The owners didn't have the space for two desks in their home office, so they had a carpenter install one
long piece of plywood with a black lacquered top.
This time the tranny was holding
a long piece of plywood and chasing after the big mama.
Not exact matches
A bat house should be divided inside by a
piece or two
of the
plywood in order to create
long, thin spaces for the bats to burrow in.
Next, I laid out the
pieces on top
of the
plywood, some were quite
long and could be cut down and used in more than one spot, and others were barely too
long.
I worked at a place a
long time ago that they had cut brick size
pieces of varying thicknesses
of plywood and put them up randomly covering the entire wall.
I haven't posted plans for them yet, but basically it is two
long pieces of 1/2 ″
plywood with cut - outs in them for the metal screens.
Drill 3/4 ″ pocket holes on sides
of 3/4 ″
plywood (the
long sides
of the 17 1/8 ″ x 12 1/2 ″
pieces) and 1x2s.
Take two
of the 12 inch wide
pieces of plywood and cut them down to 4 feet
long.
Cut a 12 ″
long 6-1/2 ″ wide
piece of 1/2 ″ MDF or
plywood and secure it to the bottom
of the front
piece.