Sentences with phrase «groove joints»

They also discovered an original bathroom window that was closed off, replaced the old shower with an old tub, and planed and added tongue - and - groove joints to the wall planks and put them back up on the walls.

Instead of using expensive and possibly VOC - heavy glues or expensive stainless steel fasteners, they use tongue and groove joints, shown above on the end - to - end pieces or dovetail joints, on the crossing pieces, to hold it all together.

The hardwood came pre-varnished and pre-cut into various lengths from one to four feet, with tongue and groove joints for easy installation.

You're going to love working with this set, and the way it helps you cut perfectly - fitted tongue and groove joints.

Using vast type of devices like, pressure indicators, impact wrenches, slip or groove joint pliers.

It also features a 105 mm wide timber frame with grooved joints which epitomise honest craftsmanship.

Not exact matches

This table saw also allows you to swap out whatever blades you need, including a dado blade, which makes grooves for joint cuts.

The shinbox position really greases the groove for the hip joint and releases the low back.

From these origins, the pectoralis major muscle crosses the chest, and the fibers converge to a common tendon before crossing the shoulder joint and inserting in the bicipital groove on the upper arm (Tobin, 1985; Sauerland, 1994).

Bumps may dislocate your glasses, hydroplaning grooves may induce a roller - coaster wallop, and expansion joints may slice your flight path into disorderly pieces, but the car always sorts itself out.

Cat's eyes, potholes, broken - up blacktop, expansion joints, low - speed undulations, camber changes, aquaplaning grooves — just about any type of vertical irritation.

This level misses the Adaptive dampers (1,190 euros), pumping in Comfort mode more on rural roads and are more offensive over the cross grooves and joints.

Shallow femoral groove, weak ligaments and mal - alignment of the tendons and muscles that straighten the joint are all conditions that will predispose a dog toward luxating patellae.

Common possible underlying musculoskeletal abnormalities that may contribute to PL include torsion and / or bowing of the distal femur, tibial deformity, displacement and / or atrophy of the quadriceps, femoral epiphyseal dysplasia, shallow trochlear groove with hypoplastic or absent trochlear ridges, hip dysplasia, and rotational instability of the stifle joint.4, 5

Things that may be performed in surgery include deepening of the groove in the femur, moving and pinning a ridge in the tibia to straighten the patellar tendon, tightening of the fiber capsule around the knee joint, and even loosening or tightening of muscles that may be trying to pull the patella in the wrong direction.

It sits over the middle of the knee joint and glides back and forth in the trochlear groove.

There are several different surgical techniques that are used to repair a luxating patella, but all of them involve deepening of the trochlear groove so that the patella stays in place and tightening of the joint capsule and soft tissues that surround the joint to provide additional stability.

Conditions which predispose to dislocation of the patella are: a shallow groove; weak ligaments; and mal - alignment of the tendons and muscles that straighten the joint.

Luxated patellas, also called genu valgum or slipped patellas, result from improper formation of the groove at the lower end of the femur in which the patella slides when the stifle joint is flexed and straightened.

2) The patella luxates with flexion and extension of the joint, but returns to the trochlear groove spontaneously.

The extent of patella luxation increases with time as the femur's trochlear groove becomes flatter and flatter, as increased bowing of the leg takes place, and as the structures of the stifle joint weaken.

Imbrication Tightening the joint capsule, known as imbrication, is done on the opposite side of the luxation to prevent the kneecap from having enough slack to pop out of the trochlear groove.

The groove that the patella rides in is not deep enough, or the joint capsule that surrounds the joint is not tight enough to hold the patella in place, or the medial thigh muscles pull the knee cap medially, and / or the defect in alignment of the bones above and below the patella pull it in the wrong direction.

If the joints are flat, the veterinary orthopedic surgeon will cut a deeper V to help hold the kneecap in the groove.

The patella easily luxates manually at full extension of the stifle joint, but returns to the trochlear groove when released.

This happens because the joint groove is too shallow, the joint capsule is lax or the tibial crest is pulling the patella off to one side because it is not in a straight line.

The most common procedures involve one of the following: reconstructing the soft tissues surrounding the knee joint which helps support the kneecap; deepening the groove in the femur bone that the kneecap rests within; or securing the kneecap to the outside of the bone to prevent it from sliding.

Their weaker ligaments and tendons supporting the knee joint can cause the cap to slip out of the V - shaped groove in which it naturally lies.

A range of surgical procedures are used to correct patellar luxation, they involve deepening the groove (sulcoplasty or trochleoplasty), tightening the joint capsule on the luxating side (joint capsule imbrication) or loosening the joint capsule or the non-luxating side (desmotomy) and moving the tibial crest to straighten the patellar ligament (tibial crest transposition).

When the patella slips out of its groove, the joint capsule surrounding it is stretched to allow this motion.

Following the contours of the legs, the grooves and joints are echoed in the notches and stacked edges around the parameters of the blocks.

«When the exposed part of the Samsung pen is bent at the joint, the half remaining in the pen's holding groove is automatically locked into position to provide the user with a sturdy stand.

Daily tasks included reading blueprints, laying out pipe sections, preparing for weld joints, welding joints, threading, ProPress copper, and grooving for Victaulic

Made from solid Scandinavian redwood pine, it comes with craftsy detailing such as dovetailed joints and tongue and groove backs.

If you really want a deep groove, you could use v - joint (I have a post on my blog about that now, for walls and ceilings).

Tongue and Groove This common woodworking joint is used to connect many hardwood and laminate flooring planks.

This Oak furniture range is built using traditional construction methods, the drawers have dovetailed joints with tongue and groove bases.

The Geneva painted dining and living range is made using the best techniques to create solid drawers, dovetail joints, tongue and groove backs whilst incorporating values features such as solid oak tops and a deep lasting painted finish throughout.Featuring modern silver coloured cup handles and with a most attractive sculptured top and plinth.Old Creamery Furniture company showrooms are located in...

You will need to start and stop your router groove at these marks so that the Kreg jig will still be able to get a good solid joint.

Just Doors has a made - to - measure service for its Fielded Panel, Tongue Groove And V Joint, Shaker Style (pictured) and Plain & Flat options.