Sentences with phrase «leaking cylinder head gasket»

Because of problems with a leaking cylinder head gasket, General Motors has extended the powertrain warranty and / or waived the deductible on about 500,000 of its 1987 - 91 cars equipped with the Quad 4 engine.GM boosted the powertrain warranty coverage from 3 years / 50, 000 miles to 6 years / 60, 000 miles on all 1989 - 91 Quad 4 cars.In addition, GM waived the $ 100 deductible on 1987 - 91 Quad 4 vehicles for up to 6 years / 60, 000 miles and said it will reimburse customers who paid the deductible to have the engine repaired.

Because of problems with a leaking cylinder head gasket, General Motors has extended the powertrain warranty and / or waived the deductible on about 500,000 of its 1987 - 91 cars equipped with the Quad 4 engine.

Base on what you've described, it sounds like you may have a leaking cylinder head gasket.

Not exact matches

If you can't see any obvious signs of leaks, or steam coming from anywhere if you run the engine, a likely cause is a cracked cylinder head gasket, which is letting the coolant into the cylinders and out of the tail pipe as steam.

One is at the head gasket where oil can leak across the top of the head to the water passages (or into the cylinder or out the edge of the gasket) if the head isn't properly torqued of perhaps if there is corrosion in the cooling system.

I think a compression / leak - down test on all cylinders would be useful to help you identify if a bad head gasket is to blame here.

The seals on the cam cover gasket and spark plug tubes can and do deteriorate and leak onto the cylinder head exterior.

the head gasket helps seal the cylinder to ensure maximum compression and prevent oil / coolant from leaking into the cylinder.

When an overheating issue is caused by a blown head gasket, the primary failure which occurred causing this is when combustion gasses leak into the coolant passages (usually coolant is leaking into the cylinder at the same time).

is there any sealant to stop engine oil leak to radiator or do I need to replace cylinder - head - gasket?

I had a head gasket leak from the cylinder into the coolant that was pushing coolant out the top of the overflow tank.

A head gasket prevents the gas from leaking between the cylinder head and the engine block.

Your fluctuating coolant temperature may be caused by a cracked cylinder head or leaking head gasket.

If it happens, then there is a high risk that heads of the cylinder block will be deformed and in its turn it will cause leaks through the head gaskets.

New MOT Front bumper (come with soft corners) XS Grill and light surrounds Heavy duty battery Kenwood face off stereo (Original available) Speakers Galvanised chassis 4 x mudflaps 3 x steps Front vent seals Door seals 4 x Terrafirma shocks 4 x 1» lower springs (originals available) Clutch Dual mass flywheel Water Pump Turners cylinder head, head gasket and metal dowels Cold start injectors (plus 4 spares) Injector ring Thermostat Radiator Exhaust manifold Rear discs and calipers Rear exhaust pipe (centre box removed + spare rear pipe) Handbrake pads and oil seal Bonnet catch cable Wiper blades Other Features Headlamp stone guards Defender soft nudgebar with spotlights LR chequer plating KBX wingtop vents Safari snorkel Top tint windscreen Sump guard Factory sunroof (doesn't leak) LR towbar and electrics LR branded Exmoor trim (all 7) + Cubby box and rear seat covers Steel spare wheel with unused matching tyre Spare wheel cover Cooper discovery S / T tyres Rear work light Factory remote alarm + crooklock EGR valve removed (available) Silicone hoses Regular oil and filter changes Service history 7000 miles covered in 4 years High level brake light Good clean headlining Spare items Heated rear window Rear wash wipe Rear fog light Galvanised roofrack Slide open rear windows Diff lock Original jack, owners manual and service book Louise LeJuene spaniel bonnet mascot

That movement, along with corrosion of the head gasket's steel core, may allow coolant to leak into the cylinders.

That engine had a problem with cylinder head bolts breaking, which could cause the head gaskets to leak.

Check Engine Light stays on / Runs rough / cylinders Misfiring / Head Gasket leaking / Blowing White Smoke... Glove box is broken, and left rear window not working.Light Rust. . .

Examples of vacuum leaks include: leaking intake manifold gasket, broken PCV valve or PCV hose, disconnected vacuum line, cracked vacuum line, ripped intake snorkel - faulty fuel injector - damaged engine computer (PCM)- low fuel pressure - leaking head gasket - low compression in the affected cylinder - valves that are out of adjustment - bad mass airflow sensor (random misfire).

Cylinder head and manifold gaskets are covered for coolant leaks only.