Sentences with phrase «into pairing mode»

Bluetooth pairing isn't hard at all, since the Elite Sport go into pairing mode right away.

(There's also a button inside the case which you can use to force the Buds into pairing mode.)

On iOS devices, you put the speaker into pairing mode by pressing the Pairing button and finding SONY: SRS - X2 under Other Devices on the Bluetooth Settings screen.

If you have paired them to a phone or another device before and maybe upgraded your phone or did a factory reset and need to pair them again, just press the button on the right earbud until it turns on then keep pressing it until it goes into pairing mode.

Below the button are five white indicator lights to both show battery level when the headphones turn on and slowly pulse when put into pairing mode.

Pressing and holding the small button on the bottom of the right ear cup turns the headphones on and, if held for an extra second, puts the headphones into pairing mode.

Turning the Sport Coach on puts them into pairing mode, and within seconds we were set up with an iPhone (we also paired with an LG G4).

After installation, just tap the power button to put the Trackpad into pairing mode and your Mac will see it through the default Bluetooth setup wizard.

I like that over putting the doorbell into a pairing mode and then praying Wifi Direct actually works, because Wifi Direction often doesn't actually work on the first try.

To put it into pairing mode, you press the Bluetooth button on left side of the speaker and then find «Pocket Kick» on your mobile device's list of Bluetooth devices.

Once charged, the Earin buds automatically spring to life and go into pairing mode.

It automatically went into pairing mode the first time I turned it on, and connected to my Google Nexus 6P quickly.

To pair your DualShock 4 to your PC over Bluetooth, you need to turn the controller off and force it into pairing mode.

After you plug the Hub into a wall outlet and put it into pairing mode by pressing a button on the device, the app detects it and collects the info needed to connect it to your Wi - Fi network.

Now your Harmony Hub will go into pairing mode.

This means, Alexa is putting a Bluetooth device into pairing mode.

You'll have to put that Bluetooth speaker into pairing mode, then you simply follow the instructions in the app.

Opening the lid and holding down on the earbud case's single button, the system is placed into pairing mode when the LED turns white.

The first time I turned on the 4.50 BTNC headphones, they automatically launched into pairing mode and took only a moment to connect to my Samsung Galaxy S7.

The first time I turned on the 4.50 BTNC headphones, they automatically launched into pairing mode and took only a moment to connect to my

Just pressing a single button on the M4 sets it into pairing mode, or if your smartphone or tablet supports NFC technology you just need to hold your device near to the M4 for a wireless connection to be forged.

To force the AirPods into pairing mode for use with any non-Apple device, a small, nearly invisible button on the back of the charging case will force pairing mode when held down.

With your sensors in place, you'll put the keypad into pairing mode, then pair everything up by pressing a button on each sensor, then giving it a name on the keypad.

Once they selected this option they can enter the Home into pairing mode and then head over to their phone's Bluetooth settings to add it, just like they would any other speaker.

To put it into pairing mode, you hold down the Bluetooth button until you hear the speaker say, «Ready to pair.»

Just hold the button on each bud for a couple of seconds to turn them on, and then keep holding to put them into pairing mode.

One you remove the earphones from their case, you simply hold down both touch surfaces to put the Beoplay E8 into pairing mode, and then just select them from your device.

Then, turn on your Bluetooth keyboard and put it into pairing mode.

To put the speaker into pairing mode, you press the Bluetooth button until the indicator light blinks blue and red.

Connecting your controllers via 8Bitdo's adapter is dead simple — you just press the pairing button on the adapter, put your controller of choice into pairing mode, and the two sync up.

Once the device enters into pairing mode, it will appear under «Other devices», as seen below.

First, put your Bluetooth speaker or adapter into pairing mode.

Just like the process with which each light is put into pairing mode, one click activates one mode, two clicks activates another.

The A7908 paired easily with both iOS and Android devices, but putting it into pairing mode can require some work.

Taking the VerveOnes out of the case automatically enters them into pairing mode, which I kind of like.

The speaker only goes into pairing mode if you turn it on and it can't find the device with which it was previously paired; in other words, if you pair it with your phone, then want to pair it with your tablet, you have to turn off your phone's Bluetooth to put the Anker back into pairing mode.

The only solution is to open settings on the iPad, «forget» the Folio, turn off Bluetooth, turn off the Folio then turn on the folio and put it into pairing mode, turn on Bluetooth on the iPad, chose the Zagg Folio and pair it.

Typically your controller will be put into pairing mode either by pressing a dedicated pairing button (often times hidden under the battery compartment or a small out of the way button at the top of the controller) or you'll hold down the home / menu button.

Start controller pairing on my FTV Put DS4 into pairing mode (light bar blinks to indicate pairing) FTV sees controller Select controller with FTV remote to start pair DS4 goes OUT of pairing mode (almost as if it did pair successfully) and LED blinks slowly a few times, then turns off Turning DS4 back on causes the LED to flash white a few times then turn off again.

When I go into pairing mode, it just doesn't find the keyboard, to my mild annoyance.

You can put it into pairing mode and pair it with an Android smartphone or tablet, just like you could pair it with a PC.

If you have a wireless Bluetooth controller, you can pair it with your Android device by putting the controller into pairing mode.

The Elite Sport immediately went into pairing mode once we turned them on, with voice prompts guiding us step - by - step.

Just hold down the «Share» and «PlayStation» buttons on the controller until the light bar starts flashing to put it into pairing mode.

Just put the controller into pairing mode, open the Settings app on your iPhone or iPad, and select Bluetooth.

Pairing the speaker to your device is usually a challenge, but surprisingly the B2 went into pairing mode upon being plugged in for the first time.

This will enter the controller into pairing mode.

The button marked R / T puts the X3 into pairing mode, and we had no problems getting connected.

Not exact matches

Pair the flat recline with the included foot muff to transform the Book Plus into carriage mode.

Each Fall I get into monochrome mode so I paired this dress with Sole Society heels and quilted clutch.