To crown it all,
it meets the safety standards set by the American Society for Testing and Materials (ASTM).
Some manufacturers include a sticker letting you are aware of their product
met the safety standards set by ASTM International (American Society for Testing and Materials).
All car seats on the market are «up to code» since they've made it to market (they are required to
meet safety standards set by the US government) BUT not all are as safe as they could be.
Certified Is Best A certification sticker shows that the manufacturer has
met safety standards set by ASTM International (formerly American Society for Testing and Materials), and that it takes part in a certification program administered by the Juvenile Products Manufacturers Association.
Not exact matches
Keep in mind that food trucks usually have to
meet a special
set of ordinances and
safety compliance
standards, so contact your local health department to determine what your mobile restaurant will require.
«Juice manufactured in Australia must
meet extremely high
standards for
safety and quality as
set by the Food
Standards Australia and New Zealand's (FSANZ) Food Code (the Code).
All chicken products must
meet or exceed these
safety standards set forth by FSIS in order to reach American consumers.
Given the high
safety standards, this is reportedly the only brand of tuna that
meets Consumer Reports» «Low Mercury» criteria
set for pregnant women and children.
With the
safety standards that have been
set by ASTM all
met, the swing is therefore as safe as they come, complete with an adjustable seat recline, 5 - point harness and a very solid base that holds the strong steel frame.
Every booster seat that you can buy from a reputable source will
meet with the
standards set forward by the US government and from the National Highway Traffic
Safety Administration.
Whatever portable travel bed you decide to purchase for your baby must
meet or exceed all
safety specification
set forth by the American
Standard.
All our child car seats are designed to
meet the current
safety standards as
set out in ECE R44.04 or the new i - Size (R129)
safety standards.
We
meet and exceed all
standards set forth for infant and child
safety, when used according to instructions.
They are JPMA certified, and they
meet or exceed all
safety standards set by the CPSC and ASTM.
The LUCID memory foam used in this mattress topper has
met the CertiPUR - US
safety guidelines and
standards set.
Most new cribs
meet voluntary
standards for
safety set by the U.S. Consumer Product Safety Commission (
safety set by the U.S. Consumer Product
Safety Commission (
Safety Commission (CPSC).
Manufactured into each and following every strict
standard of all Maclaren strollers, known as the Maclaren Global
Safety Standards, this umbrella stroller dishes out an impressive set of smartly - engineered security elements that meets the maximum safety standards anywhere in the
Safety Standards, this umbrella stroller dishes out an impressive
set of smartly - engineered security elements that
meets the maximum
safety standards anywhere in the
safety standards anywhere in the world.
Centres must
meet health and
safety qualifications and
standards set by the province or territory.
All car seats manufactured today must be designed to
meet stringent
safety standards set by the Federal government.
Simmons Beauty Rest Sleepy Whispers Mattress Simmons made a non-toxic, chemical free, natural cotton crib mattress that still
meets and exceeds the
set safety standards.
Using older baby swing
sets can pose a serious risk to your newborn child in more ways than you may think; used baby swings mean that they might have some broken parts that can come apart when your child is using it and may not
meet all, if not most of the current
safety standards that are in place today.
Your crib, stroller and swing
set meet high
standards for
safety.
The car seat needs to
meet, and exceed, all
safety standards and regulations
set forth by the federal government.
This Modena Crib design comes with a toddler rail, three position mattress support and a fixed rail, while solid construction from wood and wood products just adds to the
safety of this Storkcraft Modena Crib as it
meets or exceeds the
standards set by both the US and Canada.
What is in serious doubt, however, is the ensuing overreaction of the Suffolk County Legislature, which subsequently passed legislation effectively requiring all county residents operating «a pleasure vessel upon the waters of Suffolk County» to take an 11 - hour boating
safety course and pass a final exam before being issued a boating
safety certificate by «the Commission of the NYS Department of Parks, Recreation and Historic Preservation; by the United States Coast Guard Auxiliary; or by any other entity that offers a boating course that
meets the
standards set by the National Association of Boating Law Administrators.»
That would give the Coast Guard Auxiliary, United States Power Squadrons and similar organizations offering safe - boating courses that
meet the
standards set by the National Association of Boating Law Administrators time to «get everyone on board» and receive necessary
safety certification.
The EPA
sets standards for six principal air pollutants to
meet its obligation under the Clean Air Act to protect the health of the American public, including vulnerable populations, by an adequate margin of
safety.
A White House panel that questions vaccine
safety and attacks immunization
standards set by the U.S. Centers for Disease Control — a possibility raised last week in
meetings with incoming president Donald Trump — could actually lead to increased disease outbreaks.
Rosita extra-virgin cod liver oil consistently
meets or exceeds the
safety standards set by the stringent European Commission and WHO rules on environmental pollutants.
Educational establishments need to consider how they are
meeting the
standards set in The Health and
Safety at Work Act 1974.
The government
sets certain rules against fraud or health and
safety standards, but the consumers ultimately decide whether a product or service
meets their needs.
have to do those things too, and also
meet fire,
safety and sanitation
standards, asbestos regulations, issue driving eligibility certificates to students between the ages of 15 and 17, and provide protective eyewear to students who are in laboratory
settings.
Since its inception in 1966, the National Highway Traffic
Safety Administration has held automakers accountable for recalling vehicles and equipment that have a safety defect or that do not meet the requirements of applicable safety standards set by the agency — resulting in more than 17,000 recalls involving over 500 million vehicles and more than 84 million items of equi
Safety Administration has held automakers accountable for recalling vehicles and equipment that have a
safety defect or that do not meet the requirements of applicable safety standards set by the agency — resulting in more than 17,000 recalls involving over 500 million vehicles and more than 84 million items of equi
safety defect or that do not
meet the requirements of applicable
safety standards set by the agency — resulting in more than 17,000 recalls involving over 500 million vehicles and more than 84 million items of equi
safety standards set by the agency — resulting in more than 17,000 recalls involving over 500 million vehicles and more than 84 million items of equipment.
Not later than 1 year after the completion of each research and testing initiative required under subsection (a), the Secretary shall initiate a rulemaking proceeding to issue a Federal motor vehicle
safety standard if the Secretary determines that such a
standard meets the requirements and considerations
set forth in subsections (a) and (b) of section 30111 of title 49, United States Code.
Safety should come first, and this vehicle just does not
meet the tough
standards set forth by the companies.
From a
safety standpoint, the drive control concept utilized by the e-tron's motors is
set up for redundancy and
meets the highest
safety standards.
The program encourages landlords to promote
safety and livability for their tenants by providing them with training and a
set of
standards that they and their employees must
meet to be certified as an ESP property.
The EPA regulates the use of pesticides and
sets a minimum
standard for
safety and effectiveness that collars must
meet.
16.25.1.6 OBJECTIVE: To promote, preserve and protect the public health,
safety and welfare by regulating the practice of veterinarians, veterinary technicians, bovine artificial insemination technicians, and bovine pregnancy diagnosis technicians; to establish the authority to take action against any licensee or permittee for failure to
meet set minimum
standards for licensure or permit certification as promulgated by the board; and to inspect and regulate veterinary facilities to further protect the public.
As a member we are required to
meet a strict
set of
safety standards and operating procedures.
It has a register of all surf schools and coaches who
meet a
set of requirements embracing high
standards of operation and
safety
And on the certification side, regardless of what your machine looks like, if you can show us that you have a credible case that you will be able to
meet the
standards set out for certifying your machine for performance and
safety, you stand a good chance of your funding getting certified.»
It is against state law for a manufacturer to make and sell a helmet that does not
meet safety standards that the national commissioner
sets.
It
meets or exceeds the curriculum
standards set forth in the Defensive Driving Course Instructor Manual, Eighth Edition, published by the National
Safety Council.
(a)
Meets or exceeds the curriculum
standards set forth in the Defensive Driving Course Instructor Manual, Eighth Edition, published by the National
Safety Council.
This course has
met the
standards set forth by the Florida Department of Highway
Safety and Motor Vehicles for the approval of mature driver courses.
Work closely with subcontractors to solve field problems and inspect
set up to ensure that
safety standards are
met including all PPE equipment being worn and that proper traffic signs are visible for rerouting traffic.
• Exceptionally well - versed in measuring and feeding batches of raw materials into production machines by following
set production procedures • Demonstrated expertise in operating production line equipment such as conveyor belts in accordance to predefined
safety and operational rules • Deep insight into monitoring production processes closely and carrying out basic quality checks • Qualified to operate lifting equipment such as forklifts to maneuver materials to and from the production area • Special talent for ensuring end product conformance to specified industry
standards • Adept at regulating the flow of liquids or gas to
meet the dynamic specifications of each production haul • Proficient in effectively determining damaged end products and isolating them before the beginning of the packaging process • Competent in scraping waste from production machineries and ensuring that appropriate waste disposal activities are performed • Skilled in reading and interpreting gauges and adjusting them to
meet the specific needs of each production cycle • Effectively able to inspect end products to ensure that they
meet quality and quantity
standards detailed in the work order • Well - versed with the structure and function of production equipment, with special focus on performing preventative maintenance on all assigned machinery
PROFESSIONAL HIGHLIGHTS • Over 1 year experience as a Dietary Aide • Highly skilled in preparing and serving food and beverages per recipe or facility procedure • In - depth knowledge of performing a variety of food preparation tasks • Hands - on experience in arranging tray and table
setting with appropriate tableware and condiments • Able to assure that cleanliness and quality
standards are
met • Proven ability to complete daily responsibilities and assignments • Track record of
meeting objectives of the facility for future growth • Thorough understanding of
safety and legal requirements at the facility • Demonstrated ability to interact helpfully with persons of different social and economic backgrounds
• Track record of efficiently preparing worksites by removing hazardous materials and debris • Proven ability to fashion track lengths according to
set standards and specifications • Hands - on experience in inspecting tracks to determine need for repair and maintenance • Familiar with replace, remove and repair tracks and related components to ensure smooth railroad operations • Effectively able to handle drilling duties to insert bolts and joints and perform preventative maintenance on tracks and components • Highly skilled in gauging deviations in track surfaces and performing related repair work to ensure train
safety • Exceptionally well - versed in operating picks, shovels, bulldozers and spike - driving machines to
meet rail track repair, maintenance and installation needs • Deep insight into inspecting tracks for defects and reporting and clearing potential obstacles, especially after bad weather • First - hand experience in performing lookout and hand signaling duties during track operations such as installation and maintenance • Competent in laying and fixing foundations and sleepers for tracks, cutting tracks to lengths and installing railway switches • Qualified to remove damaged rail track parts and examine and maintain switch lamps and wheel bearings