Sentences with phrase «increasing peak output»

This same 4.6 - liter Tau V8 engine was already significantly improved for 2010 with induction and tuning enhancements increasing peak output from 375 to 385 horsepower.

The twin - turbocharged 3.6 L flat - six was optioned with the X50 Turbo Power package, which increased peak output to 444 horsepower through the addition of larger K24 turbos and increased intercooler capacity.

It offered double valve timing chains to fix the easily snapping single chains on early 2.3 engines, and increased peak output by 17 bhp (12.5 kW) with a slight increase in torque.

Not exact matches

The Bretton Woods institution projected that Ghana's oil revenue will peak in 2023 and decline thereafter, stating that «a projected increase in oil output would boost Ghana's domestic revenue over the medium term «but this effect will likely be short - lived.»

Increasing value of prediction One way to overcome energy output challenges is to anticipate peaks and valleys in wind electricity production.

Enoka (1988) explored hip, knee and ankle joint power outputs in competitive weightlifters during the first pull and transition phases and reported that joint peak power output did not alter with increasing load at the hip, knee or ankle.

Peak force and peak power output increase with increasing load, but RFD does Peak force and peak power output increase with increasing load, but RFD does peak power output increase with increasing load, but RFD does not.

Assessing the effect of training variables, Pearson et al. (2009) explored the effect of different relatives loads between 10 % — 100 % and found that mean power output increased to a peak at 50 % of 1RM before reducing to its minimum at 100 % of 1RM.

Comparing the effect of training variables, Clark et al. (2008) found that peak force output increased with greater relative load between 55 % and 80 % of 1RM performed on a smith machine using the Plyobrake system.

Comparing the effects of different training variables, Swinton et al. (2011a) explored the effects of relative load between 10 — 80 % of 1RM and found that power outputs increased to a peak at 30 % of 1RM for straight bar deadlifts and to a peak at 40 % of 1RM hexagonal bar deadlifts, before reducing to a minimum at 80 % of 1RM.

BMW says that battery cell capacity has increased from 20 to 34 ampere hours and gross energy capacity from 7.1 to 11.6 kilowatt hours, which helps raise the electric motor's peak output to 184 lb - ft of torque.

Compared with last year's Lamborghini Gallardo LP570 - 4 Superleggera, the maximum power output has increased from 561 to 602 hp, peak torque is up by a relatively modest 15 lb - ft, and the 0 - to -62-mph acceleration time has improved by 0.2 second, to 3.2 seconds.

The net result of all these changes is an engine redline that has been raised by 500 rpm to 7500 rpm and an increase in power output from 412 hp to 440 hp at 7500 rpm - at a cost of 10 lb - ft of peak torque, with the Boss 302's V - 8 rated at 380 lb - ft at 4500 rpm.

Powered by a high - output version of the Twin Power Turbo in - line six - cylinder engine with twin low - mass turbochargers and high precision direct injection, output is increased to 335 hp with a peak torque of 332 lb - ft, allowing the 35is to sprint to 100 km / h in just 4.7 seconds.

Under the hood of the all - new BMW M5 is the latest and most advanced version of the renowned 4.4 - liter V8 engine featuring M TwinPower Turbo technology with an output increase from the previous generation of 40 hp and 53 lb - ft, this new engine develops 600 hp and 553 lb - ft of peak torque to promise explosive acceleration and formidable performance.

All these updates, along with a new exhaust system with upgraded manifolds, sport catalysts and titanium Akrapovic muffler, have increased the engine's output to a total of 720 horsepower and a peak torque of 626 pound - feet.

Maximum output is 155 kW / 211 hp, peak torque 260 Newton - metres / 192 lb - ft increasing through the Overboost function for a short while to an even more substantial 280 Newton - metres / 206 lb - ft.

Maximum output is 155 kW all the way from 1,850 — 5,600 rpm, with peak torque of 260 Newton - metres, increasing in Overboost mode to 280 Newton - metres.

Peak output of 205 horsepower1 arrives 1300 rpm lower in the rev range, and the greatly increased peak torque of 192 lb - ft2 (+18 lb - ft) is produced 2300 rpm earlier and sustained over 70 percent of the rev raPeak output of 205 horsepower1 arrives 1300 rpm lower in the rev range, and the greatly increased peak torque of 192 lb - ft2 (+18 lb - ft) is produced 2300 rpm earlier and sustained over 70 percent of the rev rapeak torque of 192 lb - ft2 (+18 lb - ft) is produced 2300 rpm earlier and sustained over 70 percent of the rev range.

Both power and torque have increased - making it one of the most powerful cars ever produced by BMW - with peak power output standing at 600hp (560hp in the standard BMW M5) and torque output reaching 700Nm (680Nm in the standard BMW M5).

Peak boost increases to 17.5 psi, compared to 12.3 psi in the S7 engine, and peak output increases accordingly: 552 bhp (SAE rating pending) and 516 lb - ft of torque, from 420 and 406 in thePeak boost increases to 17.5 psi, compared to 12.3 psi in the S7 engine, and peak output increases accordingly: 552 bhp (SAE rating pending) and 516 lb - ft of torque, from 420 and 406 in thepeak output increases accordingly: 552 bhp (SAE rating pending) and 516 lb - ft of torque, from 420 and 406 in the S7.

The result of the 2017 Accord Hybrid's cutting - edge powertrain technology is a fun - to - drive character, aided by the new Sport mode and an 8.2 % increase in total system power to 212 horsepower (as measured by the peak, concurrent output of the two electric motors and gas engine).

Peak power has been increased by 50bhp to 711bhp, while torque output is up by 10Nm, at 770Nm.

Despite a 10 per cent increase in engine output and a 30 per cent jump in peak torque — to 680Nm (502 lb - ft)-- fuel consumption and CO2 emissions have been reduced by over 30 per cent in both cases compared with their respective predecessors.

Under the hood the car keeps the usual 3.7 - liter V - 6 engine, but output has been increased from the previous 328 horsepower up to 344 horsepower, while peak torque goes from 267 to 273 pound - feet of torque.

For the 3.0 liter turbocharged engine, Hartge is offering a tweaked ECU and stainless steel rear silencer with dual round tail pipes that will increase the output from the standard 340 HP to an impressive 401 HP at 5,850 rpm and a peak torque of 391 lb - ft at 2,950 rpm.

SRT engineers increased the HEMI ®'s peak power output engine speed nearly 20 percent to 6000 rpm from 5000 rpm.

The Supercopa is powered by the same engine as found in the Leon Cupra R - a 2.0 liter TSI engine - but its output has been increased to 301 HP with a peak torque of 250 lbs - ft.

The LS3 power output is 317 kW (431 PS; 425 hp), whilst peak torque has not increased over the LS2.

BMW EfficientDynamics engineering increases engine output by 35 horsepower and peak torque by 32 lb - ft over its predecessor — but you'll really feel the difference when pushing from 0 - 60 mph in 5.1 seconds.4

Not only is the new model substantially more affordable, it benefits from a new four cylinder TwinPower Turbo engine that increases power and torque over its predecessor's 2.5 - litre six cylinder engine by 20kW and 100Nm to peak outputs of 180kW / 350Nm.

The increase in displacement has in turn helped increase the maximum power output from 71PS to 75PS and peak torque output from 160Nm to 190Nm - this makes the car very easy to drive, especially in town.

Compared to the previous 3.5 - litre engine, the output has been boosted by 16 percent to 232 kW / 316 hp (at 6500 rpm), while the peak torque has been increased by 10 Nm and now stands at 360 Nm.

The 4.7 litre V8 engine has a power output of 420bhp (an 11 % increase on the previous 4.3 litre unit) and delivers peak torque of 470Nm (15 % increase), providing the Aston Martin V8 Vantage with new reserves of mid-range performance, an improved 0 - 60mph time of 4.7 seconds and top speed of 180mph (288kph).

However, peak oil means a double whammy — it reducec GHG emissions from oil, however, there is the danger, that we switch to coal - to - liquids, gas - to - liquids, tar sands and oil shales, just because increases in energy efficiency, solar and wind output are not enough to counter population increase, decrease in oil availability, and increase in total energy consumption...

It is very possible (probable in fact) that we will face a peak in conventional oil output with a simultaneous increase in total liquid fuel availability.

Modeling has also shown that it's relatively inexpensive to increase the reliability of the total wind output to a level equivalent to a coal - fired power station by adding a few low - cost peak - load gas turbines that are opearated infrequently, to fill in the gaps when the wind farm production is low (Diesendorf 2010).

3) Even allowing that you are interested in the period from 1910 - 1945, peak solar output increased far more over that period than did minimum solar output.

The CPUC would be required to increase the percentage of electricity output delivered by clean resources by 5 % in 2020 and by 6 % «every third year thereafter until December 31, 2029, or until 40 % of demand during the peak load time period is supplied by clean peak resources,» the bill reads.

China promised its emissions would peak by 2030, while India said it would reduce the amount of carbon emitted for every dollar of economic output, but its emissions would continue to increase.

Elsewhere, they note, «if society aims to increase output of (say) wind energy with the least energetic investment, it is better in many cases to just build another wind turbine, or possibly transmission lines, than to build a battery to store power that arrives at off - peak times.»