Sentences with word «ohmmeter»

Worked with voltages up to 480 - volt 3 - phase systems using ohmmeters, voltmeters and oscilloscopes to ensure compatibility and safety of the system

Use electrical and electronic testing equipment such as ohmmeters ammeters oscilloscopes and microwave testing equipment.

Repairing and Maintaining Electronic Equipment Making Decisions and Solving Problems Training and Teaching Others Communicating with Supervisors, Peers, or Subordinates Thinking Creatively Experience with: Component test sets, Diagonal cutting pliers, Digital ammeters, Digital ohmmeters, Electric soldering irons, Frequency meters.

Examine electrical system of circuits in electrical wiring, equipment, or fixtures, using testing devices, like ohmmeters, voltmeters, or oscilloscopes, to confirm compatibility and safety of system

Tested electrical characteristics, such as voltage, resistance and phases in circuits, using voltmeters ohmmeters and phase rotation indicators.

Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system.

One of the primary tools used to measure the health of these membranes is transepithelial electrical resistance (TEER), an ohmmeter with microscopic filament attachments that allows you to measure both the inside and outside of the membrane, giving you an indication of the resistance across the epithelial layer.

If you have a multimeter, set the ohmmeter to the smallest setting.

I would check pin 4 with an ohmmeter even with the 5 volts coming out of the PCM.

If you want to make sure, remove the battery terminal, and use an ohmmeter to measure the resistance between the battery terminal and the other side of the fuse.

Test with an ohmmeter for an open circuit.

You could possibly test the gas pedal by unplugging it and checking for even / smooth operation by putting an ohmmeter on the leads.

An ohmmeter and or voltmeter Wil be a big help.

The easiest way to measure this would be by using an ohmmeter or a digital multimeter with an ohm setting.

You can perform a visual inspection, and / or use an ohmmeter, to see if any obviously damaged wiring exists but if there are no wiring faults an advanced - level scan tool is needed to diagnose the root cause of Code P2118.

Next, connect the ohmmeter to pins 1 and 2.

To do this, disconnect the IAC valve, connect an ohmmeter to pins 2 and 3 of the valve.

To properly diagnose a P0890 trouble code, a mechanic needs an advanced scanner, digital volt / ohmmeter, a specialized scanner for diagnosing the pins of the Controller Area Network (CAN) Bus harness, auxiliary ground cable, and a CAN Bus system wiring diagram.

The mechanic should also check the continuity of the ground circuits of the various related control modules using the digital volt / ohmmeter.

A sound technical knowledge of working with equipment like amp - meters, ohmmeters, scopes, voltmeters, and loader terminals

Proficient with the use of standardized test equipment and their uses to include the voltmeter, ohmmeter, oscilloscope and computerized test equipment

Use ohmmeters, multi-meter, meggers, and ammeters, to trouble shoot equipment and circuits to make sure they are working properly

Inspected wiring and fixtures for conformance to company specifications and local electrical codes, using test equipment, such as voltmeter and ohmmeter.

Tested electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters and voltmeters.