Not exact matches
Structural composites are typically made up of
high -
strength fibers embedded within a polymer matrix, says Scott R. White, an aero
Along with being compatible with basically every Rogue attachment, it's
structural integrity and safety features are comparable to that of
high end collegiate
strength and conditioning equipment.
Instead of asking small connective tissues to stabilize heavy loads overhead, often being received at
high velocities, why not build better movement patterns and serious
structural strength by using some of the exercises below?
Genesis says (let's get used to referring to this as a brand name) the G90's overall body rigidity has been increased to a point 6 - percent
higher than that of the Mercedes S550, because of 52 - percent advanced
high -
strength steel, three times the amount used in the old car, and because of 650 feet of advanced
structural adhesives.
It combines
high -
strength steels with aluminum and carbon fiber to cut weight while keeping
structural rigidity and safety
high, and it made its first debut in the all - new BMW 7 Series.
The auto maker says the new model posts double - digit gains in overall
structural rigidity over the old Golf, partially due to the use of more
high -
strength body panels.
Most important, the 5 Series uses the «cluster architecture» of the 7 Series, without the carbon fiber but making extensive use of lightweight,
high -
strength steel, magnesium, and aluminum (used for the trunk, trunk lid, doors, and roof) to reduce weight by up to 137 pounds over the previous 5 Series — while also improving
structural rigidity.
Advanced
high strength steels in areas such as the rear floor, are joined using more than 2,600 self - piercing rivets, 238.8 - ft (72.8 m) of
structural adhesive and more than 560 spot - welds.
The new lighter and tighter body is achieved through increased use of
high strength and ultra
high strength steel, the addition of a larger front tower strut brace (as used in sports cars like the Nissan 370Z), and a new rear
structural support built into the rear pass - through / parcel shelf.
Let's not forget the increased amount of new
high -
strength steel and
structural reinforcement Kia added to the Sorento improving the torsional rigidity.
A combination of ultra
high -
strength steel sheet and
structural elements of cast aluminum is used in the occupant cell.
Smaller dimensions combined with increased use of
high -
strength steel and more
structural adhesives has yielded a chassis that's notably stiffer, a development that contributes to everything from better steering feel and cornering stability to an utter lack of squeaks and rattles, even in the preproduction testers I sampled.
Thanks to greater use of
high -
strength steel, stronger welds and 23 feet of
structural adhesive, it can absorb 40 percent more collision energy while stiffness is up 70 percent.
Large load - bearing members in the new BMW 5 Series Sedan, and strategic use of
high - and ultra-
high-
strength steels in the roof, side members and rear, give the body
high structural strength.
Extensive use of
high -
strength steel (53 percent for 2017 versus 21 percent in the previous generation) and 394 feet of
structural adhesive are employed in Elantra Sport's construction.
The new 7 Series is also substantially lighter than the previous model thanks in large part to a new internal structure called Carbon Core which uses a combination of carbon - fibre reinforced plastic (CFRP) and
high -
strength steel for the vehicle's major
structural components.
The 2500's body is supported by a
high -
strength, 50,000 PSI steel frame with 8 separate
structural cross-members.
High -
strength steel makes up 54.9 percent of the new Accord's body, and Honda uses
structural adhesives to increase structure rigidity and shave a few pounds off its weight.
The company also used a
high proportion of ultra
high strength steel (53.5 %) and expanded the use of
structural adhesives to reinforce welded seams.
Structural Parts GM uses materials such as Ultra
High -
Strength Steel (UHSS) and aluminum to help meet more stringent crash - worthiness requirements and improve vehicle performance, while limiting or reducing overall mass.
High -
strength steel was used in strategic areas to augment overall
structural integrity.
This is a completely redesigned unibody that uses more
high -
strength steel, new welding techniques, and upgraded cross-sectional and joint designs to improve overall
structural rigidity by 70 percent over the outgoing model.
To improve edge - of - the - envelope performance and responsiveness during spirited driving, the body employs
high tensile -
strength steel in approximately 60 % of its
structural frame members.
A fully boxed frame utilizes
high -
strength steel to increase
structural rigidity, resist bending, twisting and shaking.
The body side panel is fabricated from
high -
strength and formable AC600 aluminium, which has also been used for
structural reinforcement — both engineering firsts for Jaguar.
The Accord's unit - body uses a large percentage of
high -
strength steel, which gives the Accord
high structural strength for improved ride quality and more precise cornering.
Ride and handling improvements are made possible by a 10 - percent more rigid unit - body structure resulting from enhanced
structural designs and increased use of
high -
strength steel (55 percent on the sedan compared to 50 percent on the previous model).
The new TL also uses a
higher percentage (47.6 - percent) of
high -
strength steel to further improve
structural strength while helping to reduce weight.
Twin
high -
strength steel roll hoops braced into the rear subframe also help contribute to the vehicle's stiffness and increased
structural integrity.
The TL also uses a large percentage (47.6 - percent) of
high -
strength steel to improve
structural strength while helping to reduce weight.
Constructed of
high tensile -
strength steel, the platform provides
structural rigidity for rock - solid performance on - and off - road.
†
Structural integrity of our new cars is also important during a collision and that's why we provide safety cages using
high -
strength and ultra
high -
strength steel, along with rollover protection in our vehicles.
The Accord should be a sharp handler thanks to a stiffer body made from 54.2 percent
high strength steel and the increased use of
structural adhesives to increase rigidity and reduce weight.
That trimmer platform is engineered with a smarter, more complex matrix of
high strength and ultra-
high strength steels along with a heavy use of
structural adhesives.
The ACE body structure uses a network of interconnected
structural elements - now using more than twice the
high -
strength steel as the previous generation RDX - an increase of 56 percent - to absorb and distribute crash energy away from the passenger compartment.
* Sensor operated roll bar behind rear seats *
High -
strength UKL steel platform * Reinforced
structural elements adding 115 kgs of weight
Benchmark Safety: Class - Transcending Use of
High -
Strength Steel A host of
structural enhancements combined with a full offering of active and passive safety systems makes the Matiz Creative a segment leader in its class.
There have been some
structural updates by adding
high -
strength steel sheet metal to the sills, crash rail, and foot wells.
These include a new double - ring rear body / frame structure, a world's - first ultra-
high strength steel, inner and outer front door ring design, and Acura's first use of
high - performance
structural adhesive and RDX's first use of sound - absorbing acoustic spray foam.
Where the new Elantra stands out is with Hyundai's focus on vehicle dynamics at this price point, specifically the increase in
high -
strength steel and
structural adhesives throughout, which translates to tight cornering at
high speeds with little roll.
The entire body shell has been made stiffer and lighter thanks to extensive use of advanced
high -
strength steel, and the use of Tailor Welded Blanks (TWB) reinforces key
structural members.
The foundations,
structural posts, cross beams and floors are made of the
highest quality local tropical hardwood (Campano and Nispero), which provides
strength, stability and durability.
High -
strength compound bamboo is the main
structural material of Para Eco House.
High -
strength drawn carbon
structural cables, made of a series of small strands twisted together like a vine, form larger cables which are attached to spiral circular rods.