Sentences with phrase «iron cylinder block»

Based on an iron cylinder block the GT500 engine was topped with free - breathing aluminum four - valve heads and a Roots - type Eaton R122 supercharger.

Technical Data: 4 cylinder in - line engine; iron cylinder block and cylinder head cast in one piece (Bentley 4 1/2 Litre Supercharged engine extensively modified and Amherst Villiers Supercharger system Roots fitted), bore x stroke 100 x 140 mm, capacity 4,398 cc; 4 valves per cylinder, light alloy crankcase, dual ignition by 2 magnetos; cone type clutch, speed gearbox; spiral bevel final drive, suspension by semi-elliptic springs front and rear; 4 - wheel brakes; wheelbase 2,984.5 mm (117,5 in) or 3,302 mm (130 in); tyre size 5.25 x 21 or 5.25 x 31 1/2 or 5.25 x 32 1/2 (Bentley 4 1/2 Litre Supercharged 6 x 21)

Technical Data: 8 cylinder in - line engine; cast iron cylinder block, bore x stroke 88.9 x 114.3 mm (3 1/2 x 4 1/2 in), capacity 5,675 cc; aluminium alloy cylinder head, Stromberg carburettor; single dry plate clutch, 4 - speed gearbox (from 1954 4 - speed automatic gearbox standard); hypoid bevel final drive; independent front suspension with coil springs, semi-elliptic rear springs; drum brakes servo - assisted; wheelbase 3,683 mm (145 in); tyre size 8.00 x 17

It has a cast - iron cylinder block with two balance shafts, one on each side of the block.

Iron cylinder block and aluminum DOHC cylinder head Forged steel crankshaft and connecting rods Oiling circuit that includes a dedicated feed for the turbocharger to provide increased pressure at the turbo and faster oil delivery Piston - cooling oil jets 16.5:1 compression ratio Common rail direct injection fuel system Ceramic glow plugs for shorter heat - up times and higher glow temperatures Balance shaft that contributes to smoothness and drives the oil pump Laminated steel oil pan with upper aluminum section that contributes to engine rigidity and quietness B20 bio-diesel capability.

The 2.7 - liter EcoBoost engine also features Ford's first use of a compacted graphite iron cylinder block in a gasoline engine, the same material used in Ford's 6.7 - liter Power Stroke ® turbo diesel V8 in Super Duty trucks.

Additional engine features: Iron cylinder block and aluminum DOHC cylinder head Forged steel crankshaft and connecting rods Oiling circuit that includes a dedicated feed for the turbocharger to provide increased pressure at the turbo and faster oil delivery Piston - cooling oil jets 16.5:1 compression ratio Common rail direct injection fuel system Ceramic glow plugs for shorter heat - up times and higher glow temperatures Balance shaft that contributes to smoothness and drives the oil pump Laminated steel oil pan with upper aluminum section that contributes to engine rigidity and quietness B20 bio-diesel capability The Duramax 2.8 L is the cleanest diesel truck engine ever produced by General Motors, and meets some of the toughest U.S. emissions standards, thanks in part to a cooled exhaust gas recirculation (EGR) system.

The 2.7 - liter EcoBoost engine features the first use of a compacted graphite iron cylinder block in a gasoline engine, the same material used in Ford's 6.7 - liter Power Stroke turbo - diesel V8 engine.

Technical Data: 6 cylinder in - line engine, cast iron cylinder block, bore x stroke 92.08 x 114.3 mm, capacity 4,566 cc (Continental only: from 1954 bore x stroke 94,62 x 114,3 mm (3 3/4 x 1/2 in), capacity 4,887 cc); aluminium alloy cylinder head, twin SU carburettors; single dry plate clutch, 4 - speed gearbox, 4 - speed automatic gearbox optional; hypoid bevel final drive; independent front suspension with coil springs, semi-elliptic springs rear; drum brakes servo - assisted; wheelbase 3,048 mm (120 in); tyre size 6.50 x 16

Technical Data: 6 cylinder in - line engine, bore x stroke 88.9 x 114.3 mm (3 1/2 x 4 1/2 in), capacity 4,257 cc (from 1951 bore x stroke 92.08 x 114.3 mm (3 5/8 x 4 1/2 in), capacity 4,566 cc; from 1954 bore x stroke 95.25 x 114.3 mm (3 3/4 x 4 1/2 in), capacity 4,887 cc); cast iron cylinder block, aluminium alloy cylinder head, Stromberg carburettor (from 1951 Zenith carburettor, from 1956 twin SU carburettors); single dry plate clutch; 4 - speed gearbox (from 1952 4 - speed automatic gearbox optional), hypoid bevel final drive, independent front suspension with coil springs, semi-elliptic springs rear; drum brakes servo - assisted; wheelbase 3,225.8 mm (127 in)(from 1951 wheelbase 3,378.2 mm (133 in); tyre size 6.50 x 17 (from 1951 tyre size 6.50 x 16, for export cars tyre size 7.50 x 16 optional, for long wheelbase cars standard);

Technical Data: 6 cylinder in - line configuration, cast iron cylinder block, bore x stroke 95.25 x 114.3 mm (3 3/4 x 4 1/2 in), capacity 4,887 cc; aluminium alloy cylinder head; twin SU carburettors type HD6 (from 1957 twin SU carburettors type HD8 on cars for North America, from 1957 standard on all models); 4 - speed automatic gearbox (manual 4 - speed gearbox to special order); hypoid bevel final drive; independent front suspension with coil springs, semi-elliptic springs rear; drum brakes servo - assisted; wheelbase 3,124.2 mm (from 1957 long wheelbase 3,225.8 mm available); tyre size 8.20 x15 (Bentley S1 Continental 7.60 x 15 or 8.00 x 15).

Technical Data: 6 cylinder in - line engine, cast iron cylinder block, bore x stroke 88.9 x 114.3 mm (3 1/2 x 4 1/2 in), capacity 4,257 cc; cast iron cylinder head, overhead valves; aluminium alloy crankcase (Bentley Corniche cylinder block and crankcase cast in one piece, overhead inlet valves, side exhaust valves) single coil ignition, stand - by coil, 2 SU - carburettors; single dry plate clutch, 4 - speed gearbox, synchromesh on 2nd, 3rd and 4th gear; hypoid bevel final drive; independent front suspension with coil springs, semi-elliptic springs rear; 4 - wheel drum brakes servo - assisted; wheelbase 3,149.6 mm (124 in); tyre size 6.50 16

Technical Data: 6 cylinder in - line engine, cast iron cylinder block, bore x stroke 88.9 x 114.3 mm (3 1/2 x 4 1/2 in), capacity 4,257 (from 1951 bore x stroke 92,08 x 114,3 mm (3 5/8 x 4 1/2 in) capacity 4,566 cc), aluminium alloy cylinder head, Stromberg carburettor (from 1951 Zenith carburettor); single dry plate clutch; 4 - speed gearbox (from 1952 4 - speed automatic gearbox optional, from 1953 standard), hypoid bevel final drive; independent front suspension with coil springs, semi elliptic springs rear; drum brakes servo - assisted, wheelbase 3,048 mm (120 in); tyre size 6.50 x 16;

Technical Data: 6 cylinder in - line configuration, cast iron cylinder block, bore x stroke 95.25 x 114.3 mm (3 3/4 x 4 1/2 in), capacity 4,887 cc; aluminium alloy cylinder head; twin SU carburettors type HD6 (from 1957 twin SU carburettors type HD8 on cars for North America export, from 1957 standard on all models); 4 - speed automatic gearbox (manual 4 - speed gearbox to special order); hypoid bevel final drive independent front suspension with coil springs, semi-elliptic springs rear; drum brakes servo - assisted; wheelbase 3,124.2 mm (from 1957 long wheelbase 3,225.8 mm available); tyre size 8.20 x15

It is completed by the ZZ427, a regular - production crate engine that features most of the same high - performance attributes of the Anniversary 427, but with an iron cylinder block.

The 2JZ is a simple sort of a straight 6 cylinder motor with a hard cast iron cylinder block and 3 liter displacement.

The L88 427 was the ultimate expression of Chevy's production Big - Block power, combining a rigid iron cylinder block with lightweight aluminum cylinder heads.

The 2.8 - liter turbodiesel truck engine sports an iron cylinder block with an aluminum dual - overhead cam head, forged steel crankshaft and connecting rods, a common rail direct injection fuel system, and a balance shaft to run the oil pump and increase smoothness.

Not exact matches

Aluminum engine blocks now require cast - iron cylinder liners, for sufficient wear resistance, but C4 liners will wear better, yet transfer heat far better than a ceramic liner», says Breslin.

Even aluminum blocks have cast iron cylinder liners.

To accommodate those big, free - breathing valves while preserving the 100 mm cylinder - bore spacing that allows this all new block to be machined alongside the 5.0 - liter in Windsor, Ontario (the deck height is also the same), the bore was increased to 94 mm by eschewing iron liners in favor of a plasma - transferred wire - arc cylinder liner technology.

360 - horsepower, 6.0 - liter V - 8 with 380 pounds - feet of torque, iron block / aluminum cylinder head and two valves per cylinder

Engine Type: Small - block Displacement: 409 ci Compression Ratio: 10:1 Bore: 4.165 inches Stroke: 3.750 inches Cylinder Heads: GM Iron Rotating Assembly: Stock GM Induction: Holley 750 - cfm carburetor, Edelbrock intake manifold, stock air cleaner Ignition: PerTronix distributor, Accel primary wires Exhaust: Dynatech headers, MagnaFlow mufflers Built By: The Restomod Shop

302 - hp, 4.8 - liter V - 8 with iron block and aluminum cylinder heads, cam - in - block, two valves per cylinder and 305 pounds - feet of torque

195 - horsepower, 4.3 - liter V - 6 with iron block and cylinder heads, cam - in - block, two valves per cylinder and 260 pounds - feet of torque

365 - hp, 6.6 - liter diesel V - 8 with 660 pounds - feet of torque, iron block and aluminum cylinder head and four valves per cylinder

365 - hp, 6.6 - liter diesel V - 8 with 660 pounds - feet of torque, iron block / aluminum cylinder head and four valves per cylinder

Audi has stuck with a cast - iron block, but has introduced a special lightweight aluminium - silicone cylinder head.

The cylinder head is high - density aluminum to reduce weight and the block is iron to withstand pressure, control vibration and noise, and reduce size.

Like previous Evos, the unit was still a 2 - litre, turbocharged inline four, but the cylinder block was cast aluminium rather than cast iron.

Cylinders are cast into an engine block formed of cast iron or aluminum and then bored and drilled to the final bore diameter

With cast iron block and aluminium cylinder head, the Mercedes introduces steel pistons for a passenger diesel, for the first time.

Part Number: 19260835 Engine Type: LS - Series Small - Block V - 8 Displacement (cu in): 454 cu in (7.4 L) Bore x Stroke (in): 4.185 x 4.125 (106.3 x 104.8 mm) Block (P / N 19244057): LSX cast iron with 6 - bolt cylinder head attachment Crankshaft (P / N 19244018): 4340 forged steel Connecting Rods (P / N 19166964): 4340 forged steel Pistons: (P / N 19166958): 4032 forged aluminum Camshaft Type (P / N 19166975): Mechanical roller Camshaft Lift (in):.738 intake /.738 exhaust Camshaft Duration (@.050 in): 250 ° intake / 270 ° exhaust Cylinder Heads (P / N 19166979): Drag race cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: cylinder head attachment Crankshaft (P / N 19244018): 4340 forged steel Connecting Rods (P / N 19166964): 4340 forged steel Pistons: (P / N 19166958): 4032 forged aluminum Camshaft Type (P / N 19166975): Mechanical roller Camshaft Lift (in):.738 intake /.738 exhaust Camshaft Duration (@.050 in): 250 ° intake / 270 ° exhaust Cylinder Heads (P / N 19166979): Drag race cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: Cylinder Heads (P / N 19166979): Drag race cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: Internal

At the same time M52B25 differs from M50B25 with its block of cylinders which were replaced with aluminum ones which are lighter in comparison with cast iron cylinders.

Cylinder block got additional craft iron sleeves which were installed on other camshafts.

Speaking about innovations and new features we should also mention cast iron sleeves in block of cylinders as well as second phase shifter on the Double - VANOS exhaust valve along with 244/228 duration camshafts, new pistons and connecting rods, intake manifold, renewed cooling system and electronic throttle body.

VR38DETT cylinder block has remained aluminium 60 ° V6, as before, but instead of cast - iron liners, plasma coating of low - carbon steel layer is used (0.15 mm thick).

The main differences between EZ36D and EZ30 are as follows: EZ36D uses the strengthened cylinder block, inside of which there are cast - iron sleeves 1.5 mm thick.

The motor was denied in using a cast iron block of cylinders, so they replaced it with a light aluminium block having cast iron sleeves.

The 2.4 - liter I - 4 World Gas Engine is constructed with a high - pressure, die - cast aluminum block with cast - in - place iron liners, sand - cast aluminum ladder frame and aluminum cylinder head.

FB20 cylinder block is aluminum and has open deck, with cast - iron sleeves, cylinder diameter is 84 mm, and piston stroke is 90 mm.

Engine Type: Chevy Small - Block V - 8 Displacement (cu in): 350 Bore x Stroke (in): 4.000 x 3.480 Block (P / N 10105123): Cast - iron with 4 - bolt main caps Crankshaft (P / N 14088526): Nodular iron Connecting Rods (P / N 10108688): Powdered metal steel Pistons (P / N 12514101): Cast - aluminum Camshaft Type (P / N 24502476): Hydraulic flat tappet Camshaft Lift (in):.435 intake /.460 exhaust Camshaft Duration (@.050 in): 212 ° intake / 222 ° exhaust Cylinder Heads (P / N 12558060): Vortec iron; 64cc chambers Valve Size (in): 1.940 intake / 1.500 exhaust Compression Ratio: 9.1 nominal Rocker Arms (P / N 10089648): Stamped steel Rocker Arm Ratio: 1.5:1 Water Pump (P / N 88894341): Cast iron, long - style Flexplate (P / N 14088765): 12.750» Recommended Fuel: 92 octane Ignition Timing: Base 10 ° BTDC, 32 ° Total Maximum Recommended rpm: 5,500 Balanced: External

The 2.7 - liter EcoBoost uses the same compacted graphite iron in its cylinder block as is used in the 6.7 - liter Power Stroke.

It's rated at 430 hp in this new Crate Powertrain kit, offering the lightweight advantage of an aluminum cylinder block, aluminum heads and a composite intake manifold over cast iron engines in early cars.

As is common with aluminum blocks, each cylinder in the engine was lined with cast iron.

V - 8, 16 - valve, variable - valve timing, push rod operated overhead valves, eight deactivating and eight hydraulic lifters w / roller followers, deep - skirt cast - iron block, 356 aluminum cylinder heads w / hemispherical combustion chambers

The Revotorq is the three - cylinder 1.05 - litre turbo - diesel with a cast iron block, aluminium head and four - valve, twin - cam setup.

It has a cast iron engine block with MPFI (fuel injection) and an aluminum SOHC cylinder head with forged steel connecting rods and four valves per cylinder.

Advanced features include a die - cast aluminum block with cast - in iron cylinder liners and aluminum cylinder heads for minimizing vehicle weight.

Features of the diesel engines include a cast - iron block, aluminium alloy cylinder head with double overhead camshafts, 16 - valve layout and a bushes timing chain.