Sentences with phrase «of wheel bearing»

Replacement of the wheel bearing may cost $ 350 - $ 480.

Tip: Have lots of wheel bearing grease on hand.

The replacement of the wheel bearing costs from $ 280 to $ 400.

There are two kinds of wheel bearing designs: 1) the bearings can be serviced by taking them apart, cleaning them, and re-packing them with fresh grease, or 2) the wheel bearing is of a «sealed» design that requires no service other than replacement when found to be defective.

When weaving on the road make a note of the wheel bearing noise.

While you're in there, assess the state of the wheel bearings to ensure they are in good shape.

I took my car back to the shop, they replaced the set of wheel bearings on the other wheel.

As technology improved, newer vehicle were equipped with a «maintenance free» single wheel bearing that was designed to extend the life of wheel bearings without having to be serviced.

The condition of the wheel bearings, control arm bushings, tie rod ends,...

A droning noise from the rear could be caused by one of the wheel bearings, or the carrier bearings for the differential itself.

Further improvements have been made in various areas, including the car's directional stability, the friction coefficient of the wheel bearings, tire noise and weight, which has been reduced by 4.4 pounds on the front suspension alone.

How can you tell what type of wheel bearings are in your vehicle?

Not exact matches

So he recruited fellow University of Waterloo engineering student Devon Galloway as another set of hands at the wheel and to keep him from getting bored.

Additionally, the hub, nuts, bearings, buttons, lever, horn contact and other components of the steering wheel are also products of the mold release process.

«It's pretty awesome to think that a virtual currency born only a few years ago can put people behind the wheel of a $ 200,000 sports car today.»

There are many choices of skates, as well as wheels, bearings, brakes and spacers.

Another aspect of inline skates is bearing choice; in inline skates, two bearings are in each wheel.

And that's what it does for a lot of people... it helps us bear the void in the universe - the motion of the planets, their imperturbable wheeling through space, their silent indifference to the place of our pain.

Then mediocre miracle of mediocre miracles, Grace gets to take the wheel in the form of a Jewish baby born into poverty.

I suppose most of us would point to some measure of minimum functionality (viability), like having wheels and / or a motor, but some might insist on the need for windshield wipers or say it's not fully a car until it rolls out onto the street (is born).

Ferrari didn't even get to enjoy victory as just a few laps from the end a wheel bearing put Alesi out of the race as well.

Moneyball was about Billy Beane reinventing a wheel that was used to skin cats, but that's only because it would have been boring to sit through two hours of me explaining why it was a huge advantage to have an underpaid Mark Mulder, Tim Hudson, and Barry Zito.

At the funeral the palms of Nick's hands still bore the imprint of the steering wheel.

So if Van Gaal is on borrowed time, it isn't just because the team are boring or that they are out of the Champions League or that he looks increasingly like a bus driver who has discovered that, while travelling at pace on a winding road, there is no steering wheel.

Each wheel is also lined with premium ball bearings for easy movement of the stroller.

The day after Wesley was born, a nurse wheeled the whooshing machine into my room, along with a bag of equipment — rubber tubing, plastic flanges, valves and membranes, bottles of various sizes — and showed me how to hook all the pieces together with the machine, to create a pump that mimics a baby's suctioning.

• Lightweight aluminum frame • Slim step - through design • Weighs only 11 pounds • Natural, no - air rubber tires with sturdy honeycomb design • Adjustable seat post and handlebars with quick - release • Spoked wheels on aluminum rims • Wheel size of 12» • Ball bearing wheel hubs and headset for smooth handling • Low seat height at 12», ranges up to 16» for taller kids • Stand - over height at 12.5» • Comfortable hand grips and seat • 50 - pound weight capacity • Comes fully asseWheel size of 12» • Ball bearing wheel hubs and headset for smooth handling • Low seat height at 12», ranges up to 16» for taller kids • Stand - over height at 12.5» • Comfortable hand grips and seat • 50 - pound weight capacity • Comes fully assewheel hubs and headset for smooth handling • Low seat height at 12», ranges up to 16» for taller kids • Stand - over height at 12.5» • Comfortable hand grips and seat • 50 - pound weight capacity • Comes fully assembled

It has a patented quick fold technology, a reclining seating system that allows you to choose up to 16 unique combinations, a padded recline seat, a front wheel suspension system and sealed ball bearings, two sets of front and rear pneumatic tires on polymer wheels, an under seat storage compartment.

The stroller has a number of ideal features including these: a patented quick fold system, a hand operated braking system, a front wheel suspension, sealed ball bearings, two sets of air tight pneumatic wheel (12» rear and 8» front).

Large wheels with sealed bearings make it traverse bumpy terrain with ease without compromising the comfort of young passengers.

The stroller contains 12 inch forever - air rear wheels and 8 inch lightweight front wheels with front wheel suspension and sealed ball bearings which support the comfortable sleep of the children in the basket while moving anywhere.

Consider wheel type of stroller that you intend to buy with purpose and bearing in mind which kind of terrain you will be moving about.

The wheels have sealed bearings which provide durability and a smooth ride in all kinds of terrain.

Apply lubricate to the brakes, axle and bearings of the wheels.

It boasts of polyurethane wheels with ball bearings and suspension allow for 360 degree agility, less effort in pushing and more comfort for baby.

The sealed bearing wheels make it possible for you to push the load of three children.

The wheels are large with sealed bearing and help in the stability of the stroller.

The rear wheels are also specially designed with ball - bearings to help you have an optimal running experience while the lightweight design of the frame keeps you from dragging.

State of the art suspension and ball bearings in the wheels ensure a smooth ride, even on some rougher terrain!

It glides along and turns on a dime because of sealed ball bearings in the wheels.

It is very hard to turn the stroller while walking because the swivel wheels get stuck for some reason when they bear the weight of the baby.

Pros of the Peg - Perego strollers As mentioned above for every stroller, they are light weight and easy to maneuver as most of them come with ball bearings in their wheels.

A fixture of the northern sky, the Big and Little Dippers (also known as Ursa Major and Ursa Minor, Little Bear and Big Bear) swing around the north star Polaris like riders on a Ferris wheel.

The Teshie - born Rev. Martey, has been in the news for collecting US$ 100, 000 and 4 - wheel Toyota Land Cruiser from a flagbearer of an opposition political party to lead attacks on the John Mahama government under the guise of a voice of God.

The bearings are made with high carbon chromium steel and the wheels themselves are made with polyurethane to get the right level of durability.

You'll be able to use any kind of standard bearings with these wheels and the softness of the wheel means that you'll get a quiet ride, though you'll need to push a little bit more to get you started when you're first taking off.

These wheels are lightweight and can be easily attached with your favorite type of bearings.

Covered with red material and featuring red wheels, you'll never get bored of using this unique creeper.

Wheel Size: Some of the products on our list are just simple trucks while others are combination kits that include wheels, bearings, and hardware.

Similar ideas occurred to the builders of Stonehenge as early as 1800 B.C. and to the craftsmen who constructed the cylindrical - shaped bearings on the wheel hubsof wagons around 100 B.C. (On these wagons the axle turned with the wheels, so the bearings enabled the axle to roll against the wagon chassis.)