Sentences with phrase «inch slats»

In our newly built home we currently have only blinds (white wooden 2 1/2 inch slats) on every window in our home and that was the plan as we live near the ocean and we wanted a very airy, open coastal look.

If there are at least 20 2 × 4s in your mix (or fifteen 2 × 6s or eight 2 × 12s), these can be cut down into 1/4 inch slats.

When the truck turned the top corner, I caught my last glimpse of the cows, their noses frantically pressing through the six - inch slats — a last ditch attempt to escape their premature and pointless execution.

I also installed two of the 24 × 48 - inch slats inside the dryer, one 2.5 inches from the back board, the other 3 inches from the front.

Under the stairs, a 4 - inch slat was missing.

Not exact matches

Durable and attractive rubberwood construction, wire slats, expandable to 71 inches, stands 20 inches tall, larger version available, rubber feet to prevent movement and protect flooring

Pros: Durable and attractive rubberwood construction, wire slats, expandable to 71 inches, stands 20 inches tall, larger version available, rubber feet to prevent movement and protect flooring

The slats are 4 inches up from the bottom to keep the peppers close enough to the rocks to dry without burning.

Check each night for gaps between your mattress and the wall (if your bed is against a wall), and remove any headboard and footboard that have cutouts or slats more than 2 3/8 inches apart.

Crib slates should have no more than 2 3/8 inches between them (you can use a soda can for this, it should not fit through slats without force).

The slats should be no more than 2 3/8 inches apart because baby's head could easily slip into the slats and get stuck.

The slats shouldn't be more than 2 3/8 inches apart.

Slats no more than 3 inches apart: If the gate has vertical slats, Consumer Reports recommends that they be no more than 3 inches aSlats no more than 3 inches apart: If the gate has vertical slats, Consumer Reports recommends that they be no more than 3 inches aslats, Consumer Reports recommends that they be no more than 3 inches apart.

The safety standards for cribs now require that the slats be close enough together (2 3/8 inches or less) so that a baby's head could not get wedged between them.

The mattress should be flat and firm, and if there are any slats on the side of the bed, there should not be more than 2 and 3/8 of an inch between them.

You have a «fit through» hazard if your stair balusters are greater than three inches apart allowing your baby or toddler to fit through the slats and fall or become entrapped.

If you buy a used crib, make sure that the slats are no further apart than 2 3/8 inches because anything greater than that can trap a baby's head in it.

- Slats in the crib's sides should be no more than 2 and 3/8 inches apart (to stop your baby's head getting trapped!)

Slat of crib should be 2 3/8 inches so -LSB-...]

Also, the slats on the crib should be no more than 23 ⁄ 8 inches apart.

-- Has slats not greater than 2 ⅜ inches apart (the dimension of a soft drink could) to avoid infant's head from being embeded between.

When choosing your gate, keep in mind that the safety slats should be less than 3 inches apart.

Slats should be less than 3 inches apart, and all should have a Juvenile Products Manufacturers Association approval rating.

In the case of playpens with wood slats, the slats should be no more than 2 3/8 inches apart to prevent your baby from becoming caught between the slats, according to Healthy Children.

Be sure that slats are no more than 2 3/8 inches apart and that the side either does not drop or has been equipped with a no - drop converter kit.

Ensure that the width between crib slats is not more than 2 3/8 inches, when lowered drop sides are at least 9 inches above the mattress support, when raised the drop sides need to be at least 26 inches above the mattress support.

Slats are a maximum of two and three - eighth inches apart for safe bumping.

The crib slats are no more than two and three eighths (2 3/8) inches apart to prevent your baby's body from slipping through.

Also, these mattresses are heavier so they require a supportive foundation with slats no more than 2 inches apart.

A mandatory safety standard requires that crib slats be no more than 2 3/8 inches apart.

Before you use it, look thoroughly for loose screws or missing parts, and be sure the slats are no more than 2 3/8 inches apart.

However, the width of slats is important — they should be less than 3 inches apart.

The slats shouldn't be more than 2-3/8 inches apart (about the width of a soda can) so your baby can't get her head stuck in them.

If your baby's bed has slats, they should be no more than 2 3/8 inches apart, so your baby's head can't fit between them.

To prevent your child's head from getting caught between the bars, make sure crib slats are no more than 2 3/8 inches apart.

Several residents complained that a bridge used to enter the park was in disrepair, and toddlers had gotten their feet stuck in the 6 - inch gaps between the slats.

Slats should be no more than 2 3/8 inches apart (about the size of a soda can) to prevent a baby's head from getting suck.

If you buy a used crib, look for a sturdy crib with slats that aren't too far apart — no more than 2 3/8 inches (about the size of a soda can).

A crib, bassinet, portable crib, or play yard that conforms to the safety standards of the Consumer Product Safety Commission (CPSC), including those for slat spacing less than 2-3/8 inches, snugly fitting and firm mattresses, and no drop sides, is recommended.21 In addition, parents and providers should check to make sure that the product has not been recalled.

Check that the crib slats are no more than 2 3/8 inches apart.

Measure the crib slats to ensure they are not spaced more than 2 3/8 inches apart, which presents an entrapment hazard.

As a rule of thumb slats should be no more 2 3/8 inches.

Vertical slats should be less than 2 3/8 inches apart to avoid the baby getting his or her head stuck in the slats.

The slats for such gaits should be no greater than 3 1/2 inches between two slats so baby doesn't get his head stuck in the slats.

They don't have slats, so you don't have to worry about loose slats or the distance between slats; however, make sure no holes are in the mesh and that the mesh is less than 1/4 inch in size.

When you buy a used crib, make sure the slats aren't any further apart than 2 3/8 inches.

If your co-sleeper has slats, they should be no more than 2 3/8 inches apart.

The slats should be no more than 2 3/8 inches apart, and the corner posts should not stick up more than 1/16 of an inch above the sides of the crib, unless the crib has canopy posts that are 16 inches or taller.

Make sure there are no loosened snaps or buttons on baby clothing and make sure any crib you get is up to code with slats no further apart than 2 3/8 inches.

The slats should be no more than 2 3/8 inches apart and the mattress should fit tightly in the frame.