It consists
of hydraulic pistons at the top of each wheel's coil spring and is controlled by a computer monitoring 13 sensors: 4 in the wheels to gauge level and 9 around the body to detect movement.
Not exact matches
Most
of these rowers have handles that are connected to
hydraulic pistons that create resistance.
When the breaks are applied using
hydraulics the
piston has some degree
of freedom to move beyond the length
of the screw setup.
It is a U-shaped device with a
piston or
pistons on one or both sides
of the U and works like a small
hydraulic lamp designed to grip the brake rotor.
The interior wood - tone trim changed to a lighter shade, glove compartment and storage bins were now covered in charcoal gray material (formerly black), the door - mounted power window switch panels now matched the interior color (previously, they were high - gloss wood - tone), recessed seat tethers allowed for secure installation
of child seats in all three rear seat positions, and the trunk hinges were now supported using
hydraulic pistons.
The in - line layout
of these two clutches (patent pending) along the transmission axle, together with the
hydraulic control
piston installed on the inner face
of the clutch disc, results in a more compact configuration which also minimizes lateral intrusions in the direction
of the transversely mounted engine.
And, if required, we can dispense with electric solenoids and
hydraulic pistons altogether and employ a purely mechanical means for shift control, making use
of direct linkage from the throttle to alter the shift point.
The operating principle
of the system, applied to intake valves, is the following: a
piston, moved by a mechanical intake cam, is connected to the intake valve through a
hydraulic chamber, which is controlled by a normally open on / off solenoid valve.
These actuators have
hydraulic pistons controlled by
hydraulic solenoid valves which provide proportional control
of the
pistons using pulse width modulation (PWM).
-- A solid body structure as stiff as any in the global midsize sedan market, allowing for precise tuning and dynamic vehicle control — A premium steering gear that ensures smooth, precise responsiveness and on - center feel — Proven and continuously refined MacPherson strut front and mutli - link rear suspensions — Large, ventilated front disc and solid rear disc brakes, clamped on by dual -
piston front and single -
piston rear aluminum calipers, which are expected to deliver best - in - class stopping distance — An isolated engine cradle for tuned, refined feedback, without noise or vibration — Fuel - saving electric power rack - and - pinion variable - effort power steering, resulting in effortless low - speed maneuvers and a higher degree
of steering feel at higher speeds — Chassis control technologies include four - channel anti-lock brakes, full - function traction control, four - corner electronic stability control, electronic brake force distribution, brake assist system, corner brake control,
hydraulic brake fade assist and drag torque control.
Type: R Cubic Inches: over 440 Bore: 4.32 inches plus.40 over, total
of 4.72 Block Modifications: bored.040 over Block: Chrysler Bore x Stroke: stock 4.72 x 3.75 Rods: stock, cast
Pistons: Speed - Pro, 9.8:1 compression Crankshaft: stock steel Cam: Comp Cams
hydraulic Lift:.470 at.050 224 Valves: Milodon, 2.14 intake, 1.81 exhaust Valvesprings: Comp Cams Rocker Arm: stock Intake Manifold: Edelbrock Aluminum Six Pack Carburetors: Holley Six Pack Distributor: Mallory Exhaust: Chrysler RB Hi - Performance Muffler: Spin Tech Exhaust Pipes: Muffler Tech Performance Inlet / Outlet Size: 2.50 inches Exhaust: aluminized 2.50 inches Exhaust Tips: stainless steel tips with YearOne red inserts Engine: built by VanGordon Racing Engines (Upland, CA)
The newly choreographed hood has resulted in an opening time
of only 14 seconds due to a new five -
piston hydraulic pump.
Also see Steel Braided Hoses Brake Lining Material: A composite
of matrix binder, metallic or ceramic particles and friction material that also coats the disc surface Brake Pads: The pad consists
of a steel backing that fits into the locking mechanism
of the calipers and a layer
of about 10 mm
of friction brake lining Brake
pistons: Is a
hydraulic actuated
piston that transfers the
hydraulic pressure from the master brake pump to cause the brake pad to bind with the disc.
A wrap - around 45.7 - inch wide tailgate lifts on
hydraulic pistons and can be programmed to rise to the height
of your choice.
Highlights
of the application - specific mill include Edelbrock Performer RPM heads, electronic ignition, a 4340 crank, Eagle H - beam rods, a COMP
hydraulic cam, Speed Pro hypereutectic
pistons and a 750cfm Demon carburetor.
A pressure relief valve prevents a dangerous build - up
of pressure when the
hydraulic cylinder's
piston reaches the end
of its stroke.
The braking system in your vehicle uses a pressurized flow
of hydraulic fluid to apply pressure to a
piston in the Chrysler brake caliper, causing it to squeeze the brake pads into contact with the brake disc.
A wrap - around 45.7 - inch wide tailgate lifts on
hydraulic pistons and, fortunately for anyone under 5 foot 4 inches, can be programmed to rise to the height
of your choice.
A wrap - around 45.7 - inch wide tailgate lifts on
hydraulic pistons and, fortunately for anyone under five - feet, four - inches tall, can be programmed to rise to the height
of your choice.
The company's wave - power system acts as a sort
of hydraulic pump that converts the vertical motion
of waves into pressurized sea water, which in turn drives a
piston that forces sea water through a turbine.
CIANBRO, Dulles, VA (December 2011 — February 2013) Apprentice Mechanic • Assisted in problem diagnosis and rectification • Accompanied the heavy equipment mechanic to various sites for equipment repair and inspection • Kept preventive maintenance logs and inventories for all services provided • Conducted periodic preventive maintenance
of company's and clients» heavy vehicles • Serviced, repaired and cleaned diesel engines and
hydraulic equipment • Serviced brakes and transitions, aligned steering and replaced damaged
pistons, bearings and clutches