Sentences with phrase «inch stainless»

The 30 - inch stainless steel refrigerator pull is the perfect choice if you're looking for a long, sleek, contemporary style for your refrigerator.
I went with the 30 inch stainless sink by Kraus.
Check that the board is attached with 1/2 - inch stainless or galvanized steel lag screws and bolts.
From there, the spent exhaust gases flow through aftermarket catalytic converters before traveling through a full 3 - inch stainless - steel exhaust system fit with high - flow stainless - steel mufflers.
The 3 - inch stainless exhaust routes around the fuel tank and dumps behind the rear axle.
We drilled and tapped the frame for the 3 / 8 - inch stainless steel securing stud.
Other highlights include Dynotech 3.0 - inch steel driveshaft, Borla 2.5 - inch stainless steel mandrel bent exhaust, Currie 9 - inch LSD center section, 3.89 ratio, Wilwood four - wheel disc brakes with six - piston front, four - piston rear calipers; slotted, ventilated rotors, double - wishbone front suspension and three - link rear with torque arm and Panhard rod.
In addition to the exhaust, David had fabricator Tom Coholich build the 16 - gauge stainless steel running boards and 1 / 8 - inch stainless bumper that set the rig apart from virtually everything else out there.
ARK also provided the cat - back exhaust, and Vband added the 3 - inch stainless downpipe.
Finally, engine exhaust is funneled quickly away from the aluminum engine using a set of Good Fab stainless - steel exhaust headers and a custom - made 3 - inch stainless - steel exhaust system with 40 - Series Flowmaster mufflers.
There's also Grid Off - Road 20 × 10 inch wheels, Raptor Retrofit headlights, and a Retrax power roll tonneau, as well as a Whipple supercharger, FabTech 6 - inch performance suspension system with dirt logic, and CGS Performance 3 - inch stainless cat - back exhaust.
To achieve the increased numbers, there is a new Borg Warner turbocharger, a 2.5 - inch stainless full - flow exhaust system with 3.5 - inch tail pipes, a new intercooler, and revised ECU programming.
I used a 10 inch stainless steel skillet.
Heat a 12 - inch stainless steel skillet on medium high heat.
Heat a 10 - inch stainless steel skillet or cast iron skillet over medium - low heat.
The deal across the board includes an ABS showerhead with chrome finish, a 60 - inch stainless steel hose, and a two - way water diverter.
It has a 4 - inch stainless steel blade, 5» G10 CNC handle for a 9 inch overall length.
It comes with a 9 - inch stainless steel blade with reverse serration.
This knife features a 4 - inch stainless steel blade covered in a titanium - gold finish.
This fixed blade knife is 12 inches long with a 7 inch stainless steel blade.
Now Harris is healthy («Bionic,» he adds, referring to the six - inch stainless steel plate in his shoulder) and back in the starting lineup with Salaam, though there is no doubt which player is the team's primary rusher.
The cooking grates are 0.312 inch stainless steel rods.
The «Advantage» model has a 970 square inch cooking area and uses 0.312 inch stainless steel rods for the grates.
My go - to pan for cooking a single steak is the KitchenAid ® 8 - inch stainless steel sauté pan.
Yes I have a 12 inch stainless steel pan, a local brand so it's not familiar but what is important is that is good quality stainless steel with double bottom..
On stovetop, preheat 10 - 12 inch stainless steel skillet on medium high heat for 2 - 3 minutes.

Not exact matches

Chris took what appeared to be a stainless steel toothpick and deftly moved small bits of vegetable an eight of an inch here, an eight of an inch there... until, satisfied, he placed it on the shelf for a server.
The best pan for this, by the way, is Viking Range Cookware - their 11 inch, non stick or stainless frypans.
Place a large stainless steel bowl over a sauce pan with about an inch of simmering water.
In a 12 - inch cast iron skillet (or other heavy, stainless skillet), fry the bacon until crisp.
For this recipe I use a large aluminum or stainless steel sheet pan (actually called a half sheet pan) that is 18 ″ X 13 ″, with a 1 - inch lip.
I'm happy to team up with American Kitchen for this post and use their gorgeous stainless steel 10 - inch Premium Non-Stick Casserole Pan.
One example is the stainless steel rack that lifts cooked pizzas approximately 1 / 4 - inch above the serving pan so the juices drip down and keep the crust crisp instead of allowing it to get soggy.
... that's why I prefer the double boiler... It is very easy to improvise a double boiler, use a small pot with 1 inch of water on the bottom and place a bigger diameter glass pyrex bowl, or a stainless mixing bowl on the top.
Place the chocolate in a large stainless steel bowl and set on a sauce pan containing 1 inch of simmering water.
The 1 - inch thick polished steel griddle plate helps retain and distribute heat and the front plate and frame is constructed of insulated double - walled stainless steel for durability, longer life and heating efficiency.
The «Pro» model, also available as a built - in or cart model using either 304 or 430 stainless steel has an 18 - pound hopper (two nine - pound hoppers) and a 562 - inch cooking surface that is expandable to 834 square inches.
The stainless steel grate measures 600 square inches.
The brushed stainless steel unit features an extra-deep well for 1 - inch - thick waffles that are crispy on the outside and light and fluffy on the inside.
Each stainless steel water bottle is 10 1/2 inches tall, holds up to 25 ounces of liquid and is fully reusable so you can drink responsibly.
The 440 stainless steel blade is 5.5 inches long.
The blade is 3.6 inches, and it is made from partially - serrated stainless steel.
It features a 3.25 - inch blade that is partially serrated and made from a heavy stainless steel.
The handle is 4 inches long, made of stainless steel and covered with bright and shiny chrome.
The blade is 3.5 inches long, and it is made from stainless steel.
It is a thick, 7 - inch dagger blade made from stainless steel with a black oxide finish.
The knife is 12 inches in length overall, and it is made with a stainless steel, saw back blade.
The knife is 12.5 inches long with a thick, black, titanium - coated blade made from stainless steel.
The knife is 7.5 inches overall and features a 4 - inch blade made from stainless steel with a black finish.
The blue, stainless steel handle features a 3D - sculpted dragon, and the blade is a 4 - inch, blue, stainless steel with dragon scale details etched into it.
a b c d e f g h i j k l m n o p q r s t u v w x y z