As with many painters, Kelani uses photography as a preparatory tool for his work however very few artists in Nigeria have placed it on the same level given the reinforced hierarchical barriers between the «art» of painting and
mechanical procedure of photography.
Not exact matches
Our Tesla Rangers can perform an array
of procedures at a remote location, from annual inspections and firmware upgrades to full replacement
of a power electronics module and other
mechanical and electrical components.
«11 Therefore, they are unavailable to the grasp
of those scientific
procedures which seek only to specify the
mechanical - energetic factors in the production
of effects.
This is one
of the insights that tends to confirm Church's thesis, that well defined
procedures may be successively subdivided until the whole can be described in terms
of (very complicated) relationships among simple actions — which have a
mechanical counterpart.
Heat, acid and
mechanical action can all be placed on a protein during any number
of manufacturing
procedures designed to create protein powders and protein - rich foods.
According to a new study published online as an «article in press» in the Journal
of the American College
of Surgeons (JACS), children who are sick enough to require
mechanical ventilation or dialysis before transplantation achieve the same survival benefit as children who are stable prior to the surgical
procedure.
Despite being conceptually simplistic, the single - cell transfection methodology as a
procedure allows transfer
of only a few hundred cells, so it has thus been largely replaced by alternative
mechanical, physical, and vector - based delivery methods.
The destruction
of the cells was a result
of a «single pulse»
procedure (the pair
of simultaneous pulses) and was associated with the
mechanical, non-thermal disruption
of cellular membrane and other components.
Sarah was taken to another part
of the hospital for a clot - retrieval
procedure called
mechanical thrombectomy.
Manual scaling is used for mild cases
of tartar buildup or as a followup to a
mechanical scaling
procedure.
The facility must be able to perform a variety
of procedures including:
mechanical ventilation, invasive blood pressure monitoring, endoscopy, bronchoscopy, abdominal ultrasound and echocardiography.
Jakob Penca, Marek Plichta, and Till Wittwer harness human movement to create a
mechanical - looking conveyance
procedure, while Alexis Smith unfurls a layered version
of Americana.
This pixel is then processed through a set
of repeatable
mechanical procedures, such as wrapping the pixel around the virtual curvature
of a void that produce infinite possible outcomes.
Alice Channer and Bojan Šarcevic create works that are hard to define, incorporating a wide range
of materials and
procedures that pay attention to details, combining the domestic, the body and the
mechanical.
Lured and attuned to the simulative properties and potentials
of a rather curious range
of materials and
mechanical processes, Lefcourt creates works — call them objects, call them items, call them paintings — that leave viewers questioning how much deeper or more detailed their envisioned origins might run, how much further their eventually depicted apertures might open, how many more machines and manual «modelings» could be incorporated into the artist's
procedures of representation and simulation.
The Second Circuit's notion
of value added making a use transformative has fundamentally to do with human creativity; the Ninth Circuit's interpretation
of value added opens the door to a purely
mechanical procedure involving no human creativity whatsoever.
Possesses in - depth knowledge
of maintenance, troubleshooting and repair
procedures in all areas
of facility and
mechanical systems for both commercial and residential buildings.
A
mechanical engineering degree holder and sound knowledge about HVAC automation systems, design
procedures, and repairing
of HVAC products, seeks to work as a HVAC project engineer for a recognized organization.
Expertly, train, manage 22 employees, and 3 supervisors on the daily operations and
mechanical maintenance activities
of the steel producing
procedures and company's policies.
The responsibility
of a
mechanical project engineer includes planning work
procedures, maintaining reliability forecast, managing issues and risk
of the project, preparing budget and project schedule and ensuring delivery
of the project on time.
It is mandatory for a GSE mechanic to have extensive knowledge
of aircraft
mechanical systems and preventive maintenance standards and
procedures.
Comprehensive knowledge
of QA / QC
procedures, installation guidelines
of mechanical equipment and process plant
mechanical principles
As you can see in the
mechanical design engineer resume sample, you should indicate your understanding
of design, production, and testing
procedures.
Possessing over 7 years
of experience in performing assembly, integration, factory testing and maintenance on a wide variety
of systems, following appropriate standards and
procedures, I am confident that hiring me as a
mechanical technician at Weir Group LLC will be an excellent decision to make.
Performed a variety
of aviation related operations including: electrical safety tag out
procedures, flight line / hangar / maintenance shop
procedures, corrosion control processes, physical and
mechanical safety
procedures
Well versed in testing techniques, installation guidelines, and maintenance
procedures of electro -
mechanical system and equipment.
KEY QUALIFICATIONS • Five years
of experience working as a Generator Technician for W.W.Williams • Highly experienced in utilizing acquired knowledge and experience to maintain complex electro -
mechanical systems and equipments • Hands on experience with the tools and equipment common to the trade • In depth knowledge
of safety precautions and
procedures necessary for all
procedures • Proficient in dealing in all kinds
of engines including Diesel and Caterpillar engines
Create this Resume ObjectiveTo utilize my acquired knowledge in
mechanical engineering concepts,
procedures and maintain the company's safe and efficient operations.Personal Information Edward Watkins2262 Chestnut StreetPlant City, FL 33566 (999)
[email protected] of Birth: May 6, 1979Place
of Birth: FLCitizenship: AmericanGender: MaleProfile Summary • Excellent communication skills • Strong analytical skills • Cost Effective Design • Skilled in interpreting blueprints • Root Cause -LSB-...] Continue Reading →
• Able to read and interpret
mechanical drawing and engineering specifications with a view to chart out effective
procedures • Well versed in performing complex inspection and evaluation on electrical components • Functional ability to manage large scope electrical engineering projects with minimal supervision • Track record
of providing leadership focused on accomplishing project objectives
Since I am well - honed with all
mechanical repair and maintenance
procedures in theory, I am confident in advising the most appropriate
procedures which has resulted in recurring business in my previous place
of work.
Entry level assembly operator who performs a wide range
of mechanical assembly
procedures.
Create this Resume Gary Allen 3365 Sunburst Drive Fort Myers, FL 33901 (111)-720-4833
[email protected] Objective: To be able to work as
Mechanical Engineer in a world class organization where my in - depth understanding of mechanical engineering processes and ISO procedures will be greatly utilized to achieve maximum performance of th
Mechanical Engineer in a world class organization where my in - depth understanding
of mechanical engineering processes and ISO procedures will be greatly utilized to achieve maximum performance of th
mechanical engineering processes and ISO
procedures will be greatly utilized to achieve maximum performance
of the company.
(a) any invasive
procedures, including injections other than immunizations, in which human tissue is cut or altered by
mechanical or energy forms, including electrical or laser energy or ionizing radiation, unless under the onsite supervision
of a physician or podiatrist;
Proficient in performing preventive maintenance and
mechanical repair
procedures, handling tools, repairing and maintaining heavy equipment with comprehensive understanding
of maintenance shop and management operations.
Lead
Mechanical Engineer — Holwall Products Assemblage — Fayetteville, TN — 2012 — 2015 • Supervise design, development, and assessment of tools, components, and mechanical equipment • Meet with supervisors and team leaders to review product specifications • Collaborate on installation, operations, and maintenance of equipment throughout plant • Improve workforce optimization, including space requirements and equipment layouts • Reinforce compliance with maintenance procedures to protect safety of personnel and equipment • Implement process procedures, including maintenance schedules and testing protocols Mechanical Designer — UGW Elements — Elkmont, AL — 2013 — Present • Assess project requirements and ensure compliance with specifications • Measure and improve performance of mechanical devices and components • Maintain equipment to ensure safety, efficiency, and reliability • Produce designs and testing protocols • Provide technical advice to personnel from utilities companies, representatives from government agencies, and research org
Mechanical Engineer — Holwall Products Assemblage — Fayetteville, TN — 2012 — 2015 • Supervise design, development, and assessment
of tools, components, and
mechanical equipment • Meet with supervisors and team leaders to review product specifications • Collaborate on installation, operations, and maintenance of equipment throughout plant • Improve workforce optimization, including space requirements and equipment layouts • Reinforce compliance with maintenance procedures to protect safety of personnel and equipment • Implement process procedures, including maintenance schedules and testing protocols Mechanical Designer — UGW Elements — Elkmont, AL — 2013 — Present • Assess project requirements and ensure compliance with specifications • Measure and improve performance of mechanical devices and components • Maintain equipment to ensure safety, efficiency, and reliability • Produce designs and testing protocols • Provide technical advice to personnel from utilities companies, representatives from government agencies, and research org
mechanical equipment • Meet with supervisors and team leaders to review product specifications • Collaborate on installation, operations, and maintenance
of equipment throughout plant • Improve workforce optimization, including space requirements and equipment layouts • Reinforce compliance with maintenance
procedures to protect safety
of personnel and equipment • Implement process
procedures, including maintenance schedules and testing protocols
Mechanical Designer — UGW Elements — Elkmont, AL — 2013 — Present • Assess project requirements and ensure compliance with specifications • Measure and improve performance of mechanical devices and components • Maintain equipment to ensure safety, efficiency, and reliability • Produce designs and testing protocols • Provide technical advice to personnel from utilities companies, representatives from government agencies, and research org
Mechanical Designer — UGW Elements — Elkmont, AL — 2013 — Present • Assess project requirements and ensure compliance with specifications • Measure and improve performance
of mechanical devices and components • Maintain equipment to ensure safety, efficiency, and reliability • Produce designs and testing protocols • Provide technical advice to personnel from utilities companies, representatives from government agencies, and research org
mechanical devices and components • Maintain equipment to ensure safety, efficiency, and reliability • Produce designs and testing protocols • Provide technical advice to personnel from utilities companies, representatives from government agencies, and research organizations
Incumbents
of the Machine Operator II position must be certified in lock out / tag out
procedures and must possess some
mechanical aptitude and problem solving skills.
• Introduce «menu selling»
procedure which significantly streamlined customer handling tasks • Decrease interest paid by the customer, resulting in increased customer satisfaction, while keeping revenue at par with earlier financial years • Close a lucrative deal with a multinational company, which resulted in $ 850,000
of revenue each year for the next 7 years • Confer with clients looking for financing and insurance coverage options for their vehicles • Provide customers with information on how to handle financing and insurance coverage by giving them a list
of possible options • Make financing arrangements with a view
of minimizing impact on the selling gross
of the company • Create and maintain relationships between financers and borrowers by placing clear instructions and timelines • Tie customers close to dealerships in a bid to ensure return business opportunities • Create and administer vehicle service contracts, offering
mechanical coverage in a bid to generate F&I income • Control paperwork once deals are closed and ensure that all information from the customers» end is complete and accurate • Train and educate sales people to deliver information regarding the benefits
of protective products
• Valid driver's license with motorcycle endorsement • Expert in fuel efficiency enhancement • Skilled in assembly and disassembly
of parts • Demonstrated ability to use hand and power
mechanical tools • Adept at taking instructions, communicating effectively with the customer and developing cost plans for repair work • Familiar with engine overhauling and service
procedures
PROFESSIONAL EXPERIENCE January 2007 — Present Precision Corp. — Greentown, IN Assembly Mechanic • Assemble a variety
of units using blue prints, drawings and specifications • Troubleshoot faulty components during and after assembly • Set up and fabricate
mechanical and other components using oral instructions • Use semi automatic machines and hand tools to perform assembly
procedures • Perform administrative tasks associated with assembly work including documentation
Completes daily, weekly, monthly up keep
of facility, equipment, and supplies are maintained in an orderly, safe manner Completes daily, weekly and monthly checklists on building equipment maintenance
procedures and maintains records
of scheduled maintenance
procedures Cleans and inspects boiler; treats water with proper chemicals in the designated pool areas May operate a computer which controls and monitors
mechanical equipment and utility systems Operate equipment properly, promptly reports any problems, completed incident and accident reports as necessary.
A lead Aerospace development engineer with 26 years
of experience in the aerospace and defense industry, who has a vast and varied knowledge
of aircraft
mechanical and electrical systems conception, design and integration
procedures.
Summary Maintenance Mechanic - Electrical Mechanic - Handyman, Reliable worker with strong
mechanical... policies and
procedures, etc: safety, maintenance, benefits, payroll and record keeping... phases
of driver orientation: safety, maintenance, payroll, book keeping Dispatched 40
Professional Duties & Responsibilities Biomedical and biotechnology engineer with background in design
of biomaterials, biosensors, drug delivery devices, microfrabrication, and tissue engineering Working knowledge
of direct cell writing and rapid prototyping Experience fabricating nanocomposite hydrogel scaffolds Proficient in material analysis,
mechanical, biochemical, and morphological testing
of synthetic and biological materials Extensive experience in bio-imaging processes and
procedures Specialized in mammalian, microbial, and viral cell culture Working knowledge
of lab techniques and instruments including electrophoresis, chromatography, microscopy, spectroscopy, PCR, Flow cytometery, protein assay, DNA isolation techniques, polymer synthesis and characterization, and synthetic fiber production Developed strong knowledge
of FDA, GLP, GMP, GCP, and GDP regulatory requirements Created biocompatible photocurable hydrogels for cell immobilization Formulated cell friendly prepolymer formulation Performed surface modification
of nano - particle fillers to enhance their biocompatibility Evaluated cell and biomaterial interaction, cell growth, and proliferation Designed bench - top experiments and protocols to simulate in vivo situations Designed hydrogel based microfluidic prototypes for cell entrapment and cell culture utilizing computer - aided robotic dispenser Determined various
mechanical, morphological, and transport properties
of photocured hydrogels using Instron, FTIR, EDX, X-ray diffraction, DSC, TGA, and DMA Assessed biocompatibility
of hydrogels and physiology
of entrapped cells Evaluated intracellular and extracellular reactions
of entrapped cells on spatial and temporal scales using optical, confocal, fluorescence, atomic force, and scanning electron microscopies Designed various biochemical assays Developed thermosensitive PET membranes for transdermal drug delivery application using Gamma radiation induced graft co-polymerization
of N - isopropyl acylamide and Acrylic acid Characterized grafted co-polymer using various polymer characterization techniques Manipulated lower critical solution temperature
of grafted thermosensitive co-polymer Loaded antibiotic on grafted co-polymer and determined drug release profile with temperature Determined biomechanical and biochemical properties
of biological gels isolated from marine organisms Analyzed morphological and
mechanical properties
of metal coated yarns using SEM and Instron Performed analytical work on pharmaceutical formulations using gas and high performance liquid chromatography Performed market research and analysis for medical textile company Developed and implement comprehensive marketing and sales campaign
Program Manager / Product Development, Engineering IT (04/2005 — 02/2010) • Lead Engineering IT efforts focusing on customer satisfaction, business development, and effective resource management • Oversee Data Management Program comprised
of Data Warehouse and Reporting Infrastructure and Data Mart Development • Lead and facilitate technical teams in gathering requirements and creating business cases for proper initiation
of proposals • Develop and Conduct ROI and Cost / Benefit analysis for the requests within the Engineering IT portfolio • Design and implement Engineering IT department daily operations, policies,
procedures, and direct staff workflow • Initiate projects, employee scheduling, project timelines, and budgets • Conduct management reviews, management program / project health reporting, and staff development initiatives • Create process for streamlining projects identification and prioritization within portfolio and programs • Manage internal team status reporting and dashboard management • Lead change control board (CCB) and Failure Review Board (FRB) for effective & coordinate program operations • Serve as Service Manager and Resource Manager for the program data management ensuring effective operations • Act as technical resource for Business Objects Reporting Infrastructure and Database administration • Design, develop, and deploy application suite for
Mechanical Engineering Testing Solutions (METS) utilizing Oracle Database Application Express and Oracle 10g Database.
While reforms were underway in Queensland, the report documented troubling new findings including use
of dogs,
mechanical restraints and invasive search
procedures and self - harm.