You could make this whole table with just a miter saw, a pocket
hole jig and a drill, but I'll show you some of the ways I used other tools to get what I think is a better look.
Use a pocket
hole jig to drill pocket holes in the ends of the supports and attach one at the top and bottom and one in the middle.
This month we partnered with Kreg for the Monthly DIY Challenge and used their R3 pocket
hole jig to build something.
At the recommendation of Live Simply, I used a pocket
hole jig system to pre-drill and screw together the boards.
Not exact matches
When hanging, I made mine permanent by covering the screws and Kregg
jig holes with the crown molding.
Drill small
holes along the length of the paint stick 1/2 ″ apart, using a
jig saw cut the edge of the board to meet the
holes.
Pesaro, Italy About Blog A widest range of innovative and state - of - art woodworking tools, router bits, saw blades,
jig and sabre saw blades,
hole saws, boring bits and so much more.
Locate and mark reference points and
holes for installation using
jigs, templates and measuring instruments.
$ 75 DIY Industrial Farmhouse Table wood boards + saw + laminate + wood glue + kreg
jig + pocket
hole screws + wood stain + polyurethane + angles, screws and straps + black paint
Drill 2
holes in the opposite sides of the circle big enough for your
jig saw blade.
When all the kreg
jig holes are drilled it's time to assemble.
Use the kreg
jig to drill
holes.
But I don't own a Kreg
jig (yet)... are the pocket
holes still doable with out one?