Performed
new electrical control system field installations as well as renovations to existing systems to include: conduit and wire installations, control device and motor installations and wiring and set - ups.
Ford also says that
the new electrical controls are closer to production - ready.
Not exact matches
Researchers are proposing a
new technology that
controls the flow of heat the way electronic devices
control electrical current.
Researchers are proposing a
new technology that might
control the flow of heat the way electronic devices
control electrical current, an advance that could have applications in a diverse range of fields from electronics to textiles.
Other biomedical engineers are developing a
new generation of prosthetic limbs that amputees can
control with neurosensors, with assists from computer science, neuroscience, and
electrical and mechanical engineering, among other disciplines.
This
new technique enables tight
control over diameter, length and surface properties of the nanorods, whose optical,
electrical, magnetic and catalytic properties depend on the precursor materials used and the dimensions of the nanorods.
«With our system, you can draw a polygon on the map and say, «I want this entire region to be
controlled,»» says Jason Gao, a graduate student in
electrical engineering and computer science who developed the new system together with his advisor, Professor of Electrical Engineering and Computer Science Li - S
electrical engineering and computer science who developed the
new system together with his advisor, Professor of
Electrical Engineering and Computer Science Li - S
Electrical Engineering and Computer Science Li - Shiuan Peh.
On June 18, neurosurgeons at the University of Alabama at Birmingham implanted a
new type of
electrical stimulator to
control seizures in patients with difficult - to -
control epilepsy.
«In the future, we envision
new types of exciton - based devices that respond to external forces like pressure to
control the distance and
electrical behavior.»
Because the phases respond to both magnetic and
electrical fields, the material can be
controlled in multiple ways, which creates the possibility for
new types of computer chips.
In a
new development, Technische Universität Wien has managed to use
electrical fields to
control the magnetic oscillations of certain ferrous materials.
This research offers
new insights into how atoms in the mineral and the water molecules rearrange during charging, how these structures
control the flow of
electrical charge, and ultimately how this information is essential to understanding how minerals dissolve.
An international team of scientists has discovered a
new type of silicon that could be used to
control light beams in a
new kind of photonic chip — a chipset where information is carried by light beams rather than
electrical currents.
Susan Amara, USA - «Regulation of transporter function and trafficking by amphetamines, Structure - function relationships in excitatory amino acid transporters (EAATs), Modulation of dopamine transporters (DAT) by GPCRs, Genetics and functional analyses of human trace amine receptors» Tom I. Bonner, USA (Past Core Member)- Genomics, G protein coupled receptors Michel Bouvier, Canada - Molecular Pharmacology of G protein - Coupled Receptors; Molecular mechanisms
controlling the selectivity and efficacy of GPCR signalling Thomas Burris, USA - Nuclear Receptor Pharmacology and Drug Discovery William A. Catterall, USA (Past Core Member)- The Molecular Basis of
Electrical Excitability Steven Charlton, UK - Molecular Pharmacology and Drug Discovery Moses Chao, USA - Mechanisms of Neurotophin Receptor Signaling Mark Coles, UK - Cellular differentiation, human embryonic stem cells, stromal cells, haematopoietic stem cells, organogenesis, lymphoid microenvironments, develomental immunology Steven L. Colletti, USA Graham L Collingridge, UK Philippe Delerive, France - Metabolic Research (diabetes, obesity, non-alcoholic fatty liver, cardio - vascular diseases, nuclear hormone receptor, GPCRs, kinases) Sir Colin T. Dollery, UK (Founder and Past Core Member) Richard M. Eglen, UK Stephen M. Foord, UK David Gloriam, Denmark - GPCRs, databases, computational drug design, orphan recetpors Gillian Gray, UK Debbie Hay,
New Zealand - G protein - coupled receptors, peptide receptors, CGRP, Amylin, Adrenomedullin, Migraine, Diabetes / obesity Allyn C. Howlett, USA Franz Hofmann, Germany - Voltage dependent calcium channels and the positive inotropic effect of beta adrenergic stimulation; cardiovascular function of cGMP protein kinase Yu Huang, Hong Kong - Endothelial and Metabolic Dysfunction, and Novel Biomarkers in Diabetes, Hypertension, Dyslipidemia and Estrogen Deficiency, Endothelium - derived Contracting Factors in the Regulation of Vascular Tone, Adipose Tissue Regulation of Vascular Function in Obesity, Diabetes and Hypertension, Pharmacological Characterization of
New Anti-diabetic and Anti-hypertensive Drugs, Hypotensive and antioxidant Actions of Biologically Active Components of Traditional Chinese Herbs and Natural Plants including Polypehnols and Ginsenosides Adriaan P. IJzerman, The Netherlands - G protein - coupled receptors; allosteric modulation; binding kinetics Michael F Jarvis, USA - Purines and Purinergic Receptors and Voltage-gated ion channel (sodium and calcium) pharmacology Pain mechanisms Research Reproducibility Bong - Kiun Kaang, Korea - G protein - coupled receptors; Glutamate receptors; Neuropsychiatric disorders Eamonn Kelly, Prof, UK - Molecular Pharmacology of G protein - coupled receptors, in particular opioid receptors, regulation of GPCRs by kinasis and arrestins Terry Kenakin, USA - Drug receptor pharmacodynamics, receptor theory Janos Kiss, Hungary - Neurodegenerative disorders, Alzheimer's disease Stefan Knapp, Germany - Rational design of highly selective inhibitors (so call chemical probes) targeting protein kinases as well as protein interaction inhibitors of the bromodomain family Andrew Knight, UK Chris Langmead, Australia - Drug discovery, GPCRs, neuroscience and analytical pharmacology Vincent Laudet, France (Past Core Member)- Evolution of the Nuclear Receptor / Ligand couple Margaret R. MacLean, UK - Serotonin, endothelin, estrogen, microRNAs and pulmonary hyperten Neil Marrion, UK - Calcium - activated potassium channels, neuronal excitability Fiona Marshall, UK - GPCR molecular pharmacology, structure and drug discovery Alistair Mathie, UK - Ion channel structure, function and regulation, pain and the nervous system Ian McGrath, UK - Adrenoceptors; autonomic transmission; vascular pharmacology Graeme Milligan, UK - Structure, function and regulation of G protein - coupled receptors Richard Neubig, USA (Past Core Member)- G protein signaling; academic drug discovery Stefan Offermanns, Germany - G protein - coupled receptors, vascular / metabolic signaling Richard Olsen, USA - Structure and function of GABA - A receptors; mode of action of GABAergic drugs including general anesthetics and ethanol Jean - Philippe Pin, France (Past Core Member)- GPCR - mGLuR - GABAB - structure function relationship - pharmacology - biophysics Helgi Schiöth, Sweden David Searls, USA - Bioinformatics Graeme Semple, USA - GPCR Medicinal Chemistry Patrick M. Sexton, Australia - G protein - coupled receptors Roland Staal, USA - Microglia and neuroinflammation in neuropathic pain and neurological disorders Bart Staels, France - Nuclear receptor signaling in metabolic and cardiovascular diseases Katerina Tiligada, Greece - Immunopharmacology, histamine, histamine receptors, hypersensitivity, drug allergy, inflammation Georg Terstappen, Germany - Drug discovery for neurodegenerative diseases with a focus on AD Mary Vore, USA - Activity and regulation of expression and function of the ATP - binding cassette (ABC) transporters
Own a 2015 spark bought brand spanking
new with 30 miles on it, tranny has gone out, been in the shop 8 times after I take it back in for tranny issues, no AC,
electrical gremlins... Really loved it when the traction
control came on, on a clear day on perfect road conditions causing almost a wreck.
The
new BMW HP4 RACE comes with an extensive package of electronic
control and assistance systems as well as a weight - optimised on - board
electrical system which has been optimised to meet racing needs.
Coming to cabin features, the Sport Line comes with Ambient interior lighting with six different mood lights, automatic air conditioning, front armrest with storage compartment, BMW's
new gesture
control, sport seats for driver and passenger,
electrical adjustment for seat height, seat width, backrest rake and headrest height.
All other models receive Honda's all -
new 1.5 - litre DOHC direct - injection turbo - petrol four - cylinder with variable valve timing
electrical control (VTC) and electronic turbo waste gate, producing 127kW and 220Nm and consuming 6.0 L / 100 km.
The adoption of a
new electrical architecture has also brought Dynamic Body
Control as part of an update to the C - Class's optional Air Body
Control air suspension and a Car - To - X capability that enables over-the-air software updates.
The
new automatic and
electrical gearbox
control, Shift and Park by Wire, is easy to use, intuitive and ergonomic.
We stand by you and your Maserati with coverage for up to 2 years beyond
New Car Warranty with unlimited mileage on the following components: engine, transmission, differential and driveshaft, suspension, steering, brake system, cooling system, fuel system,
electrical components and climate
control system.
The EMerge standard also embraces the trend toward using on - site alternative energy, by providing a means of direct and more efficient connection between these
new energy sources and interior
electrical loads, like lighting and
controls.
iHome is giving you remote
control over any
electrical device with its
new HomeKit - enabled smart plug.
If you are searching for an experienced and determined
Electrical and
Controls Engineer who will generate expert company and client service and support, design initiatives as well as keeping an eye on the «pulse» of
new emerging technologies, please contact me to arrange an interview.
Implement Project
Controls practices and procedures to three capital projects, from
electrical generation redundancy to
new manufacturing facilities.
An
Electrical Contractor mostly involved in designing, building and maintaining electrical automation controls for medium to large industrial and retail commercial projects as well new commercial and industrial installations and re
Electrical Contractor mostly involved in designing, building and maintaining
electrical automation controls for medium to large industrial and retail commercial projects as well new commercial and industrial installations and re
electrical automation
controls for medium to large industrial and retail commercial projects as well
new commercial and industrial installations and renovations.
I work primarily with OEM's, System Integrators and End users to develop
new machine concepts, design the
electrical controls architecture for entire system integration, and plan migration strategies for existing
Rotating shifts: Tuesday to Friday (07.00 — 17.00) and Saturday (07.00 — 14.00) As a Senior Maintenance Engineer, you will have the following skills and duties: PPM and reactive maintenance with FMCG environment Working on a mixture of
new and old production machinery Experience of being a time served engineering with multi-skilling 2 years minimum experience within an automated manufacturing environment
Electrical experience: electrical qualification / apprenticeship Responsible for the day to day engineering and maintenance — ensuring work is carried out to the highest standard while maximizing machine efficiencies You will also work on general machinery such as pumps, vessels, conveyors, wrappers, palletising and packaging City and guilds 17th Edition Desirable Skills and Experience: PLC, Pneumatics, Hydraulics, Temperature Control, Welding, FLT, Lean Experience For your experience as a Senior Maintenance Engineer we can offer you the following: # 35000 plus (dependant on experience) Permanent Position Overtime available 28 days annual leave (Inclusive of bank holidays) If you are interested in the position of Senior Maintenance Engineer, please do not hesitate in forwarding your CV im
Electrical experience:
electrical qualification / apprenticeship Responsible for the day to day engineering and maintenance — ensuring work is carried out to the highest standard while maximizing machine efficiencies You will also work on general machinery such as pumps, vessels, conveyors, wrappers, palletising and packaging City and guilds 17th Edition Desirable Skills and Experience: PLC, Pneumatics, Hydraulics, Temperature Control, Welding, FLT, Lean Experience For your experience as a Senior Maintenance Engineer we can offer you the following: # 35000 plus (dependant on experience) Permanent Position Overtime available 28 days annual leave (Inclusive of bank holidays) If you are interested in the position of Senior Maintenance Engineer, please do not hesitate in forwarding your CV im
electrical qualification / apprenticeship Responsible for the day to day engineering and maintenance — ensuring work is carried out to the highest standard while maximizing machine efficiencies You will also work on general machinery such as pumps, vessels, conveyors, wrappers, palletising and packaging City and guilds 17th Edition Desirable Skills and Experience: PLC, Pneumatics, Hydraulics, Temperature
Control, Welding, FLT, Lean Experience For your experience as a Senior Maintenance Engineer we can offer you the following: # 35000 plus (dependant on experience) Permanent Position Overtime available 28 days annual leave (Inclusive of bank holidays) If you are interested in the position of Senior Maintenance Engineer, please do not hesitate in forwarding your CV immediately.
Tags for this Online Resume: ISO2001, Manufacturing Medical equipments, Quality Assurance electronic
controls, Quality Assurance Testing, Test, Autocad drawings, Autodesk AutoCAD, Flooring experience with wood floor, ceramics, any kind of flooring, HVAC
new system commercial, residential installation, maintenance, Engineering design production lines in factory, change parameters of PLC, Plumbing design problem solving with any
electrical problems, and plumbing problems, Roofing, residential, commercial.
PROFILE Over 23 years of experience in maintenance, troubleshooting and repairing
electrical and electronic systems and equipment including robotic, Led Huge outdoor and indoor screens and Led, Light beams, pneumatic, mechanical,
control circuit, power supply, Adept at providing technical equipment support and developing
new processes through ongoing maintenance, defect resolution, and enhancement solutions.
IGM Robotics (Menomonee Falls, WI) 02/2008 — 03/2009 Robot Technician • Serve as a robot technician responsible for the mechanical and
electrical design of robot cells • Build
electrical cabinets, hydraulics, pneumatics and oversee the setup and installation from propane weld equipment • Install safety equipment,
controls and write PLC programs for Safety PLC to
newest codes and OSHA Standards • Coordinate and install Device NET • Install machinery at customer locations customizing to meet varied and exacting customer specifications • Design curriculum and lead training classes for customers in robot and machine software • Service, troubleshoot, and repair equipment for clients throughout the United States • Assist customers with questions concerning programming and spare parts over the telephone helpline • Instruct interns on machine building, wiring, hydraulics, and pneumatics • Utilize linguistic skills to translate German wire schematics and manuals into English
Grain Processing Corporation (Washington, IN) 5/1999 — 4/2001
Electrical and Instrumentation Technician • Maintained process
control of grain processing operations, by utilizing DCS controller troubleshooting capabilities, modifying function sequence tables, and programming
new ladder logic as requested by production • Tuned process
control loops and calibrated instrumentation to maintain reliable loop feedback • Repaired and maintained all temperature, pressure, flow, level instrumentation, HART protocol, and Smart capable devices • Developed predictive and preventative maintenance tasks along with
control systems on instrumentation, gas trains, and
control valves • Trained and assisted production team members on proper operation, troubleshooting techniques, and equipment / instrumentation utilization • Updated all piping and instrumentation drawing (PID's) after installation of
new hardware and software
Designed for the company's
new electrical sliding door series 2000, 2001 and 2003, the system comes with a hand - held remote
control that adjusts both the sensor and operating mechanism of the door.
This home has been substantially updated with a
new electrical system that can be
controlled remotely via wifi,
new plumbing, high end appliances, heated floors,
new lighting, furniture, bathrooms and more.
New electrical outlets provide USB connections for sound and video equipment that can be
controlled remotely as well.»