I knew what colors I wanted to use but first we needed to address her broken bones, a bit
of wood putty, wood glue and some clamps set her up right and proper.
I proceeded to cut some boards, screw them together to make the sign, add a bit
of wood putty, and primed the whole thing to prevent bleedthrough from the knots in the pine.
Answer: Probably - but there are so many different kinds
of wood putty that use different ingredients, it is best to have the container with you and call a poison control specialist like these people: ASPCA Animal Poison Control Center Phone Number: (888) 426-4435.
Not exact matches
Out
of the blue 2014 cast and polished bronze from wooden burl, extruded aluminum, cast acqua resin,
wood,
wood putty, papier mâché, foam, Japanese paper, aluminum screening, acrylic paint, chalk 25 3/4 x 40 1/2 x 12 inches
• Inspect worksites and ensure that they are properly cleaned and cleared
of debris • Measure floor area to determine the amount
of materials that will be needed to cover it • Sweep and chip dirt and irregularities from existing base surfaces and fill cracks with
putty and plaster • Coordinate efforts with suppliers / vendors to procure materials and equipment for floor laying • Cut and shape floor materials such as
wood and tiles so that they fit into the designated space • Install floor coverings using adhesives and cement and check them to ensure that they are properly fixed • Fill in areas between tiles with plaster to ensure a clean and even look • Cleanup leftover materials such as adhesives and plaster • Repair existing tiled or wooden floors by replacing damaged or rotted tiles with new ones • Provide customers with information on involved costs and handle work duties according to provided budgets
I could have glued it down and filled - in with
wood putty, but I had recently read about a great method
of using hot towels to remove veneer..
A country palette
of olive,
putty, washed greys and natural
wood give this artisan kitchen area a rustic aesthetic.
This stain also worked with a can
of Dap
wood putty I found that is over 20 yrs.
The hubs filled the holes in with
wood putty - several times — and a marathon
of sanding commenced!
I filled all
of the damage with
wood putty, then sanded it down and things were looking good....
What kind
of caulk did you use and did you use
wood putty for the knots and nail holes?
Then I applied the
wood filler to all
of the scratches using a
putty knife to create a smooth finish.
One
of the legs was chewed about a quarter
of the way through by rats, but a little
wood putty and paint fixed it right up (and my BIL and SIL never have to know... unless they read my comments, lol).
I think you could fill in the crevices with
wood putty / filler stuff and still keep the appearance
of the planks.
4) Once the pine flooring was down we
wood putty - ed some
of the knots to fill in a few
of the holes and rough patches in the
wood.
When you paint your object, what I do is wash off parts
of the motif with a damp cloth, and the
putty appears to look like
wood painted.
I used
wood filler to fill these holes, along with adding
wood putty to the sides
of the plywood to give it a finished appearance.