EQUES products are warranted to be free
from manufacturing defects in materials and workmanship starting from the shipping date of EQUES.
The injuries that result
from manufacturing defects in automobiles are often devastating and costly for victims.
Not exact matches
Your UPPAbaby item is warranted to be free
from any
manufacturing defects for a period of 2 years
from the date of purchase under normal use and
in compliance with the operating instructions.
We will gladly accept the return of products that are defective due to
defects in manufacturing and / or workmanship for 90 days
from the date of purchase.
Wildchild Stockholm, Inc. warrants the DockATot ™ product to be free
from defects in material and workmanship existing at the time of
manufacture for a period of one (1) year
from the date of initial purchase.
Warranty: Warranties usually protect
from manufacturing and material
defects in your product, usually for a year or so.
Tesla
in April recalled 53,000 vehicles to address a
manufacturing defect that could prevent the parking brake
from releasing.
Aside
from a few
defects beat into the test car since its
manufacture — cracked taillight lenses and a worn - away name badge — the test M6 seemed no slouch
in the durability department either.
Description of Recall: HYUNDAI - KIA HAS NOTIFIED NHTSA ABOUT A
DEFECT IN CERTAIN MODEL YEAR 2011 SONATA VEHICLES
MANUFACTURED FROM DECEMBER 11, 2009 THROUGH FEBRUARY 15, 2010.
In groundbreaking litigation at the forefront of what would become a Department of Justice investigation and the largest defective product recall in automobile history, Ms. Mincey alleged that the airbag system in her car, manufactured by Takata Corporation, was defective and that Takata knowingly hid the defect from consumer
In groundbreaking litigation at the forefront of what would become a Department of Justice investigation and the largest defective product recall
in automobile history, Ms. Mincey alleged that the airbag system in her car, manufactured by Takata Corporation, was defective and that Takata knowingly hid the defect from consumer
in automobile history, Ms. Mincey alleged that the airbag system
in her car, manufactured by Takata Corporation, was defective and that Takata knowingly hid the defect from consumer
in her car,
manufactured by Takata Corporation, was defective and that Takata knowingly hid the
defect from consumers.
Defended a major U.S. - based automobile manufacturer
in claims of property damage arising
from vehicle and structural fires, and against insurance subrogation actions alleging design,
manufacturing, and warning
defects
An injury due to a
defect or malfunction of a product results
in liability
from the responsible line of
manufacturing.
In the lawsuit, your attorney will need to show that the vehicle that you were driving at the time of the incident suffered
from a
manufacturing defect and that this
defect caused your injuries.
Manufacturing Defects — A
manufacturing defect is one that occurs during the process of making the product and results
in the product deviating
from the way it was designed
in a way that's dangerous to users or consumers.
In general terms, product manufacturing laws state that manufacturers and suppliers can be held responsible for any injuries that result from defects in the design, manufacture, or marketin
In general terms, product
manufacturing laws state that manufacturers and suppliers can be held responsible for any injuries that result
from defects in the design, manufacture, or marketin
in the design,
manufacture, or marketing.
Our experience
in product
defect and failure to warn cases has involved a wide range of products
from raw materials to component parts to fully
manufactured items, including: asbestos, silicone, industrial gasses, lubricants, ladders, table saws, conveyor systems, elevators, forklifts, product handling equipment and automobile and truck parts such as windshields, seats and air brakes.
A product can have a
manufacturing defect when it differs
from the design or differs
from other typical units produced
in the same product line.
Defending claims against hospitals arising
from defects in design,
manufacture and maintenance of equipment and medical devices, including imaging systems, defibrillators, endoscopy equipment, surgical instrumentation and fixation devices.
In other words, when the product differs
from the manufacturer's intended result, a
manufacturing defect claim may be successful.
Products liability law deals with injuries resulting
from use of a product that is unsafe due to its design, the manner
in which it was
manufactured (a
manufacturing defect), and / or the manner
in which it was sold, marketed and / or furnished to the injured party.
Aside
from incentives for companies to cut corners on safety, other causes of these
defects tend to be technological or human errors
in manufacturing and quality control.
Often workplace accidents result
from defects in the
manufacturing, design, or maintenance of equipment.
Injuries resulting
from the malfunction of a firearm or ammunition due to a
defect in design or
manufacture.
For the second set the battery design itself allowed more room for the jelly roll, but a thinner separator still led to poorer protection and reduced tolerance to
manufacturing defects as seen with batteries
from company A. Without the apparent flaw
in the corners, the combination of missing insulation tape, sharp edged protrusions and a thin separator led to a higher probability of short circuit between the cathode tab and the anode, which resulted
in the heating and fire.
The conclusion: Failures resulting
from manufacturing defects or other causes usually occur early
in a drive's life span, whereas random failures can occur at any point throughout a hard drive's life and failures
from worn - out parts tend to spike after three years.
While it didn't showcase the same apparent issues as battery A (shown
in the picture to the right), particularly the ones that were quickly determined to have been a factor leading to thermal failure, the batteries
from company B also had their own
manufacturing defects found after they had been shipped.
Samsung offers a standard one - year warranty
from the date of purchase, and this covers any
manufacturing defects in the device — but not accidental drops or water damage.
Micromax Canvas 1 will hit the stores
from 17th, it will sell
in offline stores (price Rs. 6,999) and will come with 1 year warrant and 100 days replacement promise
in case of
manufacturing defects.
In case of any deviance
from the expected quality, he is expected to correct the
defects and reduce further instances of
manufacturing errors.
QA Engineers make sure that products
manufactured in a factory are functioning according to specifications and are free
from defects.
SELECTED ACHIEVEMENTS • Calibrated 180 mechanisms to meet tolerance and product specifications within 6 days • Introduced the merits of using Gullbit, a specialized tool to fabricate parts to small assemblies
in an efficient manner • Identified
defects in 150 products before delivery to client, saving the company
from losing an important contract • Trained 15 new hires to work as assembly workers for an extended
manufacturing wing