Sentences with phrase «iron cylinder heads»

Some cast iron cylinder heads require pedestal machining.

The engine could move prodigious amounts of air and fuel, thanks to cast - iron cylinder heads with large valves and rectangular ports, a high - lift, solid - lifter camshaft with heavy - duty valve train and a Holley 780 cfm 4 - barrel carburetor on an aluminum intake manifold.

Technical Data: 6 cylinder in - line engine, cast iron cylinder block, bore x stroke 88.9 x 114.3 mm (3 1/2 x 4 1/2 in), capacity 4,257 cc; cast iron cylinder head, overhead valves; aluminium alloy crankcase (Bentley Corniche cylinder block and crankcase cast in one piece, overhead inlet valves, side exhaust valves) single coil ignition, stand - by coil, 2 SU - carburettors; single dry plate clutch, 4 - speed gearbox, synchromesh on 2nd, 3rd and 4th gear; hypoid bevel final drive; independent front suspension with coil springs, semi-elliptic springs rear; 4 - wheel drum brakes servo - assisted; wheelbase 3,149.6 mm (124 in); tyre size 6.50 16

Not exact matches

an added benefit of the lead in the fuel was cooler temperatures at the exhaust valve meaning they could mmachine the exhaust valve seat right out of the existing cast iron of the cylinder head.

The 2.8 - liter turbodiesel truck engine sports an iron cylinder block with an aluminum dual - overhead cam head, forged steel crankshaft and connecting rods, a common rail direct injection fuel system, and a balance shaft to run the oil pump and increase smoothness.

360 - horsepower, 6.0 - liter V - 8 with 380 pounds - feet of torque, iron block / aluminum cylinder head and two valves per cylinder

Engine Type: Small - block Displacement: 409 ci Compression Ratio: 10:1 Bore: 4.165 inches Stroke: 3.750 inches Cylinder Heads: GM Iron Rotating Assembly: Stock GM Induction: Holley 750 - cfm carburetor, Edelbrock intake manifold, stock air cleaner Ignition: PerTronix distributor, Accel primary wires Exhaust: Dynatech headers, MagnaFlow mufflers Built By: The Restomod Shop

302 - hp, 4.8 - liter V - 8 with iron block and aluminum cylinder heads, cam - in - block, two valves per cylinder and 305 pounds - feet of torque

195 - horsepower, 4.3 - liter V - 6 with iron block and cylinder heads, cam - in - block, two valves per cylinder and 260 pounds - feet of torque

365 - hp, 6.6 - liter diesel V - 8 with 660 pounds - feet of torque, iron block and aluminum cylinder head and four valves per cylinder

365 - hp, 6.6 - liter diesel V - 8 with 660 pounds - feet of torque, iron block / aluminum cylinder head and four valves per cylinder

Audi has stuck with a cast - iron block, but has introduced a special lightweight aluminium - silicone cylinder head.

The cylinder head is high - density aluminum to reduce weight and the block is iron to withstand pressure, control vibration and noise, and reduce size.

With cast iron block and aluminium cylinder head, the Mercedes introduces steel pistons for a passenger diesel, for the first time.

To increase performance, while reducing oil consumption and emissions, the cylinder head inlet ducts have an optimized design, while cylinder liners are made from thin cast - iron.

Part Number: 19260835 Engine Type: LS - Series Small - Block V - 8 Displacement (cu in): 454 cu in (7.4 L) Bore x Stroke (in): 4.185 x 4.125 (106.3 x 104.8 mm) Block (P / N 19244057): LSX cast iron with 6 - bolt cylinder head attachment Crankshaft (P / N 19244018): 4340 forged steel Connecting Rods (P / N 19166964): 4340 forged steel Pistons: (P / N 19166958): 4032 forged aluminum Camshaft Type (P / N 19166975): Mechanical roller Camshaft Lift (in):.738 intake /.738 exhaust Camshaft Duration (@.050 in): 250 ° intake / 270 ° exhaust Cylinder Heads (P / N 19166979): Drag race cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: cylinder head attachment Crankshaft (P / N 19244018): 4340 forged steel Connecting Rods (P / N 19166964): 4340 forged steel Pistons: (P / N 19166958): 4032 forged aluminum Camshaft Type (P / N 19166975): Mechanical roller Camshaft Lift (in):.738 intake /.738 exhaust Camshaft Duration (@.050 in): 250 ° intake / 270 ° exhaust Cylinder Heads (P / N 19166979): Drag race cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: Cylinder Heads (P / N 19166979): Drag race cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: IntHeads (P / N 19166979): Drag race cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: cylinder heads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: Intheads 6 - bolt LSX aluminum Valve size (in): 2.250» x 6.370» intake 1.625» x 6.400» exhaust Compression Ratio: 13.1:1 Rocker Arms (P / N 19201808): Shaft mounted with needle bearing fulcrum and tip Rocker Arm Ratio: 1.9:1 Recommended Fuel: Race fuel (110 octane minimum) Maximum rpm: 7,100 Reluctor Wheel: 58X Balanced: Internal

The L88 427 was the ultimate expression of Chevy's production Big - Block power, combining a rigid iron cylinder block with lightweight aluminum cylinder heads.

The 2.4 - liter I - 4 World Gas Engine is constructed with a high - pressure, die - cast aluminum block with cast - in - place iron liners, sand - cast aluminum ladder frame and aluminum cylinder head.

Engine Type: Chevy Small - Block V - 8 Displacement (cu in): 350 Bore x Stroke (in): 4.000 x 3.480 Block (P / N 10105123): Cast - iron with 4 - bolt main caps Crankshaft (P / N 14088526): Nodular iron Connecting Rods (P / N 10108688): Powdered metal steel Pistons (P / N 12514101): Cast - aluminum Camshaft Type (P / N 24502476): Hydraulic flat tappet Camshaft Lift (in):.435 intake /.460 exhaust Camshaft Duration (@.050 in): 212 ° intake / 222 ° exhaust Cylinder Heads (P / N 12558060): Vortec iron; 64cc chambers Valve Size (in): 1.940 intake / 1.500 exhaust Compression Ratio: 9.1 nominal Rocker Arms (P / N 10089648): Stamped steel Rocker Arm Ratio: 1.5:1 Water Pump (P / N 88894341): Cast iron, long - style Flexplate (P / N 14088765): 12.750» Recommended Fuel: 92 octane Ignition Timing: Base 10 ° BTDC, 32 ° Total Maximum Recommended rpm: 5,500 Balanced: External

It's rated at 430 hp in this new Crate Powertrain kit, offering the lightweight advantage of an aluminum cylinder block, aluminum heads and a composite intake manifold over cast iron engines in early cars.

V - 8, 16 - valve, variable - valve timing, push rod operated overhead valves, eight deactivating and eight hydraulic lifters w / roller followers, deep - skirt cast - iron block, 356 aluminum cylinder heads w / hemispherical combustion chambers

The Revotorq is the three - cylinder 1.05 - litre turbo - diesel with a cast iron block, aluminium head and four - valve, twin - cam setup.

It has a cast iron engine block with MPFI (fuel injection) and an aluminum SOHC cylinder head with forged steel connecting rods and four valves per cylinder.

Advanced features include a die - cast aluminum block with cast - in iron cylinder liners and aluminum cylinder heads for minimizing vehicle weight.

Features of the diesel engines include a cast - iron block, aluminium alloy cylinder head with double overhead camshafts, 16 - valve layout and a bushes timing chain.

The Nu engine features an aluminum block with a cast - iron cylinder liner, cylinder head and crank.

The engine surprisingly utilizes an iron block, though the cylinder head is aluminum.

The majority of the engine — from the cast - iron block to the aluminum - alloy pistons and cylinder head to the valve springs — has been updated.

Both engines featured Dart SHP iron blocks and SHP aluminum cylinder heads.

While the iron block and forged steel crankshaft were sourced directly from the InTech 5.4 L, the Cobra R powerplant benefited from new, high - flow cylinder heads that were designed with features developed for Ford's «Rough Rider» off - road racing program, application specific camshafts with higher lift and more duration than other 4 - valve Modular cams, forged I - beam connecting rods sourced from Carillo, forged pistons that provided a 9.6:1 compression ratio in conjunction with the 52 cc combustion chambers, and a unique high - flow «cross-ram» style aluminum intake manifold.

The engine is based on a block of cast iron cylinders with aluminum 12 - valve cylinder head and one camshaft (SOHC 12V).

Featuring an iron block with aluminium heads, the V8 is effectively a pair of 2.0 - litre four - cylinder engines from the

Featuring an iron block with aluminium heads, the V8 is effectively a pair of 2.0 - litre four - cylinder engines from the A45 AMG on a common crank.

Cylinder block material varies between aluminum used in the 2005 + Mustang GT and cast iron used in the 2005 + Ford Explorer and the 2006 + Ford Explorer Sport Trac (see below), though the same aluminum heads are used in all applications.

With upgraded valve - seat material to fight wear, and anchored by a cast - iron block, aluminum cylinder heads and forged - steel crankshaft, it is little wonder the 6.4 - liter HEMI V - 8 boasts a five - year / 60,000 - mile warranty.

The engine block is comprised of compacted graphite iron like its bigger sibling, the F - Series Super Duty's 6.7 - litre Power Stroke V - 8, with aluminum cylinder heads.

The CT350 is based on our popular 350 HO high - performance street crate engine and features a strong four - bolt - main block, iron Vortec cylinder heads and a unique dual - pattern camshaft.

The iron - block, aluminum - head engine used dual overhead cams and four valves per cylinder; the turbocharger was intercooled with a maximum boost of 11 psi.

There's still a single camshaft in the redesigned cast - iron block bumping pushrods actuating two valves per combustion chamber in aluminum cylinder heads.

The engines also have aluminum heads, with four - valves per cylinder and strong, spheroidal - graphite cast - iron crankshafts and steel connecting rods.

The iron - block, aluminium - cylinder head unit has several innovations, including three tiny pistons with four valves per cylinder, direct fuel injection, a minute turbocharger (from German firm Continental) and a maintenance - free, oil - lubricated camshaft drivebelt.

Engine Structure: Two - stroke, aluminium cylinder head, cast iron block, 4 - bearing crankshaft, water cooled.

Technical Data: 8 cylinder 90 degree V - configuration, aluminium - silicon alloy cylinder block with cast iron wet cylinder liners, bore x stroke 104.14 x 91.44 mm (4.1 x 3.6 in), capacity 6,230 cc, aluminium alloy cylinder heads; 2 SU carburettors; 4 - speed automatic gearbox, hypoid bevel final drive; independent front suspension with coil springs, semi-elliptic springs rear; drum brakes servo - assisted; wheelbase 3,124.2 mm or 3,225.8 mm (123 in or 127 in); tyre size 8.20 x 15

Technical Data: 8 cylinder 90 degree V - configuration, aluminium - silicon alloy cylinder block with cast iron wet cylinder liners; bore x stroke 104.14 x 99.06 mm (4.1 x 3.9 in), capacity 6,750 cc; aluminium alloy cylinder heads, twin SU - carburettors; 3 - speed automatic gearbox; hypoid bevel final drive; independent suspension with coil springs front and rear, hydraulic self - levelling height control rear; ventilated disc brakes front, plain discs rear; wheelbase 3,048 mm (120 in), Rolls - Royce Silver Wraith II 3,149.6 mm (124 in); tyre size 235 / 70HR15

Technical Data: 8 cylinder 90 degree V - configuration, aluminium - silicon alloy cylinder block with cast iron wet cylinder liners, bore x stroke 104.14 x 91.44 mm (4.1 x 3.6 in), capacity 6,230 cc; aluminium alloy cylinder heads, twin SU carburettors; 4 - speed automatic gearbox; hypoid bevel final drive; independent front suspension with coil springs, semi-elliptic springs rear; drum brakes servo - assisted; wheelbase 3,124.2 mm or 3,225.8 mm (123 in or 127 in); tyre size 8.20 x 15 (Bentley S2 Continental 8.00 x 15 broad base)

Technical Data: 8 cylinder 90 degree V - configuration; aluminium - silicon alloy cylinder block with cast iron wet cylinder liners; bore x stroke 104.14 x 99.06 mm (4.1 x 3.9 in), capacity 6,750 cc; aluminium alloy cylinder heads, Zytek EMS3 digital engine management, exhaust driven Garrett AiResearch turbocharger; 4 - speed automatic; independent suspension front and rear with adaptive ride control; ventilated disc brakes front, plain discs rear, anti-locking device; wheelbase 3,161 mm (124.5 in); tyre size 255 / 55WR17; max.

Technical Data: 8 cylinder 90 degree V - configuration, aluminium - silicon alloy cylinder block with cast cylinder 90 degree V - configuration; aluminium - silicon alloy cylinder block with cast iron wet cylinder liners; bore x stroke 104.14 x 99.06 mm (4.1 x 3.9 in), capacity 6,750 cc; aluminium alloy cylinder heads, Bosch Motronic fuel injection and digital ignition, exhaust driven Garrett AiResearch turbocharger; 4 - speed automatic; independent suspension front and rear with adaptive ride control; ventilated disc brakes front, plain discs rear, anti locking device; wheelbase 3,161 mm (124.5 in); tyre size 225 / 65VR15G; max.

Technical Data: 8 cylinder 90 degree V - configuration, aluminium - silicon alloy cylinder block with cast iron wet cylinder liners; bore x stroke 104.14 x 99.06 mm (4.1 x 3.9 in), capacity 6,750 cc, aluminium alloy cylinder heads; 2 SU - carburetors (Bosch fuel injection on export models for North America and Japan, from 1986 Bosch fuel injection standard on all cars); 3 - speed automatic gearbox; hypoid bevel final drive; independent suspension with coil springs front and rear, hydraulic self - levelling height control rear; ventilated disc brakes front, plain discs rear (from 1986 anti-locking brakes for Europe and Middle East); wheelbase 3,061 mm (120.

Technical Data: 8 cylinder 90 degree V - configuration; aluminium - silicon alloy cylinder block with cast iron wet cylinder liners; bore x stroke 104.14 x 99.06 mm (4.1 x 3.9 in), capacity 6,750 cc; aluminium alloy cylinder heads, Zytek EMS3 digital engine management, exhaust driven Garrett AirResearch turbocharger with intercooler; 4 - speed automatic gearbox; independent suspension front and rear with adaptive ride control; ventilated disc brakes front, plain discs rear, anti locking device; wheelbase 3,161 mm (124.5 in); tyre size 255 / 55WR17; max.

Technical Data: 8 cylinder 90 degree V - configuration; aluminium - silicon alloy cylinder block with cast iron wet cylinder liners; bore x stroke 104.14 x 99.06 mm (4.1 x 3.9 in), capacity 6,750 cc; aluminium alloy cylinder heads, digital engine control, turbocharger, 325hp / 242kW; 4 - speed automatic gearbox; independent suspension front and rear with adaptive ride control; disc brakes front and rear, anti locking device; wheelbase 3,061 mm; tyre size 255 / 65R17; max.