Performing responsibilities related to performance
of equipment calibration and maintenance per manufacturer's guidelines
Not exact matches
I could either spend my time doing the
calibrations of the old survey and write about why I didn't find anything, or I could put the old survey in the trash can and do it again with the new
equipment.
The lab personnel are more than willing to discuss the results
of our analysis should any company whose products are reported here choose to take issue with our laboratory procedures, suitability
of equipment used,
calibration standards, or experience
of the laboratory staff.
Of course, the table, so constructed, will only give the correct calibration if the tree - ring chronology which was used to construct it had placed each ring in the true calendar year in which it grew.Measurements made using specially designed, more elaborate apparatus and more astute sampling - handling techniques have yielded radiocarbon ages for anthracite greater than 70,000 radiocarbon years, the sensitivity limit of this equipmen
Of course, the table, so constructed, will only give the correct
calibration if the tree - ring chronology which was used to construct it had placed each ring in the true calendar year in which it grew.Measurements made using specially designed, more elaborate apparatus and more astute sampling - handling techniques have yielded radiocarbon ages for anthracite greater than 70,000 radiocarbon years, the sensitivity limit
of this equipmen
of this
equipment.
At work I perform
calibrations of test
equipment used in various parts
of the part during maintenance tasks.
Porsche Active Suspension Management (PASM) will be standard
equipment on the Cayenne S and can include, as an option, a new three - chamber air suspension increases air volume versus the previous system and offers a finer degree
of specific comfort
calibration through the addition
of a third air chamber.
Taken from a stereoscopic
calibration test card used by cinema projectionists to focus their
equipment, the image in Nightlight, this new edition by Lucy Raven is backlit, slowly changing over the course
of the day.
Improvements in methods and
equipment, processes
of maintenance and
calibration as well as a vastly better understanding
of measurement methods have reduced the measurement errors by an order
of magnitude over those years.
Radiosondes (I've launched many
of them and was a technician responsible for
calibration and repair
of the
equipment used in the early 1970's) return a constant stream
of temperature, pressure, and humidity.
That were the measurements
of the
calibration gases used to calibrate the
equipment for CO2 measurements in the atmosphere, not actual CO2 measurements in Siowa!
«Magic with numbers» is always accomplished by either inventing your data or massaging what data you have, unreliable at best given the time spans involved the
equipment available, the precision, repeatable accuracy and
calibration of the
equipment used to collect the data along with the number
of people doing the measurements, all
of which are accomplished somewhat differently.
The problem is that 1 degree is well within the
calibration tolerances
of the
equipment used to measure temperature.
Performed lab bench checks with analysis repair and
calibration of avionics electrical
equipment.
Performed contamination surveys, air and water analysis, and
calibration of survey
equipment for Michigan University.
I possess fundamental knowledge
of electrical and electronic systems, along with deep insight into handling installation,
calibration and testing
of components,
equipment and units.
Performed inspection, testing, troubleshooting, repair, overhaul, modification,
calibration, installation, and / or alignment
of various types
of complex aircraft electronic and electro - mechanical
equipment which includes but is not limited to generators, motors, landing gear, flight control and lighting, power plant, valves, hydraulics, fuel, and ignition systems.
Replaced and matched parts on selected types
of bearings and performed
calibration, precision gauging, and testing on bearings with specialized
equipment.
Perform ISO 17025 accredited
calibration of temperature sensors and electrical testing
equipment
Lab Technician II — TRL Plasma Laboratories — January 2013 — Present • Monitor the heat sealing and aseptic sampling
of plasma units; place units
of plasma into freezer in timely manner in order to ensure quality
of product • Label plasma samples and units properly and store according to policy; manage an average
of 50 different plasma units on a regular basis • Evaluate refrigerator and freezer temperatures ad inform supervisor if
equipment is malfunctioning • Maintain efficient and clean work environment and ensure inventory is stocked properly; answer phones and answer questions or transfer calls to appropriate departmentLab Technician I — ABC Medical Technologies, Inc. — May 2007 — January 2013 • Operated laboratory
equipment, such as cell counters and microscopes, to analyze urine, blood, and tissue samples; recorded both normal and abnormal findings; had less than a.1 percent margin
of error in sample findings • Used computerized instruments and automated
equipment to perform multiple tests at one time; maintained
calibration and proper function
of equipment on a regular basis • Entered data from tests into physician reports; discussed abnormal results with supervisor and re-ran tests before logging data into patient's medical record
Lab Technician — ABO Laboratories — May 2012 — Present • Execute a variety
of laboratory assays and tests in accordance with established procedures, policies, and regulations; ensure samples are properly labeled and stored • Study blood samples for transfusions and record the blood group, number
of cells, blood type, cell morphology, and other blood type compatibility • Perform procedural and instrument
calibrations, document all quality control activities, and perform regular
equipment maintenance • Identify problems that may negatively affect test results or performance; correct issues immediately and properly notify supervisor • Maintain meticulous records and demonstrate that the testing
of samples is done in the same manner as patient specimens; promote cost - effective testing practices and reduce waste by 10 percent
Provided testing,
calibration, repair and troubleshooting
of automated manufacturing machines and analog / digital
equipment for before each day's production.
As a Resident Service Technician, you will be responsible for the installation,
calibration and service
of a customer's weighing
equipment in your territory.
Maintained control
of measuring and test
equipment to include
calibration scheduling and document control
Calibration, maintenance and routine repair
of various production testing and laboratory
equipment.
Create Resume Ashley Sims 100 Broadway LaneNew Parkland, CA, 91010Cell: (555) 987-1234
[email protected] Professional Summary Meticulous Biomedical
Equipment Technician with passion for installation, maintenance, diagnostic troubleshooting, repair, calibration and modification of biomedical equipment according to organizational policies and pr
Equipment Technician with passion for installation, maintenance, diagnostic troubleshooting, repair,
calibration and modification
of biomedical
equipment according to organizational policies and pr
equipment according to organizational policies and procedures.
Trained and instructed fellow technicians in work area and managed an inventory
of calibration required tools, RF test
equipment, and emergency use tools.
Provide accurate documentation
of results,
equipment maintenance, and
calibration in laboratory logbooks, spreadsheets, LIMS, and certificates
of analysis.
• Assist the Optometrist in the examination and treatment
of patients • Perform visual tests and procedures • Prepare patients and act as special surgical assistant in clinical procedures • Apply ocular dressings, perform suture removal, and obtain eye cultures • Record patient case history, conduct visual screening tests including pupillary testing, visual acuity, cover test, color vision and depth perception • Take ophthalmic photographs • Perform cyclic maintenance and
calibration checks on clinic diagnostic
equipment
Functional knowledge
of wiring line and low voltage to heating and cooling
equipment within commercial and residential arenas • Hands - on experience in installing copper refrigerant lines and flex duct systems • Skilled in understanding and recording readings on HVAC machines, aimed at
calibration and troubleshooting • Able to perform preventative and general maintenance activities on HVAC systems, keeping in mind longevity and wear and tear
Assist with set - up
of photographic studio,
calibration and maintenance
of equipment and marketing display set - up.
• Assisted in the setting up and
calibration of iron fabrication machines and
equipment.
Solid history
of installation,
calibration, maintenance, troubleshooting and use
of dialysis, heart monitoring, and other testing and diagnostic
equipment.
Set up and operate a variety
of measuring and monitoring
equipment to ensure repeatability
of data during
calibration testing ***** Involved the measurement
of temperature, pressure, mass, force, AC / DC voltage, frequency, resistance and capacitance ***** Utilized common analog and digital test
equipment to test individual subsystems
of inspection, measuring, and test
equipment.
SUMMARY
OF QUALIFICATION * Firsthand operation and or maintenance / calibration of: Modern Dairy Processing & Lab equipment -(High Temperature Short Time (Pasteurizer), STLR, Chart Recorders, RTD, Thermocouple instruments, Plate Heat Ex
OF QUALIFICATION * Firsthand operation and or maintenance /
calibration of: Modern Dairy Processing & Lab equipment -(High Temperature Short Time (Pasteurizer), STLR, Chart Recorders, RTD, Thermocouple instruments, Plate Heat Ex
of: Modern Dairy Processing & Lab
equipment -(High Temperature Short Time (Pasteurizer), STLR, Chart Recorders, RTD, Thermocouple instruments, Plate Heat Exc.
Monitored and supported operations, inspection programs, and maintenance /
calibrations of equipment valued over $ 3 million.
Calibration of equipment.
Skilled engineer with 20 + years
of experience in the areas
of various fields
of electronic systems, analog and digital electronics, instrumentation, testing, prototyping,
calibration and diagnostic
equipment (oscilloscopes, DMM, signal generators and specialized test apparatus incl.
He is experienced in electrical testing and installation, instrumentation,
equipment calibration, microelectronics fabrication, maintenance
of electrical and electronic
equipment, systems, and components.
Skilled trainer and facilitator
of standard operating procedures including quality, safety, OSHA guidelines,
equipment calibration, laboratory standards, and processes.
• Developed ways to improve performance
of transmitters, satellite receivers and other related
equipments • Ensured safety
of all workers by conducting regular
calibration and maintenance
of all broadcasting
equipments.
Prepare and repair Hemodialysis
equipment for treatments and use; Monitor
calibrations of machines and related
equipment as per manufacturer's guidelines;...
Performed a variety
of complex technical functions related to the support
of engineering activities such as set up, operation, maintenance, modification, circuit testing,
calibration and troubleshooting
of electronic and electromechanical systems, experimental design circuitry, prototype modes and specialized test
equipment.
Strong background in troubleshooting, installation,
calibration, and configuration
of medical
equipment such as X-ray, Sonogram and Fluoroscopy.
Professional Experience Pfizer (Andover, MA) 2001 — 2011
Calibration and Senior Manufacturing Technician • Perform and oversee regular maintenance, emergency repair, and testing on a variety
of equipment • Utilize thermometers, PH and Conductivity Meters, temperature elements, TOC analyzers and Pressure Transmitters • Proficient in use
of Centrifuges, Autoclaves, Washers, UF and MF skids, Rockers, Mixers, Shakers, CIP and SIP systems • Consistently recognized for team leadership, technical skills, and dedication to company objectives
Toyota Engineering and Manufacturing North America (Princeton, IN) 10/2001 — 5/2010 Technician / Skilled Maintenance Team Leader • Provided support and technical expertise on Allen Bradley PLC - 5 and Control Logic, as well as designed new screens for HMI using RSView and mapped all data and alarms needed for monitoring production
equipment • Programmed PLC's using Rockwell software as required by production, utilizing PLC as a troubleshooting tool to locate and repair process problems • Repaired and maintained all three phase medium and low voltage motors, programming medium voltage control relays to meet manufacturer specifications and monitor applicable data from motors as well as engineering data and motor manufacturing parameters into VFD's • Established PM schedules for maintaining floor conveyors, robots, RFID, air handling, sludge, paint mix room, and lifters, assisting T / M's with performing preventative maintenance on
equipment • Ensured
calibration of environmental
equipment to maintain state and federal guidelines, performing the
calibration procedures and repair
of micrometers, calipers, and profilometers as required by ISO standards • Identified and developed countermeasures to manufacturing - related problems with
equipment, monitoring corrective actions and resolution implementation to ensure problems were below 2 %
of operational availability • Review associated work instructions for changes as needed to maintain quality, safety, and environmental standards, while planning and coordinating weekly safety meetings and training for team members
Guidant Corporation (St. Paul, MN) 1999 — 2005 Reliability Technician • Responsible for analysis, maintenance, and repair
of varied systems and devices • Designed and implemented procedures to reduce testing time and increase productivity • Skilled in operation, maintenance and repair
of RF based technology • Maintained tools and testing
equipment to ensure accurate
calibration
Professional Profile Self - motivated senior manufacturing technician with significant years
of relevant experience, related proficiencies and a background in electronic
equipment testing,
calibration, and troubleshooting.
Used various complex diagnostic
equipment (TMDE) to assess and establish fault and location
of malfunctions, including multi-meters, signal generators, spectrum analyzers, for measuring,
calibration and diagnostic testing
of equipment.
Describe your ability to work on state
of the art
equipment in regulated environments and show how you ensure that routine maintenance and
calibration is planned and performed.
Setup, perform, and maintain
calibration of environmental
equipment to maintain state and federal guidelines.