Sentences with phrase «liter turbocharged mill»

Base models get a 2.5 - liter boxer making 170 hp, while upgraded models get the company's new 2.0 - liter turbocharged mill making 250 hp.

As far as pretenders go, the 2015 Subaru WRX - STi was generally unimpressive, with a huge winged spoiler on the rear and a 2.5 - liter turbocharged mill, expect tons of turbo - lag, an average boxy appearance, and less than spacious interior.

Just like the new Civic Sedan, the two - door model can be had with either a 2.0 - liter naturally - aspirated four - cylinder engine with 158 horsepower and 138 pound - feet of torque or a 1.5 - liter turbocharged mill with 174 hp and 162 lb - ft of torque.

Mitsubishi gets it right with a zippy 1.5 - liter turbocharged mill under the compact ute's hood.

This 3.0 - liter turbocharged mill makes 320 hp in the M235i, and it's unclear at this point exactly how BMW will extract the 49 extra hp and 54 extra lb - ft of torque that will give the M2 totals of 369 hp and 384 lb - ft.

Not exact matches

That follows the decision for the 2017 Porsche 911 range to move to all - turbocharged engines, starting with twin - turbo 3.0 - and 3.4 - liter units in the Carrera and Carrera S. Porsche hasn't given out any specifics on the new Cayman and Boxster engines, but reports suggest that base versions of the cars will have a 2.0 - liter mill with around 285 hp, while S models will get a 2.5 - liter turbo - four cranking out closer to 360 hp.

Based on that, the new base mill for the new 7 is almost certainly a version of BMW's well - worn turbocharged 3.0 - liter inline - six.

Under the hood of the 2019 Infiniti QX50 will be the first application of the automaker's 2.0 - liter VC - T four - cylinder engine, a turbocharged gas mill with variable a compression ratio.

While the new turbocharged 3.9 liter V - 8 mill in the 488 isn't the first turbocharged V - 8 from Ferrari, it certainly is the most powerful.

While the current Chevrolet Volt uses a 1.4 - liter four - cylinder as a range - extender and generator for the Volt's battery and electric motor, the next Volt could switch to a smaller and lighter turbocharged 1.0 - liter three - cylinder mill.

The new Skyactiv - G 2.5 T is a 2.5 - liter turbocharged four - cylinder mill that is tuned specifically for low - end torque, which peaks with 310 lb - ft at just 2,000 rpm.

The 2.85 - liter twin - turbocharged mill under the rear decklid puts out a strong 444 hp, allowing the all - wheel - drive 959 to crack 60 mph in a still - impressive 3.6 seconds.

As Mazda doesn't currently offer a Skyactiv V - 6 engine, it's possible the CX - 9 will herald the introduction of a turbocharged Skyactiv mill; the 2.5 - liter inline - four used in cars like the 6 sedan and CX - 5 crossover produces only 184 hp, which might not be enough grunt to propel a three - row vehicle.

The current twin - turbocharged 4.0 - liter V - 8 mill develops a whopping 503 horsepower and 516 lb - ft of torque and feels absolutely monumental when you first put your foot down.

It's likely the 2.0 - liter turbocharged four - cylinder currently used in the European market Jaguar XE will soon find its way to the F - Pace, and we'd be surprised that if and when the V - 6 is eventually phased out the rumored Ingenium inline - six mill doesn't fit perfectly under crossover's swelling hood bulge.

That power comes from a familiar mill: A modified version of the S63 4.4 - liter twin - turbocharged V8 that stars in the current M5.

You can choose between either a 2.0 - liter turbocharged four - cylinder version of the X3 (240 horsepower and 260 lb - ft of torque) or a 300 horsepower 3.0 - liter turbocharged six - cylinder mill for 2013 editions of the vehicle, while 2012 X3s feature a 240 horsepower, 3.0 - liter naturally - aspirated six - cylinder in place of the turbo four.

Nissan is replacing the V6 with the previously mentioned 2.0 - liter turbocharged variable compression mill.

For 2017, the Boxster gained the «718» moniker and dropped the naturally aspirated engine in favor of a 2.0 - liter, turbocharged mill that delivers 300 horsepower and 280 pound - feet of torque.

The TTS comes with a 2.0 - liter, turbocharged mill that delivers 310 horsepower and 280 pound - feet of torque (here in the U.S. the TTS Roadster won't even be available... Sigh.)

Using a high - powered variant of the same 2.0 - liter turbocharged engine found in the current Golf, the expert tuners at Volkswagen plan to wring somewhere between 400 and 414 - horsepower from the mill using upgraded turbocharger and intercooler technology.

The Sonic's base 1.8 - liter four - cylinder motor is good for 138 horsepower, but upgrading to the available 1.4 - liter turbocharged four - cylinder mill introduces 148 lb - ft of torque (while maintaining the same number of horses at the crank) along with improved fuel mileage figures of 29 - mpg city and 40 - mpg highway.

The turbocharged 1.6 - liter mill that is also available with the Tucson is good for 175 horses and highway mileage that's a couple mpg better, making it the optimal choice for those willing to spend a bit more money.

In addition to its optional 1.4 - liter, turbocharged four - cylinder engine that delivers 138 horsepower and 38 - mpg on the highway, the Chevrolet Cruze can also be had in a turbodiesel edition that squeezes out 46 highway miles per gallon alongside 151 horsepower and 264 lb - ft of torque from a 2.0 - liter mill.

The first is the new 3.0 Liter turbocharged straight six that makes 306 HP and 295 lb - ft of torque, a 4.4 Liter twin turbo V8 producing 408 HP and a 3.0 Liter turbo diesel mill that makes 245 HP, but we are expecting to see an improvement of at least 30 HP or more from the aftermarket manufacturer.

The base version of the Taurus features a 288 horsepower, 3.5 - liter V - 6 under the hood, but there's also the option of a 2.0 - liter, turbocharged four - cylinder EcoBoost mill that introduces 240 horsepower and 270 lb - ft of twist.

The new 2.0 T splits the difference between most competitors» «small» and «large» engine options so effectively, it appears unlikely that a more powerful mill is in the cards, short of the new S4's turbocharged 3 - liter V6.

The same choice of three powerplant options is likely to be available, which includes a normally - aspirated, 2.5 - liter I4, a 1.6 - liter EcoBoost turbo - four, and a bigger, 2.0 - liter EcoBoost turbocharged mill.

A trio of four - cylinder engine options await 2014 Ford Escape buyers, starting with a 2.5 - liter that's good for 168 horsepower and ranging up past a 178 horsepower, 1.6 - liter turbocharged EcoBoost mill all the way to a 240 horsepower, 2.0 - liter EcoBoost option (also turbocharged).

Though we haven't tested the base, 2.0 - liter turbocharged four - cylinder Stinger, we can't deprive ourselves the GT's high - ouput mill.

The twin - turbocharged 3.8 - liter V8 mill that powers the range - topping Quattroporte fits neatly in the Levante's engine bay, according to Maserati.

Sure, the Volkswagen GTI's 2.0 - liter, turbocharged four - cylinder engine isn't the most potent mill on the market (210 horsepower, 258 lb - ft of torque), but a legion of aftermarket tuners will be all too happy to offer a long list of potential power improvements — and handling upgrades to boot.

All this to help showcase a Civic with an 2.0 - liter turbocharged four - cylinder engine that could get an estimated 280 horsepower, a huge leap from the average run of the mill Civic.

The latest secondhand 3 Series convertibles provide a 3.0 - liter, 230 horsepower six - cylinder base motor, with an upgrade available in the form of a turbocharged 3.0 - liter, six - cylinder mill that ups the ante to 300 horses.

The sDrive28i model is motivated by a 240 horsepower, 2.0 - liter turbocharged four - cylinder engine while the sDrive35i graduates to a 3.0 - liter six - cylinder mill that is turbocharged to produce 300 horsepower and 300 lb - ft of torque.

Although the turbocharged 2.0 - liter 4 - cylinder found in the base model is stout enough, the extra weight of the convertible mechanism almost demands that buyers go for the turbocharged 3.0 - liter 6 - cylinder mill found in the 435i, which brings with it 300 horses.

However, one of the biggest surprises is the availability of Hyundai's first - ever diesel engine in the States, a turbocharged, 2.2 - liter 4 - cylinder mill with an output of 190 hp and 322 lb. - ft.

A single engine denotes the A5 Cabriolet lineup: a turbocharged 2.0 - liter, 4 - cylinder mill that is good for 220 horsepower and 258 lb - ft of torque, output that is handled by either a continuously variable automatic or a traditional 8 - speed automatic transmission.

The newly developed engine, known under the internal codename S55 B30, shares its 84.0 mm bore and 89.6 mm stroke with BMW's standard turbocharged 3.0 - liter in - line six - cylinder direct - injection gasoline mill, the M55 used across the German car maker's lineup, endowing the aluminum block unit with an overall swept volume of 2,979 cc.

The model featured a revised 2.0 - liter turbocharged four - cylinder with a larger air box and bigger intercooler that allowed the mill to make more power and torque than the previous example.

Nothing is official yet but word on the Wolfsburg rumor mill suggests Volkswagen could bring the new Golf to the North American market with a turbocharged 1.8 - liter engine - a measure it first undertook in 2009 when it was unable to build enough Twincharger engines to meet local demand driven by the German government's cash for clunkers program.

There is also a Turbo model with a 1.6 - liter turbocharged four - cylinder mill churning 201 hp and 195 lb - ft of torque, which is more respectable, but still isn't fast enough to match its sporty style.

The Civic Coupe I drove had Honda's new turbocharged, direct injection 1.5 - liter four - cylinder engine, a high - tech little mill good for 174 horsepower and 162 pound - feet of torque.

Power comes from a turbocharged, 0.9 - liter, three - cylinder gasoline engine rated at 85 horsepower and 145 Nm (107 pound - feet) of torque or a 1.3 - liter, four - cylinder, diesel mill generating 75 horses and 190 Nm (140 pound - feet) of twist.