To add detail to the door edges, I spray painted trim in gold to match the fish and
glued it in place with wood glue.
I glued it in place with Mod Podge, and sealed over the top with a couple more coats of Mod Podge.
To make your own Concrete House Numbers, cut out the numbers from a piece of thick gasket material, glue the numbers to any waterproof surface, build a perimeter form with foam strips, and
glue them in place with spray adhesive.
Not exact matches
I used packing tape because it'll keep the magnet
in place but I didn't want to damage the door
with anything too permanent like
glue (the tape comes right off when I need it to).
For nests: Cream cheese frosting, optional (I mixed 4 oz cream cheese
with about 1/2 cup powdered sugar to create the
glue to hold the «eggs»
in place) Something to serve as eggs — jelly beans, jordan almonds, yogurt raisins, etc
With a steady expansion plan
in place this is a great time for a
Gluing Operative to join the gluing department of a regional leader that has a real focus on carton excel
Gluing Operative to join the
gluing department of a regional leader that has a real focus on carton excel
gluing department of a regional leader that has a real focus on carton excellence.
With a steady expansion plan
in place and long - term career opportunities on offer this is a great time for a
Gluing Operative to join a dynamic technical department that has a real focus on carton excellence.
With all confetti made I drew a rainbow shape on some blue construction card and then T used some
glue to fill
in the first band of the rainbow and the tipped the red confetti onto the rainbow and moved the confetti into
place.
Glue a frameless mirror to the center and surround it
with shiny new catchalls, such as a metal spackle pan screwed
in place, wire baskets hung from cup hooks, a large hook, and broom clips for toothbrushes.
Next
place the thin ribbon (it should be more colorful)
in the centre of the thick ribbon and attach it
with the hot
glue.
If I have a design that has a lot of extra pieces I «
glue» them down
with honey or soynut butter (PB alternative since my daughter is allergic) so that they stay
in place during travel and being moved around.
Attach the picture of your child to a craft stick
with glue and
place in the front pocket of the book.
You get 5 milliliters of the black
glue placed in a bottle
with a double - blocking system.
Benyus says the strategy has already yielded a wide range of new products that may replicate nature's successes: ceramics
with the strength and toughness of abalone shells, self - assembling computer chips that form by processes similar to the way that tooth enamel grows, adhesives that mimic the
glue that mussels use to anchor themselves
in place, and self - cleaning plastics based on the structure of a lotus leaf.
For nests: Cream cheese frosting, optional (I mixed 4 oz cream cheese
with about 1/2 cup powdered sugar to create the
glue to hold the «eggs»
in place) Something to serve as eggs — jelly beans, jordan almonds, yogurt raisins, etc
Then I added hot
glue to the edges of the ribbon to hold it
in place while I filled
in with more ribbon.
You could also adhere the hearts
with fabric
glue or Stitch Witchery, or you could sew them
in place.)
I carefully cut the Bunny ears off of the headband & attached it to the lid
with hot
glue, and they stayed perfectly
in place.
Adhere everything
with little dabs of hot
glue (
place the smaller items
with tweezers), then nestle the completed figures
in a box filled
with wheatgrass — found at most farmers» markets and florists.
Step 1: Take a 12 - inch Styrofoam wreath, and beginning
with the inside circumference, hot -
glue the almonds
in place, overlapping a few of them to add dimension.
No doubt, there is an uncomfortable number of logos being marketed to kids
in the The Lego Movie, along
with the obvious one that's
in the title, but the film as a whole is very much
in the spirit of Cloud Cuckooland: It's a
place where the use of X-Acto blades and Krazy
Glue breaks the rules but almost everything else goes.
Now,
with his little yellow mind blown, Emmet is pulled into a renegade adventure to help Wyldstyle thwart President Business» plans to cement his neatly ordered Lego world
in place with a substance called Kragle (actually, Krazy
Glue,
with a few of the letters rubbed off its tube).
After covering the seat and backrest springs
with burlap a layer of foam was
glued in place; this is done more for keeping it
in place during installation of the covers than anything else.
In the video above, we get the impression that the trickiest part would be removing the bezel, which is held in place with glu
In the video above, we get the impression that the trickiest part would be removing the bezel, which is held
in place with glu
in place with glue.
The ears are either taped - up
with medical dressing, or held
in place with foam and
glue after the surgery.
You'll spend the entirety of the game
glued to a selection of barriers
placed around the levels,
with no ability to walk or even move away from them save a jetpack... which you can only use to fly to another piece of cover
in what's essentially a short rail shooting section.
Wilke often
placed these objects
in compromising situations — hinged
with pins or
glued to walls and boards,
placed freely on the floor, always seemingly on the verge of disaster.
Stretch carpet to align
with walls and ensure a smooth surface, and press carpet
in place over tack strips or use staples, tape, tacks or
glue to hold carpet
in place.
These are also
placed in a plastic sleeve folder or
glued in a scrapbook
with the children's follow - up work for children to take home at the completion of the program.
After
gluing it on the first time, I had to remove the spacer and widen the hole slightly
in that
place with a file.
How to: Use a good - quality, all - purpose clear
glue with a fine nozzle to stick rhinestones
in place.
To join the pieces, I used wood
glue and screwed the seam
in place with another (scrap) board overnight to hold it
in place while it dried.
I cut another piece of MDF to fit underneath the mantel overhang (I cut the mantel to overhang a bit), and
glued it
in place, holding it together
with clamps overnight.
Once you're satisfied
with how they look,
glue the pieces together, clamp it
in place, and let it dry.
The paper sails and denim flag are also held
in place with hot
glue.
You can either
place these shelves
with shelf pins or use finish nails and
glue to secure
in place.
For extra stability, I secured the joints
with wood
glue and strapped the base
in place to set.
If the ribbon slides down, we recommend securing it
in place with a little craft
glue.
Follow our cheat and cut out butterflies from a wallpaper sample, then stick
in place with a dot of
glue.
Use a large hole - punch to make a series of circles
in the various shades and
glue in place onto white card, starting
with the darkest hue at the bottom and working up to a paler shade.
Surround
with twigs and secure
in place with hot
glue.
Instructions: Wrap container
with burlap securing
in place with hot
glue.
I continued doing this
with each strip; dipping
in glue, wiping the excess off, then
placing inside the jar next to the each other.
Coat the base
in a metallic - finish spray paint, and wrap shiny satin ribbon around the shade, securing
in place with hot
glue or pins.
I tacked it down
with brad nails and liquid nails NOTE: I used a lot of liquid nails and only a few very strategically
placed brads
in the top of the counter top, I knew the
glue, the weight of the plywood itself and the trim would hold it
in place.
I started
in one of the four corners
with just a small dot of
glue to hold the corner of the fabric
in place while I gently pulled taught the fabric and dotted the opposite corner
with glue to attach the opposite end of fabric as well.
Simply coil rope around the vase and secure it
in place with glue.
The open time of the Aleene's
glue I used was about 5 minutes, meaning that
with in five minutes, it was dry enough to hold the yarn
in place.
When I had the granite counter tops installed at my house, the granite guy said that he always installs corbels
with liquid nails, and clamp
in place until the
glue is cured.
Next, attach the return trim pieces
with some liquid nails then use tape to hold them
in place while the
glue sets.