For optimum braking performance, the GTi Concept is equipped with four discs; 302
mm diameter at the front and 249 mm at the rear, set off by red - painted brake callipers.
High performance steel and aluminium brake discs, measuring 350
mm diameter at the front and 328 mm at the rear, reduce weight by a further 3Kg in addition to improving braking performance.
Not exact matches
Able to detect pieces of stainless steel as small as 0.3
mm in
diameter, plus aluminium, glass, stones, rubber, dense plastic and shell
at high speeds, it is suitable for a wide variety of packed and unpacked products and includes a built - in air conditioning unit.
Designed to sort mangos of between 60
mm and 160
mm diameter, the machine uses a sweep chute to reduce the speed
at which the fruit moves, preventing bruising.
During the first six weeks, babies gaining weight well usually poop
at least 3 to 4 times a day with stools
at least the
diameter of a US quarter (22
mm) or larger.
• The mid-section of the wall involved a reinforced 12
mm diameter high tensile steel
at 450
mm centers both ways and
However, in this study all patients who developed TR often had tricuspid annulus
diameters less than 40
mm, as well as less than moderate TR by echocardiography
at the time of the MV repair.
A research team in the Department of Electrical and Electronic Information Engineering and the EIIRIS
at Toyohashi University of Technology developed 5 - μm -
diameter needle - electrodes on 1
mm × 1
mm block modules.
Dr Jeremy Thomas, a consultant pathologist
at the Western General Hospital, Edinburgh, UK, told the European Breast Cancer Conference that although the majority of women with DCIS received the correct surgery for their disease, large numbers of women were undergoing mastectomy for DCIS either as a result of failed breast conservation surgery or for tumors that turned out to be smaller than 20
mm in
diameter and therefore should normally have had a lumpectomy rather than a mastectomy.
The study enrolled 100 patients with de novo coronary lesions 2.25 - 3.50
mm in
diameter and length ≤ 27
mm in two 50 - patient cohorts for angiographic, intravascular ultrasound, and clinical assessment
at nine or 24 months, with optical coherence tomography (OCT) performed in a subset of 30 patients
at multiple time periods.
The treated and untreated tube pieces of
at least 3 cm length (4
mm internal
diameter) were connected to a heart - lung machine (Stockert III, Sorin Group, Munchen) to pass heparinized blood over that, with flow rate of 3 litres / min for 72 hrs.
objectives include: Year 6 objectives • solve problems involving the calculation and conversion of units of measure, using decimal notation up to 3 decimal places where appropriate • use, read, write and convert between standard units, converting measurements of length, mass, volume and time from a smaller unit of measure to a larger unit, and vice versa, using decimal notation to up to 3 decimal places • convert between miles and kilometres • recognise that shapes with the same areas can have different perimeters and vice versa • recognise when it is possible to use formulae for area and volume of shapes • calculate the area of parallelograms and triangles • calculate, estimate and compare volume of cubes and cuboids using standard units, including cubic centimetres (cm ³) and cubic metres (m ³), and extending to other units [for example,
mm ³ and km ³] • express missing number problems algebraically • find pairs of numbers that satisfy an equation with 2 unknowns • enumerate possibilities of combinations of 2 variables • draw 2 - D shapes using given dimensions and angles • recognise, describe and build simple 3 - D shapes, including making nets • compare and classify geometric shapes based on their properties and sizes and find unknown angles in any triangles, quadrilaterals, and regular polygons • illustrate and name parts of circles, including radius,
diameter and circumference and know that the
diameter is twice the radius • recognise angles where they meet
at a point, are on a straight line, or are vertically opposite, and find missing angles • describe positions on the full coordinate grid (all 4 quadrants) • draw and translate simple shapes on the coordinate plane, and reflect them in the axes • interpret and construct pie charts and line graphs and use these to solve problems • calculate and interpret the mean as an average • read, write, order and compare numbers up to 10,000,000 and determine the value of each digit • round any whole number to a required degree of accuracy and more!
Where there are four or more cubicles to a block,
at least one should be enlarged to a
diameter of 1,200
mm, with both horizontal and vertical grab rails.
Each hole needs to meet regulation cup size, which by rule must have a
diameter of 108
mm (4.25 inches) and a depth of
at least 100
mm (3.94 inches).
The injector tip's
diameter has also been reduced to 6
mm (0.24 inch), which was done to improve the combustion chamber's integration, stiffness, and reduce temperatures
at the injector plate.
The GT3 RS's naturally aspirated 4 - litre flat - six is carried over from the previous - generation car (and the current GT3), with power increasing by 20bhp to 513bhp
at 8450rpm (200rpm higher than its predecessor) and torque rising by 7 lb ft to 346 lb ft.. There's a new titanium exhaust with 91
mm diameter pipes, a revised intake system and a new engine management system that account for the slightest of gains in the sprints (
at 3.2 seconds it's a tenth quicker than the old car to 62mph) but will have a bigger impact on the car's as - yet - undisclosed Nürburgring lap time.
And look
at the front ones in particular, for no other reason than that they are so impressively large (398
mm in
diameter compared with 380
mm for the regular F430) that they barely fit behind the wheels.
Brake disc
diameters are 330
mm at the front and 299
mm at the rear.
On the new 718 models, the cross-drilled ceramic brake discs of PCCB have a
diameter of 350
mm at the front and rear — for even more formidable braking performance.
For the new Panamera models, the cross-drilled ceramic brake discs of PCCB now have a
diameter of 420
mm at the front and 390
mm at the rear — for even more formidable braking performance.
The cross-drilled ceramic brake discs have a correspondingly large
diameter of 410
mm at the front axle and 390
mm at the rear — for even more formidable braking performance.
6 - piston aluminium monobloc fixed - caliper brakes
at front, 4 - piston aluminium monobloc fixed - caliper brakes
at rear, internally vented brake discs, Brake discs
Diameter front 360
mm, rear 358
mm
Six - piston aluminium monobloc fixed brake calipers
at front, Four - piston aluminium monobloc fixed brake calipers
at rear, internally vented brake discs, Integral brake discs with
diameter of 350
mm at front and 330
mm at rear
On the 718 models, the cross-drilled ceramic brake discs of PCCB have a
diameter of 350
mm at the front and rear — for even more formidable braking performance.
Six - piston aluminium monobloc fixed brake calipers
at front and four - piston units
at rear, brake calipers with red finish, Composite brake discs with brake chambers in aluminium, discs internally vented and cross-drilled,
diameter (front / rear): 380
mm
At the same time
diameter of cylinders increased to 94
mm, used the crankshaft with a piston stroke of 84
mm.
The cross-drilled ceramic brake discs of PCCB have a
diameter of 420
mm at the front and 410
mm at the rear — for even more formidable braking performance.
Stopping power is provided by bespoke high - performance Brembo brakes, which feature four - piston calipers and drilled discs that measure 350
mm in
diameter at the front.
It's the biggest, strongest braking system ever fitted to a Bentley, featuring the largest front brake system available on any production car — the brake discs measure 440 -
mm in
diameter at the front and 370 -
mm at the rear.
In the front, the brake callipers grip onto 380 -
mm discs;
at the rear, the
diameter is 356
mm.
The V12 Vantage's CCM discs are 398
mm in
diameter at the front and 360
mm at the rear while the brake callipers feature six pistons
at the front, four
at the rear and have a larger brake pad area compared to the V8 Vantage.
The technical fiber has strands that are only 0.08
mm — 0.19
mm in
diameter, woven together in a pattern oriented
at precisely 45 degrees.
New Brembo brakes handle the stopping with 400
mm diameter two - piece ventilated brake discs up front and 350
mm ventilated discs
at the rear, paired with 6 - piston callipers up front and 4 - piston callipers
at the rear — all painted yellow.
Standardly, the GT and the GT S benefit from a standard high performance composite brake system with brake discs measuring 360/360
mm in
diameter at the front / rear
at GT and 390/360
mm at GT S (personalized with red calipers).
Additionally the track monster features a limited - slip differential, a magnesium torque tube with a carbon fibre drive shaft, and massive Brembo carbon - ceramic brakes measuring 380
mm in
diameter up front and 360
mm at the rear, housed within 345/30 R19 rubber on each wheel.
The PCD (Pitch Circle
Diameter) centre drilling is 50.8
mm and consists of 3 x holes placed
at 10, 2 and 6 o'clock.
For the first time on an Aston Martin road car, the DBS had vented carbon ceramic brakes: 398
mm diameter with six pot calipers
at the front, 360
mm four pot calipers
at the back.
6 - piston aluminium monobloc fixed - calliper brakes
at front, 4 - piston aluminium monobloc fixed - calliper brakes
at rear, internally vented brake discs, Brake discs
Diameter front 360
mm, rear 358
mm
The
diameter of the intake duct measures 70
mm to increase intake flow, especially
at high rpm.
Technical Data: 12 - cylinder - engine with 60 degree V - configuration, four valves per cylinder, bore x stroke 84.6
mm x 92
mm (3.33 in x 3.63 in), capacity 6,749 cc (411.8 cu in); digital engine control, SAE 453bhp
at 5350rpm (DIN 460hp / 338KW
at 5,350 rpm), max torque 531 lb ft (720Nm)
at 3,500 rpm; ZF6HP32 6 - speed automatic gearbox; independent suspension front and rear, ventilated disc brakes (
diameter front 374
mm, rear 370
mm), anti locking device; wheelbase 130,7 in (3,320
mm); height 62.2 in (1,581
mm), width 78.2 in (1,987
mm), overall length 220.8 in (5,609
mm); Michelin tyres PAX265x790 R540 A 11W on light alloy wheels PAX265x540A ALU (optional tyre size: front Goodyear EMT 255 / 50R21 106W on alloy wheels 8x21 and rear Goodyear EMT 285 / 45R21 109W on alloy wheels 9.5 x21 rims
at the rear; max.
The BMW 1M Coupe with 521 HP by Tuningwerk rides on forged
ATS superlight rims (19 inch) wrapped in Dunlop blow - up «Sport Maxx» tires (245 / 35R19
at the front and 285 / 30R19
at the rear) and uses a newly installed steel braking system featuring 370
mm in
diameter discs by Mov «it (380
mm carbon ceramic discs also available).
The four internally ventilated disc brakes measure 400
mm in
diameter up front and 365
mm at the rear.
Technical Data: W12 - cylinder - engine (72deg angle between two main banks, 15deg between staggered cylinders), bore x stroke 84 x 90.2
mm, capacity 5998 cc; 4 valves per cylinder, 4 overhead camshafts; Bosch Motronic digital engine control, twin Borg - Warner turbochargers, air to air intercooling, 552bhp / 411KW
at 6,100 rpm, torque 650Nm (479 lb ft)
at 1600 rpm; ZF 6HP26 6 - speed automatic gearbox; four - wheel drive with central Torsen differential, independent suspension front and rear; air springs, ASR electronic traction control, Bosch ESP 5.7 electronic stability program; TEVES ventilated disc brakes front 15.9 in
diameter (405
mm) and 1.4 in (36
mm) thick, back 13.2 in
diameter (335
mm) and 0.9 in (22
mm) thick, anti-lock device (plus HBA > Hydraulic Brake Assist < and EBD > Electronic Brakeforce Distribution <), MSR drag torque control; wheelbase 108.07 in (2745
mm); Overall weight 5,500 lb (2,495 kg); tyres 275 / 40R19 on 19in rims (optional 19in split rims or 275 / 35R20 on 20in split rim 7 - spoke sports alloy wheels); max.
Technical Data: 12 - cylinder - engine with 60 degree V - configuration, four valves per cylinder, bore x stroke 84.6
mm x 92
mm (3.33 in x 3.62 in), capacity 6,749 cc (411.8 cu in); digital engine control, SAE 453bhp (SAE)
at 5350rpm (DIN 460hp / 338KW
at 5,350 rpm), max torque 531 lb ft (720Nm)
at 3,500 rpm; ZF6HP32 6 - speed automatic gearbox; independent suspension front and rear, ventilated disc brakes (
diameter front 14.7 in / 374
mm, rear 14.6 in / 370
mm), anti locking device; wheelbase 130.7 in (3,320
mm), track front 66.4 in (1,687
mm), track rear 65.8 in (1,687
mm); height 62.7 in (1,592
mm), width 78.2 in (1,987
mm), overall length 220.8 in (5,609
mm), curb weight 5,776 lb (2,620 kg), gross weight 6,724 lb (3,050 kg); tyres front Goodyear EMT 255/50 R21 106W on light alloy wheels 8in x 21in, tyres rear Goodyear EMT 285/45 R21 109W on light alloy wheels 9.5 in x 21in); max.
Technical Data: Twin turbo V12 - cylinder - engine, four valves per cylinder, bore x stroke 3.48 in x 3.5 in (88.3
mm x 89
mm), capacity 6,592 cc (402.3 cu in); digital engine control, 563bhp (SAE)
at 5250rpm (DIN 570hp / 420KW
at 5,250 rpm), max torque 575 lb ft (780Nm)
at 1,500 rpm; ZF 8HP90 8 - speed automatic gearbox; independent suspension front and rear with Electronic Stability Program (ESP) including Antilock Braking System (ABS) and Electronic Brake Pressure Distribution (EBD), traction control Automatic Slip Regulation (ASR), aquaplaning detection; ventilated disc brakes (
diameter front 16.1 in / 410
mm, rear 15.8 / 402
mm); wheelbase 129.7 in (3,295
mm), track front 63.9 in (1,622
mm), track rear 65.4 in (1,660
mm); height 61in (1,550
mm), width 76.7 in (1,948
mm), overall length 212.6 in (5,399
mm), DIN curb weight 5,203 lb (2,360 kg), EU curb weight 5,368 lb (2,435 kg), gross weight 6,482 lb (2,940 kg), payload 1,279 lb (580 kg); tyres front Goodyear EMT255 / 50R19 103Y on light alloy wheels 8,5 x19in, tyres rear Goodyear EMT255 / 50R19 103Y on light alloy wheels 8,5 x19in (optional tyres front Goodyear EMT255 / 45 R20 101Y Summer on light alloy wheels 8,5 Jx20 EH2 + IS25, tyres rear Goodyear EMT285 / 40 R20 104Y Summer on light alloy wheels 9,5 Jx20 EH2 + IS33), tyre pressure monitoring system; max.
Technical Data Bentley Continental GT Speed: W12 - cylinder - engine (72deg angle between two main banks, 15deg between staggered cylinders), bore x stroke 84 x 90.2
mm, capacity 5998 cc; 4 valves per cylinder, 4 overhead camshafts; Bosch Motronic ME7.1.1 digital engine control, twin turbochargers air to air intercooling, 600bhp / 449kW)
at 6000rpm, torque 750Nm (553 lb ft)
at 1750 rev / min; ZF 6 - speed automatic gearbox; four - wheel drive with central Torsen differential, independent suspension front and rear; air springs, ASR electronic traction control, uprated Bosch 8.1 ESP electronic stability program; TEVES ventilated disc brakes front 405
mm diameter (15.9 in) and 36
mm (1.4 in) thick, back 335
mm diameter (13.2 in) and 22
mm (0.9 in) thick, anti-lock device, fade - resistant carbon - ceramic brakes 420 x 40
mm carbon - silicon carbide, cross-drilled front discs and 356 x 28
mm rears optional; HBA «Hydraulic Brake Assist» and EBD «Electronic Brakeforce Distribution», MSR drag torque control; wheelbase 2745
mm (108.07 in); 9.5 Jx20 wheels with 275 / 35x20 bespoke Pirelli P - Zero performance tyres; max.
Exhaust valves are 30
mm in
diameter and canted
at 18.8 degrees.
The braking system features Brembo calipers and carbon - ceramic discs, measuring 380
mm in
diameter at the front and 360
mm at the rear, and an adjustable anti-lock braking system sourced from Bosch.
The ventilated, perforated disc brakes have a
diameter of 365
mm at the front, and 335
mm at the rear.
Overall Length: 184.4 Overall Width: 73.7 Overall Height: 72.6 Wheelbase: 116.0 Front Head Room: 41.3 Rear Head Room: 40.4 Front Leg Room: 41.0 Rear Leg Room: 37.2 Front Shoulder Room: 55.8 Rear Shoulder Room: 56.8 Front Hip Room: 55.6 Rear Hip Room: 56.7 Two 12V Dc Power Outlets Transmission Hill Holder Seatbelt Pretensioners: Front Rear Center Seatbelt: 3 - Point Belt Door Reinforcement: Side - Impact Door Beam Engine Immobilizer Cargo Tie Downs Floor Mats: Carpet Front And Rear Cupholders: Front And Rear Door Pockets: Driver And Passenger Seatback Storage: 2 Tires: Width: 225
Mm Tires: Profile: 75 Tires: Speed Rating: S
Diameter Of Tires: 16.0 Type Of Tires:
At Tires: Prefix: P Left Rear Passenger Door Type: Conventional Rear Door Type: Conventional Right Rear Passenger Door Type: Conventional Black Bumpers Fixed Antenna 4 Door Driver Airbag Manual Child Safety Locks Siriusxm Satellite Radio