Place in a piping bag fitted with a very small fluted nozzle and make 2 - 3 indents (directly with
the nozzle into the top of each éclairs — for small éclairs, make on hole near either extremity — for normal ones, make one hole in the middle and 1 near either extremity).
Kennedy asked for $ 3 worth of gas and went around to watch as the attendant at the cut - rate pump plunged
the nozzle into the Mustang.
In modern electrical air conditioners, a liquid refrigerant is forced through a small
nozzle into a large chamber.
Remove cap and gently insert
nozzle into rectum.
Suppose a gas in a cylinder is allowed to expand through
a nozzle into deep space.
You can get
the nozzle into areas you normally can't reach with a microfiber cloth.
Not exact matches
Notably, GE's new jet engine uses a series of sophisticated 3 - D - printed fuel
nozzles; they are lighter and far more durable because intricate cooling channels have been built
into them.
To make baby macarons, use a # 9 plain
nozzle fitted
into a large piping bag.
A
nozzle passes
into the bottle at the pre-set height, and the bottles will fill until they touch the
nozzle.
Place the piping bag, without a
nozzle attached,
into a large jug.
Decant the frosting
into a piping bag that has not been fitted with a piping
nozzle.
Spoon the buttercream
into a large piping bag without a
nozzle fitted.
Spoon a few tbsp coconut butter
into a freezer bag (or piping bag with a fine
nozzle) and allow to cool slightly to thicken a little.
To fill, place your filling of choice
into a piping bag fitted with a Bismarck tip (a long thin piping tip used for doughnuts) or a small round piping
nozzle.
Place
into a piping bag with a 1 cm
nozzle and pipe 2.5 cm rounds onto a lined baking tray.
Pour frosting
into a piping bag fitted with the
nozzle of your choice and pipe out onto the cooled cupcakes.
Spoon
into a piping bag fitted with a medium star
nozzle.
Pipe the mixture
into sausage shapes about 10 cm / 4 inches long, using a large open round
nozzle, onto the baking sheet (s).
Pour the batter
into an icing bag with a small
nozzle (small enough to fit
into the egg holes) and squeeze the batter
into the egg shells until about 2/3 full.
Transfer the meringue mixture
into a icing bag with a large star - shaped
nozzle and pipe
into nests or cup shapes.
Place the icing
into a piping bag and pipe with a fluted
nozzle onto the cooled cupcakes.
Place the mousse
into a piping bag with a large round
nozzle and pipe round domes onto the biscuit bases.
Spoon
into a piping bag with a fine
nozzle and set aside.
Spoon the filling
into a piping bag fitted with a wide
nozzle.
Use the
nozzle to make a hole in the side of each doughnut and pipe a generous amount of filling
into the centre.
Spoon
into a piping bag fitted with a star
nozzle and pipe around the cake top (You can pipe design as per your choice).
Spoon the mixture
into a piping bag with a large circular
nozzle and pipe
into a silicon ice cube tray.
Mix the flour and water for the crosses and pour
into a small piping bag with a very small
nozzle.
Wet diapers are placed in this bag and soiled diapers are rinsed
into the toilet with a spray
nozzle called a diaper sprayer and placed in the bag.
And so you just simply turn on the water on the side of the toilet, hold the spray
nozzle and spray your diaper
into the toilet to get all the waste, the solid material off...
You use your mouth to gently suction mucus out of your child's nose and
into the
nozzle.
Some new concepts of plasma thrusters involve an expanding magnetic field called magnetic
nozzle (MN), where the plasma is spontaneously accelerated to propel a spacecraft, when exhausted
into space.
Then under finger pressure the polymer has to turn
into a liquid to come out of the
nozzle, and then it has to turn back
into a solid so it doesn't run down the bristles of the toothbrush.
Hospital staff wheeled him
into a room on a gurney, taped his eyes shut, strapped him onto a treatment table, then directed the machine to aim a
nozzle at him, unleashing the beam of energized subatomic particles at his pelvis.
To form the matrix, scientists push the liquid molecules through a printer
nozzle and then cross-link them
into gels of various consistencies through exposure to chemicals or stimuli such as light.
One minute later, the bubbly gas buildup busts the membrane and propels a piston
into the chamber that holds the protein, which then sprays out a
nozzle at one end of the capsule.
The researchers found that when the spray
nozzle was inserted deeper
into the nose (10 mm) that it performed better and that while the current instructions for the spray bottle recommend holding it at 22.5 degrees, drug transport was better at an angle of 35 - 45 degrees.
Those gasses flow
into the oxidizer section and the chemical reaction there creates tremendous heat and expanding gasses that flow through a
nozzle creating the bulk of the motor's thrust.
Waldman, a post-doctoral research associate, hit the controls and three spray
nozzles threw a fine mist up
into the wind.
The child blows through each nostril
into a
nozzle to inflate the balloon.
The hot gas produced is then allowed to escape through a narrow hole (the «throat»),
into a high - expansion ratio
nozzle.
A hybrid rocket propulsion system comprises propellants of two different states of matter, the most common configuration being a rocket engine composed of a solid propellant lining a combustion chamber
into which a liquid or gaseous propellant is injected so as to undergo a strong exothermic reaction to produce hot gas that is emitted through a De Laval
nozzle for propulsive purposes.
They mixed the nanotubes
into a plasma of helium ions, which they then blasted through a
nozzle and onto paper.
As the noise loops back towards the jet
nozzle, new turbulence is triggered, creating extremely large tones that can reach
into the 170 - decibel range and do structural damage to the aircraft in question.
The team used the Parker lab's proprietary rotary jet spinning technology — in which a rotating
nozzle extrudes an ECM solution
into nanofibers that wrap themselves around heart valve - shaped mandrels.
In rotary jet spinning technology, a rotating
nozzle extrudes a solution of extracellular matrix (ECM)
into nanofibers that wrap themselves around heart valve - shaped mandrels.
The heat and flames from the
nozzles come
into contact with the Jovian atmosphere, which is 90 percent hydrogen, and ignite it.
Generally speaking, this final operation in the process consists of inserting the fuel rods
into the support skeleton and finally installing
nozzles and support structures.
To fill, place your filling of choice
into a piping bag fitted with a Bismarck tip (a long thin piping tip used for doughnuts) or a small round piping
nozzle.
If using a spray bottle: insert the
nozzle of the spray bottle
into one nostril while covering the other.