 1): 10.5 Intake / FI: Naturally aspirated, sequential multi-port electronic Mfg.'s power rating @ rpm (hp): 360 @ 5,150 Mfg.'s torque rating @ rpm (lb - ft): 390 @ 4,250 Mfg.'s suggested fuel type: Midrange unleaded recommended; regular unleaded acceptable DRIVETRAIN Transmission: ZF 845RE 8 - spd automatic Ratios -LRB-: 1): First 4.71 Second 3.14 Third 2.11 Fourth 1.67 Fifth 1.29 Sixth 1.00 Seventh 0.84 Eighth 0.67 Reverse 3.30 Axle ratio -LRB-: 1): 3.09 Transfer case: MP 3022 2 - spd Low - range ratio -LRB-: 1): 2.72 Crawl ratio -LRB-: 1): 39.6 FRAME / BODY Frame: Steel unibody Body: Steel SUSPENSION / AXLES Front: Short - and long - arm independent, coil springs, twin - tube coilover shocks, steel upper - and aluminum lower - control arms, stabilizer bar / ZF 7.7 - in Rear: Multi-link, coil springs, twin - tube shocks (with load leveling for towing), aluminum lower control arm, independent upper links plus a separate toe link, stabilizer bar / ZF 7.7 - in STEERING Type: Electric rack - and - pinion Turns (lock - to - lock): 3.2 Ratio -LRB-: 1): 16.7 BRAKES Front: 13.8x1.3 - in vented disc, two - piston caliper Rear: 13.0x0.9 - in vented disc, single - piston caliper ABS: Four - wheel WHEELS / TIRES Wheels (in): 18x8.0 Tires: P265 / 60R18 Goodyear Wrangler All - Terrain Adventure with Kevlar FUEL ECONOMY EPA city / highway: 14/22 Observed city / highway / trail: 15.7 DIMENSIONS / CAPACITIES Weight (lb): 5,154 Wheelbase (in): 114.8 Overall length (in): 189.8 Overall width (in): 76.5 (84.8 w / mirrors) Height (in): 69.3 Track f / r (in): 63.9 / 64.1 Minimum ground clearance (in): 8.2 (standard height), 10.4 (suspension position # 2) Turning diameter, curb - to - curb (ft): 37.1 Approach / departure angles (deg): 26.2 (standard height) 36.1 (suspension position # 2, air dam off) / 24.0 (standard suspension), 27.1 (air suspension position # 2) Breakover angle (deg): 18.2 (standard height), 22.8 (suspension position # 2) GVWR (lb): 6,800 Payload (lb): 1,190 Maximum towing capacity (lb): 7,200 Seating: 5 Fuel capacity (gal): 24.6 PERFORMANCE 0 - 60 mph (sec): 7.3 Quarter - mile (sec @ mph): 15.6 @ 90.9 Braking 60 - 0 mph (ft): 132.8 Ramp Travel Index (20 - deg, points)FRAME / BODY Frame: Steel unibody Body: Steel SUSPENSION / AXLES Front: Short - and long - arm independent, coil springs, twin - tube coilover shocks, steel upper - and aluminum lower - control arms, stabilizer bar / ZF 7.7 - in Rear: Multi-link, coil springs, twin - tube shocks (with load leveling for towing), aluminum lower control arm, independent upper links plus a separate toe link, stabilizer bar / ZF 7.7 - in STEERING Type: Electric rack - and - pinion Turns (lock - to - lock): 3.2 Ratio -LRB-: 1): 16.7 BRAKES Front: 13.8x1.3 - in vented disc, two - piston caliper Rear: 13.0x0.9 - in vented disc, single - piston caliper ABS: Four - wheel WHEELS / TIRES Wheels (in): 18x8.0 Tires: P265 / 60R18 Goodyear Wrangler All - Terrain Adventure with Kevlar FUEL ECONOMY EPA city / highway: 14/22 Observed city / highway / trail: 15.7 DIMENSIONS / CAPACITIES Weight (lb): 5,154 Wheelbase (in): 114.8 Overall length (in): 189.8 Overall width (in): 76.5 (84.8 w / mirrors) Height (in): 69.3 Track f / r (in): 63.9 / 64.1 Minimum ground clearance (in): 8.2 (standard height), 10.4 (suspension position # 2) Turning diameter, curb - to - curb (ft): 37.1 Approach / departure angles (deg): 26.2 (standard height) 36.1 (suspension position # 2, air dam off) / 24.0 (standard suspension), 27.1 (air suspension position # 2) Breakover angle (deg): 18.2 (standard height), 22.8 (suspension position # 2) GVWR (lb): 6,800 Payload (lb): 1,190 Maximum towing capacity (lb): 7,200 Seating: 5 Fuel capacity (gal): 24.6 PERFORMANCE 0 - 60 mph (sec): 7.3 Quarter - mile (sec @ mph): 15.6 @ 90.9 Braking 60 - 0 mph (ft): 132.8 Ramp Travel Index (20 - deg, points)Frame: Steel unibody Body: Steel SUSPENSION / AXLES Front: Short - and long - arm independent, coil springs, twin - tube coilover shocks, steel upper - and aluminum lower - control arms, stabilizer bar / ZF 7.7 - in Rear: Multi-link, coil springs, twin - tube shocks (with load leveling for towing), aluminum lower control arm, independent upper links plus a separate toe link, stabilizer bar / ZF 7.7 - in STEERING Type: Electric rack - and - pinion Turns (lock - to - lock): 3.2 Ratio -LRB-: 1): 16.7 BRAKES Front: 13.8x1.3 - in vented disc, two - piston caliper Rear: 13.0x0.9 - in vented disc, single - piston caliper ABS: Four - wheel WHEELS / TIRES Wheels (in): 18x8.0 Tires: P265 / 60R18 Goodyear Wrangler All - Terrain Adventure with Kevlar FUEL ECONOMY EPA city / highway: 14/22 Observed city / highway / trail: 15.7 DIMENSIONS / CAPACITIES Weight (lb): 5,154 Wheelbase (in): 114.8 Overall length (in): 189.8 Overall width (in): 76.5 (84.8 w / mirrors) Height (in): 69.3 Track f / r (in): 63.9 / 64.1 Minimum ground clearance (in): 8.2 (standard height), 10.4 (suspension position # 2) Turning diameter, curb - to - curb (ft): 37.1 Approach / departure angles (deg): 26.2 (standard height) 36.1 (suspension position # 2, air dam off) / 24.0 (standard suspension), 27.1 (air suspension position # 2) Breakover angle (deg): 18.2 (standard height), 22.8 (suspension position # 2) GVWR (lb): 6,800 Payload (lb): 1,190 Maximum towing capacity (lb): 7,200 Seating: 5 Fuel capacity (gal): 24.6 PERFORMANCE 0 - 60 mph (sec): 7.3 Quarter - mile (sec @ mph): 15.6 @ 90.9 Braking 60 - 0 mph (ft): 132.8 Ramp Travel Index (20 - deg, points): 375

Instead, the carbon construction allows the seat frames to be integrated into the load - bearing structure.

Unlike most conventional designs that direct frontal crash energy only to the lower load - bearing structures in the front end, ACE actively channels frontal crash energy to both upper and lower structural elements, including the floor frame rails, side sills and A-pillars.

Unibody construction also allows for integration of an advanced safety design that disperses collision forces through more load bearing channels than a traditional body - on - frame truck design.

Unlike most conventional designs that direct frontal crash energy only to the lower load - bearing structures in the front end, the RDX's latest ACE ™ body structure actively channels frontal crash energy to both upper and lower structural elements, including the floor frame rails, side sills and A-pillars.

the load - bearing design, supports and frame above it consist of galvanized steel sections with solid prefabricated five - layer spruce panels are used in the walls, ceiling and floor.

Hey Jacob, Yep, you're right, it wasn't a load bearing wall, that however wasn't the framing issue Jacque was referring to.

That's not a load - bearing wall; it was just framed out for the pantry and to support the doors.

It is not load bearing, but merely a wall framed out to give us more square footage in our bathroom.