Not exact matches
The inner fibers of the hemp stalk, called hurds, are known for their low
density and
high absorbency, which means they can be mixed with plaster or lime to make cheap and efficient building
materials.
Contacted in 2011 by The Tyee, Dr. Carl E. Brown, research manager of Emergencies, Science and Technology Division at Environment Canada confirmed that «a concern with bitumen fuels is their
density is quite
high and chances are if those
materials were spilled into the marine environment, those products might sink.»
MDX can solve this problem as it uses two energy spectrums and a dual - layer detector to filter
materials by their chemical composition, leaving a clear
high - definition image that shows
density difference based on chemical composition.
For example, metal, glass, stone, calcified bone and
high density plastic in bulk food
material.
Eagle's
Material Discrimination X-ray (MDX) technology can detect thin glass in most food - based products and is especially valuable for inspecting foods with
high variations in
density, such as cereals and nuts.
Crosslinked polyethylene is a
high density closed cell foam characterized by a compact feel and resistance to water that enables the
material to be fabricated, thermoformed or compression molded in many ways.
Underfoot the Biometric sole provides the state of the art in sole technology, featuring dual
density PU, produced in a highly scientific environment to maintain the
highest performance and quality standards from the
material.
Each book is printed on a synthetic
material made from non-toxic, flashspun
high -
density polyethylene fibers that feel like paper but are very difficult to tear.
It is filled with
high -
density foam and free of all chemicals and
materials that could harm a growing baby.
Materials: The main base is constructed of 100 %
high density polyeurethane foam, the cover is made from 100 % water resistant polyester, and the inserts are made from 100 % cotton
Layers of
high -
density fiber fill offer a comfortable yet ultra-firm sleeping surface with
materials that are 100 % non-toxic and free of polyurethane foam, vinyl and chemical flame retardants.
The Maxi Air Cool topper helps draw moisture away from the skin helping to keep baby cool to prevent them from overheating Includes waterproof gliding mattress protector / sleeve The core of the mattress is mini bonnell Spring units encased in a
high density foam
material to offer maximum support and durability Zip off cover which can easily be removed and replaced for washing 5» Super thick Excellent hygiene, and hypo - allergenic properties.
This crib mattress is made with a firm and
high -
density foam
material, ensuring your baby optimum comfort.
This crib mattress is made with a
high -
density foam
material that ensures its
high quality and useful life even in the years to come.
A neodymium tweeter magnet motor assembly and
high -
density flux ferrite woofer magnet are
high - quality
materials that provide a
high - quality result.
Material: Lures are usually made of either
high -
density plastic or wood.
It uses cheap
materials and has a
higher energy
density than lithium - ion cells.
Shirley Meng, a professor at UC San Diego's Department of NanoEngineering, added, «This beautiful study combines several complementary tools that probe both the bulk and surface of the NMC layered oxide — one of the most promising cathode
materials for
high - voltage operation that enables
higher energy
density in lithium - ion batteries.
British researcher Jonathan Hobley at the Institute of
Materials Research and Engineering recommends that foreign scientists begin networking as soon as they arrive — taking advantage of the
high density of labs.
Wang said his research could yield the «holy grail» of magnets, having very
high energy
density but made with common
materials.
Scientists prove that depleted AA batteries will bounce
higher when you drop them, as inner
material loses
density
In January 2005, for example, Ohio State University geophysicist Ralph von Frese and his colleagues noticed a concentration of
higher - than - average -
density material in the rock about a mile under the surface of the East Antarctic ice sheet.
Says
materials scientist Michael Heben, who worked on the project: This points to the possibility of
high -
density hydrogen storage at room temperatures.
At the same
density, however, the novel
material produced in the laboratory can carry a much
higher load.
But the
materials are tightly packed in the capillary column and remain so as they're pumped out, resulting in the
high volumetric energy
density.
Although their
density is below that of water, their stability relative to their weight exceeds that of massive
materials, such as
high - performance steel or aluminum.
Standard rechargeable batteries are only marginally suited for
high performance: «To raise the energy
density, you need to increase the voltage or the capacity, and that is where traditional electrode
materials and electrolytic fluids reach their limits,» explains the physicist.
«What this discovery implies is that if you prevented the static stripes from ever occurring, you might end up with a
material that could act as a superconductor at a lower
density of doping — and a much
higher temperature,» Davis said.
A multi-institution team of scientists led by Texas A&M University chemist Sarbajit Banerjee has discovered an exceptional metal - oxide magnesium battery cathode
material, moving researchers one step closer to delivering batteries that promise
higher density of energy storage on top of transformative advances in safety, cost and performance in comparison to their ubiquitous lithium - ion (Li - ion) counterparts.
It is an electron
density that is one to two orders
higher in magnitude than what could be achieved in 3 - D bulk
materials, the researchers said.
The increase in
density, and a corresponding increase in stiffness of the molten
material, results because the
high pressure found deep within the planet would have forced each silicon atom to have six oxygen neighbors, not the four neighbors typically found at lower pressures.
«Another, unexpected bonus of this electrolyte's
high energy
density is it could potentially expand the use of flow batteries into mobile applications such as powering trains and cars,» said the study's corresponding author, Wei Wang, a
materials scientist at DOE's Pacific Northwest National Laboratory.
The
material that we have developed utilises
high - quality carbon nanotubes grown at a
high density to allow electrical transport throughout the composite
material.»
The combination of the
high electron
density and potent electron interactions are not seen in other
materials and the quantum regime enforced by the tight passageway, might here be engendering some new kind of electron transport.
Thin - film ferroelectrics have for a long time been used to make non-volatile memory devices, however it is extremely difficult to miniaturize them in order to achieve
high density / storage capacity and, in addition to this, they are made of
materials that are «incompatible» with the production processes used in modern microelectronics.
High -
density forests are necessary for certain applications of carbon nanotubes, like electronic interconnects and thermal interface
materials, he says.
«The
high density aspect is often overlooked in many carbon nanotube growth processes, and is an unusual feature of our approach,» says John Robertson, a professor in the electronic devices and
materials group in the department of engineering at Cambridge.
Tellurium electrodes have
higher energy
densities and may be charged and discharged faster than conventional electrode
materials.
Expectations are rising for the multiferroic
material as a candidate for an innovative functional
material, as it may contribute to the realization of power - saving
high -
density information - recording elements and power - saving ultra-
high-speed logic elements.
«This work demonstrates the unique capability of micro-to-nanoscale topographies of the crumpled graphene - Au nanoparticles —
higher density, three - dimensional optically active
materials — that are further enhanced by the formation of hot spots, bringing the nanoparticles closer,» explained Juyoung Leem, a graduate student and first author of the study, «Mechanically Self - Assembled, Three - Dimensional Graphene?Gold Hybrid Nanostructures for Advanced Nanoplasmonic Sensors,» published in Nano Letters.
PNNL's expertise in
materials synthesis and processing will also contribute to the development of low - cost,
high - capacity electrode
materials for advanced batteries with unprecedented energy
density and power.
«Because a plasma is inherently such a
high energy
density material, you don't destroy it.
«In
high - energy laser systems, which use conventional solid optics, the maximum fluence (energy
density) is limited by the damage of the
material,» said Robert Kirkwood, the lead author on the paper and programmatic lead for the campaign.
Duan pointed out that the same porous scaffold design they used with niobia could be used with other active
materials like silicon or tin oxide, which boast
high energy
density, the ability to store lots of ions for longer - lasting batteries.
«The pellet
material is stronger and lighter than commercial graphite electrodes and could be promising for electrical storage applications with
high energy and power
densities,» he said.
These
materials include new classes of superconductors, superhard
materials,
high - energy
density and hydrogen storage
materials, new ferroelectrics and magnetic systems, and
materials that resist chemical changes under extreme conditions, said Russell Hemley, director of the Geophysical Lab and associate director of EFree.
The aim of the current research project is to develop
high energy
density batteries using organic
materials for a sustainable way of storing energy.
This capability involves 1) the development of catalytically active and corrosion resistant
high surface area electrodes for photoelectrolysis 2) fine tuning the porosity of porous
materials and 3) templating of porous
materials to yield freestanding ALD coatings that are fully tunable in
density and porosity.
Nice
Material: These boxes are constructed from
high density foam and built to last.
Material: PVC + foam
On a
high rigidity PVC core there is EVA
high density foam outer layer, which is a soft, extremely elastic yet tough
material.