From now on, AWEA's Anderson says, the industry will voluntarily program turbines to pivot parallel to the wind on calm nights,
keeping their blades still.
Officers say youths are
keeping blades on them for reasons including «status» and self - protection, as well as crime.
It is also a good way to
keep the blade as sharp as possible.
If you take apart the headpiece you will notice that the corners of the top piece are designed to
keep the blade perfectly aligned in the head.
Blend into a smooth paste, adding a little water, a tablespoon at a time, if necessary to
keep the blades moving.
Allow the grain mill to process the rice into flour, or turn the blender or food processor to high and
keep the blades spinning until a fine powder is produced.
The best shortputters
keep the blade low going back.
Get the sharpest fixed or locking blade you have,
keep the blade pointed * away * from your body (and digits!)
The sheath
keeps the blade held tightly and clips on easily to a belt loop.
Luckily, the knife comes with a scratch - resistant EK sheath to
keep the blade's pattern looking nice.
It comes with a nice sheath that gives you some carrying options and
keeps the blade safe when it's not in use.
It also comes with a safety lock on the blade, which
keeps the blade locked at 0 while it's off.
For example, you will want to use the lower rates on metals and plastics to
keep the blade from heating up too much.
This keeps each blade protected from moisture while they're in the warehouse waiting to be bought.
Speed: Some projects require different speeds for many reasons, including to
keep the blade from getting too hot.
The edges are rounded and it's designed with great ergonomics that
keep the blade steady and comfortable.
«Anything that
keeps the blade moving smoothly across your skin is going to be safer.»
Make sure
you keep the blades of your electric razor clean and get new blades once old ones become dull and if you have a problem shaving your pubic hair with electric razors...
Make sure to empty the sharpener chamber to
keep your blades free and clear of debris.
Keep your blade in the pocket and let your personality do the talking and intuition are in place.
Along with everybody else's suggestions,
Keep the blade sharp.
In doing this, you are putting the tip closer to the windshield and effectively increasing the spring's spring rate which will
keep the blade on the windshield better.
Blade profile
keeps blade firmly on the windshield and promotes quiet operation Steel mono - beam construction provides uniform pressure across the length of the blade and helps eliminate areas for snow or ice to clog the wiper.
They have a patented design feature that
keeps the blade balanced on the windshield to eliminate streaking for good.
She also points out that there are other important issues involved in
keeping blade heat to a minimum.
Making sure to
keep the blades well oiled is key.»
«A small drop of oil while the clipper is running on the teeth of the blade will help
keep the blade sharper longer and help increase the time before the blade gets too warm to use,» Betelak says.
As oil is crucial to keeping friction at bay, it is vital to
keep blades oiled, even after using a spray.
Keep the blades oiled and use caution if they start heating up.
The AQUA FLOW blade rinse will also
keep your blades clean.
yaw mechanism (to
keep the blade assembly perpendicular to the wind; also to untwist the electrical cables in the tower when necessary)-- the nacelle (turbine housing) and blades together weigh 92 tons on a GE 1.5 - MW turbine
Although the weather wasn't ideal for spectators, it did
keep the blades of the city's largest wind turbine turning at a rate of about 48 revolutions per minute.
It also is packing a rather large 3400mAh battery, which should
keep the Blade X Max going all day long.
Try to
keep your blades at least three inches long during the growing season.
Try to
keep the blade just on the inside of the 4 ″ circle so the pots fit tightly.
Not exact matches
One of the main drawbacks of a safety razor, and what makes it slightly less capable of getting a perfect shave when compared to a straight razor, is that the head locks the
blade in place and
keeps only a certain length of the edge exposed.
This greatly minimizes the range of the
blade's angle relative to the surfaces of your face, and while this is an important part of the safety razor design that
keeps it from slicing up your skin, it's also a «one size fits all» solution that is less than ideal.
The challenge faced by the aerospace industry in
keeping track of tens of thousands of different parts came to light when it emerged after last month's fatal explosion that some airlines do not
keep track of the history of each individual fan
blade within an engine.
I
keep the merkur
blades on hand for spares in case I run short of the Wilkinson.
In an article on the Fortune magazine website, Christine Chen and Tim Carvell added «During World War I, Gillette supplied 3.5 million razors and 36 million
blades to U.S. soldiers, creating a base of customers who
kept coming back for refills long after the Treaty of Versailles.»
For instance they can be brought onto a plane flight on carry - on where as DE
blades can't be — and I travel lightly and
keep everything in a carry - on because I hate waiting for luggage to come through that motarized thing (or having it all get lost and going to the wrong place.).
That is why razor
blades, printer cartridges, and other expensive portable items are now
kept under lock and key where you shop.
Where did I go wrong!?!!! Lol very typical me but I had a nightmare making these... I put the almonds in the blender and blended them a little so they were crumbled, but my vitamin didn't even like that (
kept getting stuck all around the
blade).
It's a great choice for slicing things like potatoes because the dimples in the
blade help
keep food from sticking to the knife.
Keep in mind that a blender should only be used in this way once in a while, as the hard rice grains will wear out the
blades.
You can also use a food processor fitted with a steel
blade to do this, but it's hard to
keep the nut meal from turning into nut butter.
You'll need to
keep scraping in between, about every 3 - 5 minutes or when the
blade is not blending anything.
The dough
keep wrapping around the
blade.
And the pecans
kept getting stuck in the Bamex
blade, so that was difficult.
HS: Enjoy them both Kristin, and give the knife &
blade a kiss of mineral oil now and then to
keep them happy.