Sentences with phrase «of the alloys on»

You can add alloy wheels to the S or increase the size of the alloys on other models.

To help this vehicle look better... It has a nice set of Alloys on it!

Not exact matches

Those alloys, a series of chemicals limited in mineable concentration on Earth, are key to the production of many modern technologies, everything from smart phones to fighter jets.

The two keynote addresses, from Brian Krzanich on Tuesday and Murthy Renduchintala and Diane Bryant on Wednesday, dealt more with the broader issues Intel is exploring within the Internet of Things, such as the buzzy Project Alloy headset, 5G mobile connectivity and silicon photonics in the data center.

7) «The period is marked by technological advances in pottery production, including the introduction and dominant utilization of the fast wheel and the appearance of efficient, tow - tiered pottery kilns; metallurgy with deliberate alloying and evidence for local production in the form of copper smelting furnaces on the outskirts of Khapuz - depe; stone working; and a development of wheeled vehicles drawn by Bactrian camels and possible bulls as indicated by terra - cotta models.»

The unit is housed in a cast aluminum / alloy case and lasts up to four years on a set of batteries.

If you plan to do a lot of mountain biking on moderate terrains, you will be happy you made the investment in this aluminum alloy bike.

Then liquid channels penetrate the material forming a rich variety of structures with different topologies depending on the initial composition of the alloy.

Then, depending on the initial composition of the alloy and diffusion, the liquid metal can infiltrate the alloy resulting in two interpenetrating connected phases, leading to metal nanostructures with desirable properties.

Researchers then place a layer of copper - carbon (Cu - 2.0 atomic percent C) alloy on top of the titanium nitride, again using domain matching epitaxy.

The team also focused on the effect on the alloy structure of the incorporation of nickel into the iron crystal.

They show that large - scale alloys behave differently than found by previous studies, which focused on samples of the order of thousands of atoms.

But Bowyer plans instead on using a low - melting point metal alloy of bismuth, lead, tin and cadmium that can be squirted from a heated syringe to form circuits.

This week, after evaluating two Fermilab proposals, CERN opted for welding on pistonlike, aluminum - jacketed rods composed of a stiff metal alloy to secure each eight - ton magnet in its housing, says Fermilab spokesperson Judy Jackson.

As the team reports in Science on June 2, they found it in an alloy of cobalt and phosphorus, an amalgam already in use as an anticorrosion coating for plastic and metal parts found in everything from faucets to circuit boards.

That also means GE could spend less on the metal materials; the company currently spends some $ 4 billion annually on the purchase of metals and alloys.

Following up on the inspectors» findings, a National Institute of Standards and Technology (NIST) laboratory study has demonstrated severe corrosion — rapidly eating through 1 millimeter of wall thickness per year — on steel alloy samples exposed to ethanol and acetic acid vapors.

Chewing on a bran muffin (there are full kitchens and abundant munchies in all four of the El Segundo buildings), Musk waves a hand at the production floor, where technicians built the Falcon I's space - grade 2219 aluminum alloy fuel tank, its first - stage engine, dubbed Merlin, and the upper - stage engine, called Kestrel.

Optical micrographs of severe corrosion on steel alloy samples exposed to ethanol and acetic acid vapors — conditions typical of underground gas storage tanks — after 355 hours, 643 hours, and 932 hours.

The research dates back to the spring of 2014, when WPI was named the lead institution on a $ 7.4 million, multi-university award from the U.S. Army that supported the development of new metallurgical methods and new lightweight alloys to help the military build more effective and durable vehicles and systems.

ORNL co-authors of the paper, titled «Structure and Compositional Dependence on the CdTexSe1 - x Alloy Layer Photoactivity in CdTe - based Solar Cells,» are Wei Guo, Karren More and Donovan Leonard.

It turns out that the difference between good glass formers and bad ones depends on the number and energies of unstable crystal structures that «compete» with the ground state while the alloy cools down.

The pilot plant will enable TerraPower to assess the impact of radiation damage on the specialized stainless steel alloy, to document its survival capabilities.

The prowess of the Oxus metalworkers — who used tin alloys and delicate combinations of gold and silver — were on par with the skills of their more famous contemporaries in Egypt, Mesopotamia, and the Indus Valley, Lamberg - Karlovsky says.

Dr Sarah Warnes, lead author of the new research, explains: «Our latest research shows that in simulated fingertip contamination of surfaces with millions of MRSA or MSSA, the cells can remain alive for long periods on non-antimicrobial surfaces — such as stainless steel — but are killed even more rapidly than droplet contamination on copper and copper alloys.

Conventional processing methods use a high - temperature blast furnace to heat the iron ore and other compounds to remove oxygen and yield a desired alloy, a method that creates a lot of carbon dioxide, according to a report last year from U.S. EPA on greenhouse gas emissions from the iron and steel sector.

In addition, Millstone's demonstration is unique in that she was able to show — for the first time — a continuously tunable composition for nanoparticle alloys; this means the ratio of materials can be altered based on need.

«All of the syngas goes into heat or energy production,» Synfuels chemist Ed Peterson says, and the company cuts down on cost by using such by - products to make energy and employing components built with cheaper steel alloyed with carbon as well as easy to maintain low pressures.

Wang's research group designed a five - metal catalyst based on these high - entropy - alloy nanoparticles and demonstrated superior catalytic performance for selective oxidation of ammonia to nitrogen oxide, a reaction used by the chemical industry to produce nitric acid, an important chemical in the large - scale production of fertilizers and other products.

In a neutral salt spray context, the composite has a corrosion resistance of over 1000 hours on low - alloy steel.

Based on the comprehensive measurement data and new visualisation methods for these data, the researchers can thus gain a grasp of phase evolution in complex alloys within a much shorter space of time than with traditional methods.

On copper, and a range of copper alloys — collectively termed «antimicrobial copper» — the coronavirus was rapidly inactivated (within a few minutes, for simulated fingertip contamination).

In metal - on - metal pairings, both the shell and head of an implant consist of a cobalt - chromium - molybdenum alloy.

«We're interested in the radiation damage case in particular, but other applications might include studying low - temperature phase change materials, or real - time monitoring of oxide layer formation on steel alloys,» he said.

The doping could be accomplished by incorporating a small amount of the dopant metal into the initial zirconium alloy matrix, so that this in turn gets incorporated into the oxidation layer that naturally forms on the metal, the team says.

The team stresses that what they found is likely to be a general approach that can be applied to all kinds of alloys that form oxidation layers on their surfaces, as most do.

The other strategy is based on different elements, including niobium, that propel hydrogen out of the oxide surface and protect the underlying zirconium alloy.

They synthesized small quantities of realistic catalysts, such as platinum - copper single atom alloy nanoparticles supported on an alumina substrate, and then tested them under industrial pressure and temperatures.

According to this model, the size of the bandgap and the wavelength of the emitted light depend on how many impurities the silicon contains, and the luminescence is tuned by alloying, with elements such as oxygen or carbon, for example.

By altering the concentrations in the alloy, the researchers could precisely manipulate, even on the same substrate in the same batch, the orientation of the nanowires.

The primary focus of future research efforts on these alloys is increasing the weight of the materials to make them more resistant to impacts.

APT produced 3 - D atom maps of all alloy constituents (shown in the IEEE Transactions on Magnetics cover).

What's Next: The researchers are reproducing this oxidation on high - purity, nickel - chromium binary alloys of variable compositions to isolate surface and internal oxidation processes.

Based on what the algorithms learned in this first round, the scientists crafted two sets of sample alloys using two different methods, allowing them to test how manufacturing methods affect whether an alloy morphs into a glass.

Departing from studies of organometallics, he began studying the role of size, composition and morphology on the electrochemical activity of complex alloy nanoparticles for fuel cell cathodes and developed new instrumental capabilities for his work.

This capability involves the exposure of advanced production or storage alloys to hydrogen atmospheres along with extended analysis capabilities on physical and microstructural evolution along with mechanical performance.

Elucidation of high temperature deformation mechanisms of light weight alloys, high strain rate and / or low temperature superplasticity utilizing dynamic recrystallization and microstructural influence on the fatigue properties of high strength steels have also been investigated.

Schwartz is an accomplished researcher whose work has focused on plutonium aging and alloys, advanced characterization, and the dynamic properties of materials.

Similarly, South Africa has launched a programme for the creation of centres of excellence that is designed to promote new knowledge and develop collaborative research projects on such critical issues as biomedical treatment for tuberculosis; research and development of strong materials (for example, alloys, metal oxides, ceramics and diamonds that retain their distinctive properties under extreme conditions); the impact of invasive species on biodiversity, ecosystems and tourism; and examinations of chemical catalysis, primarily for the conversion of gas to liquid fuels.

The beautiful geometric design features 6 alloy dishes arranged... on a wood base, each labeled in Hebrew and English with one of the ceremonial foods.