The 4S layout places the pumps and intermediate
heat exchanger inside the primary vessel.
Not exact matches
Ultrafryer's systems include patented
heat exchangers that put more energy into shortening and have enough power to recover from the temperature drop caused by placing food
inside a vat.
Tubular
Heat Exchanger — This is a heat exchanger with single or multiple tubes inside a common sh
Heat Exchanger — This is a heat exchanger with single or multiple tubes inside a comm
Exchanger — This is a
heat exchanger with single or multiple tubes inside a common sh
heat exchanger with single or multiple tubes inside a comm
exchanger with single or multiple tubes
inside a common shell.
Scraped surface
heat exchangers — has a shell
inside which there is a high speed rotating scraper blade, which has very fine clearance from the shell.
As ice crystals form on the
inside wall of the container, you scrape them off and into the liquid with a hand - cranked metal dasher — hence the name scraped - surface
heat exchanger.
In household refrigerators, for example, the
heat exchanger at the back gets warm because the energy extracted from the objects
inside is deposited there.
a circulator loop which transports
heat from the
inside of the NICMOS dewar to the cryocooler via a
heat exchanger.
The
heat exchangers extract energy from the waste water and the warm, humid water vapour
inside the machine and use it to
heat up the incoming cold water supply, reducing energy costs by up to 10 %.
Water stored within the tank is then
heated when the fluid passes through a
heat exchanger located
inside the storage tank.
If the air is hotter outside than
inside, the
heat exchanger should be used, though, and not bypassed.
I trust they're also considering what happens when the
heat exchanger pipe cracks
inside the molten salt (think hot liquid glass, basically) and the stuff goes up in a big steam explosion and rains out downwind — if they have a fairly innocuous material that can be hosed off a neighborhood, this would be nice to have around any place there's waste high temperature
heat being thrown away that could be captured.
Another friend of mine Brian suggested that we use the smaller barrels to form the
Heat Exchangers and then place these smaller barrels
inside the 45 gallon drums.
The evaporator coil is
inside - the «A» coil, as it's sometimes called,
inside the duct work just above the furnace's
heat exchanger.