Sentences with phrase «of epoxy»

I'm not looking forward to taping it all off again, plus I'm out of epoxy, so it will probably stay this way for awhile!
I was warned that if we went with reglazing, the smell of the epoxy would prevent us from being in the house for a few days.
Or can you prep as instructed and use any color of epoxy paint?
We just put in a tile counter top with 48 x 8in wood looking porcelain tile and there is a new type of epoxy grout that is completely stain proof and never needs to be sealed.
I wonder about the quantity of epoxy.
We have noted before that bisphenol A (BPA) is a key component of the epoxy liner in canned food and drink, so it should really be no surprise that new tests at Health Canada found it in pop cans.
A thin coat of epoxy makes it resistant to moisture and as smooth as conventional chips.
But that is BPA used in the manufacture of polycarbonates; Coke cans are lined with BPA used in the manufacture of epoxy.
Infiltration: Air barrier system is as follows: existing basement slab with two coats of epoxy paint; taped rigid insulation on inside of foundation walls; spray foam at the rim joist; taped housewrap on above grade walls; fully adhered membrane on existing roof sheathing; transitions between roof and above grade walls made by lapping membrane over the housewrap; other transitions made using sealant.
Composed of epoxy resin, quartz powder, and Fiberglas, the castings represent three different moments during the process of manufacturing a large - scale bronze bell.
Strewn throughout shallow plexiglas vessels, she covers these materials with Pepto - Bismol - colored hair - removing wax and a layer of epoxy resin.
But Fritsch's purple spinning wheel (Spinnrad / Spinning Wheel from 2017)-- rendered in fine detail, just like an antique would be, and topped off with what looked like a drooping heap of lush, white cotton (in fact, the entire sculpture is made of epoxy and polyester)-- was practically impossible to scale.
David Choi's Jumbo, a giant flowered piranha is a tour de force of epoxy and man - made materials, the classical sculptures carved out of Polystyrene insulation by Morgan Herrin put sensation sculptor Marc Quinn's 2005 exhibition The complete Marbles at Mary Boone to shame, (not that this is overly difficult, but Quinn did receive a baffling number of positive reviews for a very easy show) and Brian Basnett's tiny soft sculptures made from found plastics are whimsical, but not at the expense of being personal and warm.
The paint appears to be floating within layers of the epoxy resin, bringing light and depth to each piece.
Gueorguieva then created etching and litho plates for each structure, generating appropriate collage materials that were then draped over the metal and the thin layers of epoxy clay.
The two artists focus on experimentations with the conditions of vision, with Pashgian showing molds of epoxy adhesives and Wills showing myriad hued nylon and rayon threads against wood frames.
A similar ethic reveals itself in Sachs's own creations, which expose the traces of their making — drips of epoxy, runaway cuts — and underline the sheer expenditure of time involved.
Once we got a production line going, we would pull a few batches of the epoxy and leave the globs unmixed sitting in the powder on stand - by for when we needed to jump into the next batch.
The water would dissolve the powder on the surface of the epoxy and make it sticky again; this would help the adhesion of the material.
To lay this epoxy onto the foam, we would spray some water onto the foam then apply on a batch of epoxy.
One thing that survived the redesign was a faint hint of epoxy mixing with the new car smell.
Chassis  · Lotus designed lightweight structure of epoxy bonded aluminium alloy extrusions and lightweight steel rear subframe
Preventing the weave protruding the paint finish, Aston Martin employs a patented «surface veil» technology applying a 200 micron thick layer of epoxy glue to the carbon fibre, before the application of seven layers of paint producing a class A level of finish.
On top of the carbon weave, a patented Surface Veil process was applied a 200 micron layer of epoxy and glass to give the ultra smooth finish expected on an Aston Martin.
When the Elise was announced back in 1996, Lotus boasted the world's first production - car chassis made of epoxy - bonded aluminum extrusions.
It is also part of the epoxy resin that lines many metal cans, like those used for canned vegetables, fruits and meats.
Lewis and Brett G. Compton, a former postdoctoral fellow in her group, developed inks of epoxy resins, spiked with viscosity - enhancing nanoclay platelets and a compound called dimethyl methylphosphonate, and then added two types of fillers: tiny silicon carbide «whiskers» and discrete carbon fibers.
Bisphenol A (BPA) also serves as an essential ingredient of epoxy resins used to line food and beverage cans and even to seal cavity - prone teeth.
To see whether bees respond more to iridescence or a blue halo, researchers created sets of artificial flowers, pieces of epoxy resin with some kind of nanoscale - ridged array.
Some hard boards can be wooden paddle boards, but some are made of epoxy or foam.
After the heat - treating, it's time to test the knife for hardness on a machine called Rockwell scale, after which Van Wyk and Snyder attach what will become the handle to the blade and grind it down from a block of wood (or block of epoxied and compressed fabric, as the case may be).

Not exact matches

Step into the cooking facility and you'll see epoxy flooring in a deep Mediterranean blue — none of the blood red typically found on the floors of food - processing spaces.
Most brush makers use a specialized comb that removes leftover clippings, which did not fully set in the epoxy that secures the base of the knot.
Hmm, so you're telling me that a «heat shield» that was made of «special plastic» (as NASA called it back in the day), which was nothing but epoxy smeared over a ss honey comb «protected» the astros barreling into the upper atmosphere at hypersonic 5 miles / sec, or well over 30 times the velocity of a jumbo - jet and thru temperatures *** as quoted by NASA *** that are «10 times hotter than the surface of the sun», and then they «braked» with only a parachute to a safe splashdown?
The 80,000 - square - foot facility will have new, state - of - the - art equipment and washable walls, epoxy floors and a stainless steel drain.
Bisphenol A (BPA) is a compound used in epoxy resin to coat metal cans to maintain the safety and quality of the contents.
[Alexandria, Virginia, July 11, 2013] On July 11, 2013, the U.S. Food and Drug Administration (FDA) announced it is amending the food additive regulations to no longer provide for the use of Bisphenol A (BPA)- based epoxy resins as coatings in packaging for infant formula.
This innovation eliminates material traditionally found in epoxy or alternative coating systems that are of concern for many consumers.
BPA is a substance commonly used in the manufacture of polycarbonate baby bottles and the epoxy linings of food and beverage cans.
This innovation eliminates materials of concern — to consumers — traditionally found in epoxy or alternative coating systems.
In response to esther's comment: An epoxy resin water based lining coats the interior of Sigg bottles.
Bisphenol A (BPA) is a chemical that was used in polycarbonate plastic products and epoxy resin - based food can liners for decades to harden plastic, keep bacteria out of food, and prevent rust.
BPA is a chemical used primarily in the production of polycarbonate plastic and epoxy resins.
BPA is used in the production of clear, hard polycarbonate plastics and epoxy resins, often found inside food cans.
Whether BPA, also found in epoxy coatings in canned food, can hurt the development of a human fetus or a baby is still unclear.
Take some clear - drying epoxy glue and adhere the figurine to the inside of the lid and allow the glue to dry.
BPA is an industrial chemical found in many polycarbonate plastics as well as epoxy resins, which are used to coat the inside of food cans.
Although the FDA doesn't believe evidence of potential harm is sufficient to ban BPA from the food supply, the agency discourages use of BPA - polycarbonate or epoxy resins in baby bottles, sippy cups or packaging for infant formulas.
Unfortunately, the one - sided reporting so commonplace in the media has left consumers to conclude that rather than preventing health impacts, the epoxy liner itself causes problems because it contains infinitesimal amounts of BPA.»
a b c d e f g h i j k l m n o p q r s t u v w x y z