It also sports a JPP
hood designed with a cutout kit for a snorkel, and the hood latch is Brass Monkey with a black Willys logo.
The J - Wagon features a version of the JPP
hood designed with a cutout kit to work with the available snorkel, an appropriate choice for the sealed - cabin style of the vehicle.
Not exact matches
The falafel is lightly fried using our «Perfect Fryer» which is
designed for use in restaurants without an exhaust
hood, and our high quality chicken and steak come precooked from professionals and are prepared for service in steamers, allowing franchisees and employees
with minimal to no restaurant experience to run each location
with confidence.
With adequate back support, an adjustable hood and a well - designed waistband, there has never been a more practical baby carrier for anyone who is out and about with the b
With adequate back support, an adjustable
hood and a well -
designed waistband, there has never been a more practical baby carrier for anyone who is out and about
with the b
with the baby.
Pros - Looks stylish especially brown leather detailing Very roomy, good for growing baby Easy latch system
with isofix, good for car users Spacious storage beneath pram Easy brake system Cons - Car seat does not match rest of pram Slight rock to it Not good for rough pavements best for flat shopping centre type floors otherwise baby is shaking all over the shop (i guess this is where rubber wheels come in) Not good over kerbs no foot tilt to help Handle poor
design when folded away the handle scratches on the floor Cant fit into fiesta boot The
hood keeps falling backward when walking, not robust to hold itself Could be slightly smoother at turning corners Overall the venti is a good looking pram however due to the comfort of the drive i would not recommend it as a sleeping newborn quickly wakes up due to the rattling.
It is
designed with a removable
hood that offers an extra advantage to you baby.
It is an umbrella stroller
with a
hood for sun protection and a slim
design that folds easily to fit in any space available.
Celebrate is an all over
design with the print continuing across the inner shell of the carrier and the detachable
hood.
Able to keep the occupant warm even in extreme, freezing conditions as low as 5F, it incorporates a mummy - style
design with a useful
hood that effectively retains heat.
One of those things: rocking the convertible sports bra she
designed,
with a detachable
hood.
Very rare khaki quilted cotton coat
with fitted bodice, full sleeves,
hood and leather trim
designed by Yves Saint Laurent dating to fall of 1976 from the well documented «Russian Colle...
Hooded shearling parka in button - front
design Attached
hood Long sleeves Front welt pockets Front flap pockets Concealed front zip
with button closure About 30» from shoulder to hem Fur type: Dyed shearling Fur origin: Spain Polyester / cotton Dry clean Imported
She states that there was a sudden demand for fashion that grew in China,
with one of her most popular factory
designs was a brightly colored winter coat
with a
hood.
Designed in a neat, boxy - fit
with slim sleeves, the Bickmor hoodie is made from an ultra-soft cotton - blend brushback fleece
with a self - fabric lined
hood and simple drawcords.
Ready for ski slopes and styled for city streets, it's
designed with plenty of pockets, a duo of drawcords for shape, and an oversized
hood with removable faux - fur trim.
To keep
with the airy feel of this room, I
designed the iron and glass open shelving unit beside the vent
hood, and added an etched glass pantry door, and wood and black accents throughout.
love the cropped hoodie but the zipper and
hood were ill -
designed, the zipper wraps around the
hood on one side so the zipper is lopsided, also the
hood is super big and lies over my shoulders, I think they tried to make a unique jacket but it was just over
designed,
with all that said I still wear the jacket
Very warm and very chic, most of the parka
designs come
with nice and warm
hood embellished
with fur and, of course cozy pockets (which are very useful).
An update on a Nike classic, the new Windrunner blends a beloved colorblocked
design with modern updates, like a
hood with a bill and drawcord for warmth, plus vents at the back for airflow.
And the
hood itself is lined
with a striped light blue fabric that shows it was so thoughtfully
designed,
with careful attention to detail.
Bonanza dresses are bedecked
with inspiring printed patterns while sweaters, jerseys and
hoods are beautified
with vibrant contrasts and stylish
designs.
It's already been confirmed, that Wii U is indeed more powerful than the PS3 & 360, also Wii U's GPU has the ability to act and perform the same functions as a CPU, so that means the GPU can take alot of slack off of the Wii U's CPU, and that's what's going to make it possible for Wii U to keep up
with the PS4 and next Xbox, it's called a Memory Intensified
design, and it's a unique and very clever
design of hardware by Nintendo, Wii U has a bit more power under it's
hood than you think, just wait till 3rd partys start to master Wii U's hardware, I see good games on Wii U's horizon.
The range of acoustic telephone
hoods have been
designed to enable you to answer and make phone calls including mobile phone calls in a safe, quieter and less stressful environment improving speech privacy and minimising misunderstandings, alternatively they can be fitted
with information terminals, tablets or other instruments.
With the strip of LEDs in the light bar across the
hood, the big wheels and tires, and a dramatic graphics package created by Mazda
design manager Ken Saward (yet another Mazda employee who is a racer), this car was positively bad - ass.
The chopped black Jeep Quicksand sports a 392 cubic - inch Hemi under what's left of its
hood, and it's
designed for kicking up sand, quickly,
with all four wheels, as a sort of off - road dragster.
The only truly new element in the Avenir's
design is the horizontal bar across the traditional vertical - bar Buick grille,
with the Buick emblem encircled and placed on the grille rather than on the
hood.
The exterior
design is distinctly Buick
with the blue - accented projector - beam headlights,
hood - mounted portholes, and wide waterfall grille.
Henrik Fisker and Galpin
designed the Rocket — it comes packed
with a V - 8 engine that offers 725 horsepower underneath its racing striped
hood.
CARS.COM Looks like: Robocop
designed a Legacy GT Wagon Defining characteristics: Wagon
with a
hood scoop?
It still follows the same long
hood, short deck proportions, but tightens the overall look into a more muscular package
with its shorter front overhang and rounded, fastback profile that fit into Mercedes - Benz's new «Sensual Purity»
design language.
Roberts installed an aftermarket Shelby
hood and a Shelby front valance
designed to integrate
with a stock chrome front bumper — the Shelby valance improves airflow to the A / C condenser and radiator, as well as adding hot looks.
The sporty version has its three - pointed star in the grille while the traditional luxury version has an S - class grille
design with a
hood ornament.
Other notable
design refinements: the rear end features a side - to - side LED light bar (like the 911 C4)
with four - point brake lights, the rear spoiler (which automatically deploys at 62 mph) has been moved backward to the rear lip, the rear end sports a new Porsche logotype, a new front end and
hood are bolder than before, and the car's sides are far more aggressively sculptured.
It resembles the Shelby Super Snake Wide Body Concept we saw earlier this summer, except it's red
with even wider front wheel wells and a smoother, sleeker
hood design.
All the boutique supercar tricks are present,
with scissor - style doors, a clamshell -
design hood, and plenty of diamond - quilted leather inside.
Whereas the CTS coupe was radically shaped, the two - door 2015 Cadillac ATS adopts a rather restrained version of Cadillac's angular
design language, despite the opportunity afforded by all new sheetmetal (only the
hood is shared
with the sedan).
It features the characteristic open - topped Mini
design cues,
with a
hood that folds onto the rear deck like a vintage pram, and multiple personalisation options to differentiate it from the herds of hatchbacks roaming the roads.
The 2010 Altima receives prominent exterior modifications, notably a new
hood with a «power bulge,» a restyled grille and front bumper, and fresh wheel
designs.
Removable carbon fibre roof panel, uniquely calibrated SLA - type front and rear suspension
design, standard Magnetic Selective Ride Control dampers, standard smart electronic limited - slip differential (eLSD) integrated
with Electronic Stability Control and Performance Traction Management systems, 19x10 - inch front and 20x12 - inch rear spin - cast aluminum wheels on Michelin Pilot Sport P285 / 30ZR19 front and 335 / 25ZR20 rear tires, extended fenders by 56 mm at the front and 80 mm at the rear, Brembo brakes (371x33mm front and 365x25mm rear two - piece steel brake discs, aluminum six - piston front and four - piston rear fixed calipers), a front splitter, spats around the front wheel openings, a unique carbon - fibre
hood with a larger vent, larger front fender vents and unique air blades over the inlets on the rear fenders, a larger unique rear spoiler, and rear - fascia openings that are larger than the Stingray.
Under the
hood is a Pro-Built 350ci V8 ZZ4 engine
with a BH Custom
Designs air cleaner case and TH350 automatic transmission.
An aluminum
hood, trunk, and door
design eliminate unnecessary weight so you can soar down the road
with nothing in your way.
It included a 2.5 - litre 4 - cylinder Atkinson cycle petrol engine
with D - 4S direct injection technology, water - cooled permanent magnet electric motor, 3 LED - projector headlamp
design, Daytime Running Lights (DRLs) are integrated into the upper bumper surface, rear spoiler integrated within the boot lid, L - shaped combination lamps
with three - dimensional
design, Fluid Titanium body colour, 2 - zone dashboard, seats, door panels and instrument binnacle
hood upholstered in amber leather.
(569 N • m) of torque • SRT performance: 0 - 60 mph in the low five - second range, 0 -100-0 in under 17 seconds, 60 - 0 mph in approximately 110 feet • Benchmark braking • World - class ride and handling characteristics across a dynamic range • Functional, performance - oriented exterior
design and race - inspired interior appointments • Benchmark performance at the best price PRODUCT CHRONOLOGY 2008 MODEL YEAR EXTERIOR • New color: Steel Blue Metallic Clear Coat INTERIOR • Available Side - curtain Air Bags • Available SIRIUS BackSeat TV ™ • Available SRT - engineered KICKER ® premium surround sound system • New instrument panel cluster • New center console • SRT - exclusive Reconfigurable Display (RCD) • LED lighting in the front cup holders and front - and rear - door map pockets • Dark Slate Gray interior color • Agate - color accent stitching • Carbon - fiber - like pattern door handles and carbon - fiber - like leather - trim steering wheel POWERTRAIN / CHASSIS • New optional 20 - inch aluminum wheel PACKAGES • Super Bee Special Edition —
with Surf Blue Pearl Coat 2007 MODEL YEAR EXTERIOR • New color: TorRed INTERIOR • Optional Rear Seat Video system, including KICKER ® Mobile Surround Sound PACKAGES • Super Bee Special Edition —
with Detonator Yellow exterior color • SRT Track Experience — Standard 2006 MODEL YEAR New high - performance version of the Dodge Charger
with new 6.1 - liter HEMI ® engine EXTERIOR • Colors: Brilliant Black, Bright Silver, Inferno Red • New front fascia
with integrated brake duct inlets • Insert in rear fascia • New rear spoiler • Body - color mirrors and door handles (carryover base car) • «SRT8» exterior badge (deck lid) • Mesh grille insert
with «SRT» badge • Brake duct system in front belly pan • 16 mm clearance rear fascia to exhaust tips • New
hood with scoop, bezel and underhood duct • New
hood silencer pad INTERIOR • Colors: Dark Slate / Light Slate Gray • Sport front seats
with matching trim on rear seats • Red accent stitching • Carbon fiber leather on steering wheel upper • Satin finish steering wheel spokes (from 300C) • Satin Silver shift bezel and lock knobs (from 300C) • «SRT8» badge below right - hand air conditioning outlet duct • Satin Silver color for center stack bezel POWERTRAIN • 6.1 - liter HEMI ® engine (425 horsepower / 420 lb. - ft.)
Small, sporty crossover
with available sport - tuned R - design model; new front and rear styling including new hood and headlights With everything from folding booster seats to
with available sport - tuned R -
design model; new front and rear styling including new
hood and headlights
With everything from folding booster seats to
With everything from folding booster seats to a...
For exterior modifications, the Mustang has been repainted
with BASF's R - M Carrizma Candy Blue paint and also features a Classic
Design glassback roof, Colecraft's billet custom fender and
hood vents and WMS» custom aluminum grill.
With a new smooth appearance
hood and new wheel
designs, the 2010 Chrysler Sebring Convertible gets an updated appearance.
(569 N • m) of torque, the Dodge Charger SRT8's performance - tuned ride and handling offer a world - class performance sedan experience • Builds on the momentum of Charger, HEMI and SRT Dodge Charger SRT8 is the quickest sedan in the Dodge lineup • SRT performance: 0 - 60 mph in the low 5 - second range, 0 -100-0 in under 17 seconds, 60 - 0 mph in approximately 110 feet Dodge Charger SRT8 formula: balanced performance • Functional, performance - oriented exterior
design features 20 - inch SRT wheels, 3.5 - inch chrome exhaust tips, front fascia
with air dam and cooling ducts, and functional
hood scoop and rear deck lid spoiler.
Chrysler, in conjunction
with Hurst Performance Corporation, developed the A-12 Chrysler 300 Hurst package
with a specially
designed fiberglass power bulge
hood with two depressed rotary
hood latches, a winged aerodynamic styled trunk spoiler, sweeping quarter extensions and a striking paint scheme of Spinnaker White
with gold metallic accents and special striping.
Made from aluminum rather than conventional steel, the front side walls and the
hood (
with power dome) make an important contribution to the models» lightweight
design concept, while at the same time improving axle load distribution.
The exterior is distinguished
with a close resembling GT24 front bumper fascia and
hood vents, integrated headlamp daytime driving LEDs, colored side view mirror housings, roof spoiler, rear bumper fascia
with fitted dual exhaust diffuser
design.