Sentences with phrase «inch seam allowance»

On your sewing machine, sew around the edge of the ear using a quarter inch seam allowance.
To cover a pillow using the least amount of fabric possible, measure the pillow from seam to seam in each direction, then add a 1 - inch seam allowance on each side.
You could cover it in anything including fabric or felt like I used for the larger pair - just leave about a half inch seam allowance and glue.
My sewing skills are very elementary, and allowing that one inch seam allowance keeps things simple.)
Use 1 / 2 - inch seam allowance for backings and press the seams open to distribute the extra fabric fullness along the seam.
Step 7: Lay your passport holder flat and using a 1/8 inch seam allowance sew along the two short edges of the passport holder (you can see this finished in the photo above on the inside edges that are now folded over).
My sewing skills are very elementary, and allowing that one inch seam allowance keeps things simple.)
Lay the first two right sides together and do a basic stitch with a quarter inch seam allowance on one side to sew the two pieces together.
You may have to cut seperate pieces and sew them together to reach the desired width for your skirt - if you're piecing the fabric together, remember to add a 1/2 inch seam allowance for each seam you need.
Sew them along their short ends, leaving a 1 / 4 - inch seam allowance.
Sew the short linen end closed leaving a 1 / 4 - inch seam allowance; do not sew the polyester end shut.
Starting at the linen end, sew up the sides, leaving a 1 / 4 - inch seam allowance.
Sew with 1/2 inch seam allowance, trim with pinking shears if using.
To sew rows: Put the backs (the fleece side) of the squares together and sew with a 1/2 inch seam allowance.
Fold rectangle, right side up, so short sides meet; stitch along that edge with 1 / 4 - inch seam allowance.
Next, line up the bandannas right sides together and sew along the edge using a 1/4 inch seam allowance.
Using a 1/4 inch seam allowance, stitch around three of the four sides.
Now stitch all four sides using a 1/4 inch seam allowance.
Sew each long side, using a 1/2 inch seam allowance.
This includes 1/2 inch seam allowance.
Stitch using a 1/4 inch seam allowance.
Sew one white stripe to a red stripe lengthwise using a 1/4 inch seam allowance.
Use a 1/4 inch seam allowance.
Because the fabric should fit snugly over the pillow form, this measurement includes a half - inch seam allowance.
With a 1/4 ″ inch seam allowance, sew around the squares leaving about 3/4 inch of an opening at the bottom.
I used a 1/4 inch seam allowance and it was still too tight.
Starting right after where your gap will be, sew the fabric together, with about 1/4 -1 / 2 inch seam allowance.
An accurate 1 / 4 - inch seam allowance is important.
Stitch around the perimeter of the hexagon using a 1/4 inch seam allowance.
Sew the squares into rows using a 1/4 inch seam allowance, and then sew the three rows together to form a 6 1/2 inch square.
Stitch around the outside of the hexagon using an 1/8 inch seam allowance, enclosing the gap in the lining as you sew.
To help keep everything all lined up nicely, I take a piece of painter's tape and mark a 1/2 inch seam allowance (using the guide on my machine).
With a 1/4 ″ inch seam allowance, sew around the squares leaving about 3/4 inch of an opening at the bottom.
Add your seam allowance (I used a 1/2 inch seam allowance).
Finish your headband by top stitching around the edge of the headband using a 1/8 inch seam allowance.
Sew all panels to each other with 1 / 2 - inch seam allowance.
Pin all four edges, then sew, leaving a 1/4 - inch seam allowance.
Using a 1/4 inch seam allowance, sew the pocket pieces together, sewing on the two long sides and the top short side.
Sew around all 4 edges of the rectangle using a 1/4 inch seam allowance and making sure to leave a 1 to 2 inch gap between where you start sewing and where you end sewing so that you can flip your project right side out.
Now cut around leaving about a.5 inch seam allowance.
Factor in a 1/2 inch seam allowance.
You will need Basic sewing supplies Lightweight tracing paper Barkcloth drapes or yardage 3 buttons, in a matching color Layout and construction 1 To make a cover for a round footstool, begin by measuring the diameter and make a custom pattern piece for the top, adding a 1/2 inch seam allowance.
a b c d e f g h i j k l m n o p q r s t u v w x y z