Not exact matches
The P2D2 - 8 has all of the things we love about the company's subwoofers: They offer VAST design (Vertical Attached Surround Technology) for additional cone surface
area without changing the
dimensions of the frame, conforming to the CEA - 2031 industry standards — plus, lots of features designed for durability even under a heavy
load.
In addition, standard and Maxi models can be specified with fold - flat front passenger seats, incorporating a folding bulkhead, to extend
load - carrying
areas beside the driver and make the most of the internal
dimensions.
The
load area also reflects the car's increased
dimensions, its 520 litres of boot capacity even outstripping that of the BMW 3 Series Touring by 25 litres.
-- Vehicle
dimensions include 3800 mm x 1562 mm x 1868 mm (length x width x height)-- Tyres used are 145R 12LT 8PR with a minimum ground clearance of 160 mm —
Loading area of 3.25 square metres and a
load capacity of 740 kgs — Has a lighter steering wheel, MacPherson strut suspension and a 4.3 m turning radius — It will be initially available in 3 cities — Ahmedabad, Ludhiana and Kolkata
You get lots of well -
dimensioned storage spaces, the boot is enough for a family's needs, the rear seats fold 40/20/40 with one touch allowing for a relatively flat
loading area, you get two 12 - volt power outlets, an electronic parking brake and Mazda's Advanced Keyless Entry which does just that: you keep your key in your pocket and the doors open automatically when you grab the door handles.
Ground Floor
dimensions are (3,200 sq. ft.) and offers glass and show windows all along the street frontages, a massive open
area, private office, server room, male and female bathrooms plus rear
loading and storage
area / warehouse (744 ft.).
The
load of paint carried, more than the
dimensions of the
area to be covered, determines the scale of the gesture.»
ALCOA, Miller, SD 1/2008 to 5/2009 Machinist Apprentice • Cleaned work
areas to ensure optimum work processes • Ascertained that machines are properly calibrated and ready for use according to specified instructions •
Loaded feed mechanisms and verified settings • Assisted in calculating
dimensions and tolerances and aligned and secured fixtures • Measured and tested completed units to check for defects and ensured that they conformed to specifications