Not exact matches
But because a
fault system can only release as much energy as is built up by grinding tectonic plates, increasing the frequency of large events means there will be less energy to
fuel smaller quakes.
If the
fuel injected into the cylinder isn't burned it passes into the exhaust
system where the O2 sensor sees a rich condition that is outside the normal parameters and sets a
fault code.
P0420, the P is for power train, the 0 means that a
Fuel and Air Metering and Auxiliary Emission Controls
fault exists, and the last 3 digits give a more specific
system of failure.
The P0441 is an evaporative emissions
system fault, and the P0089 is a
fuel pressure regulation
fault.
Consequently, the hard starting condition you are experiencing is caused by a
fault in either the car's starting
system, the ignition
system, the
fuel system (
fuel pressure and amount), and / or the air induction
system.
When this light is activated, it usually indicates a rather serious
fuel or ignition
system fault.
Typically, what you are describing is due to an engine management
fault (s) and such
faults occur in ignition
system components, the
fuel system, and / or the air induction
system.
Electric windows failed Rear door locks failed Infotainment
system crashes Interior creaks and rattles Engine has become very rough
Fuel filler neck leaks Suspension
faults Blue smoke from exhaust New DPF required Falling MPG (as low as 33mpg on one journey!)
Learn verified diagnostic procedures for Variable Valve Timing, Electronic Throttle Control,
Fuel Trim, Evaporative
Systems, Active
Fuel Management, Network
Faults, and Ignition
Systems.
The causes include vacuum leaks and EGR
system faults, a faulty idle air control (IAC) valve or circuit,
faults in the
fuel pump control circuit, defective...
Also, the engine lacked power when cold; I would guess that was because of a
fault in the cold start mechanism in the
fuel - injection
system.
TETRATECH, Spring, TX Asst. Heavy Diesel Mechanic, June 2009 — March 2013 • Dismantled and reinstalled vehicle components • Checked diesel engine fluid levels and performed routine preventive maintenance • Assisted the mechanic in
fault diagnosis and repair • Tuned diesel engines to attain low
fuel consumption percentages • Serviced hydraulic and air brake
systems • Selected proper tools and equipment for parts repairing